SAMA V60 Mid-Tower White PC Case, Curved Tempered Glass, 7 Pre-Installed ARGB PWM Fans and Fan Hub, USB Type-C, ATX/MATX/ITX Back-Connect Support, 360mm AIO Compatible, High Airflow Design

Excellent case. Glass side panel and Acrylic front panel. Lots of extra room to work in with plenty of options to route your cables through. Fans have adequate performance for a decent budget build. They are not completely silent but not loud at all. They run at approximately 1500rpm and it's enough that you do feel the air moving from the case. The aesthetics are great and easy to control. All the fans come connected to a single controller which can control the RGB with the default LED button or if you hold the button down for 5 seconds it will work with your other RGB settings in your lighting software like Aura or Mystic Light. If I had one complaint, it would be that the cables from the fans to controller do not come combed out, they are tangled and shoved inside, but for that being the only issue and easily manageable I don't think it is a problem. If you're working on the bottom of an ATX motherboard, you will have to remove the lower back 2 fans but it is simple to do. The magnetic dust filters are a nice addition as well, easily removed for cleaning and don't disrupt airflow too much. It came with all the necessary hardware but I did have to install the forward 3 stand offs for the ATX board. Case buttons and USB ports are good quality with decent cables that aren't too stiff or hard to work with. Overall, I am very happy with the purchase and the way my build turned out.

Très bonne qualitée même les ventilateur les couleur sont vive et beaucoup de choix.

Gehäuse ist aus dünnen blech. Aber es gibt keine negative Beurteilung dazu. Alles in Ordnung und es schaut wunderschön aus. Ich würde an jeden Käufer weiterempfehlen.

I love it, only thing I’m having problems with is hooking up the led lights to signalRGB so I can run all my lights the same colour.

Couple of things: 1) The 7 fan LEDs are controlled by a button on the case that changes color. I dont know if you can put it into a mode where the controller can be fed by a 3 pin ARGB header or not, I just simply picked a color and matched it to the SAMA L60 360mm AIO. UPDATE, hold the led button down for 5 seconds, that will tell the controller to use the ARGB port if you have it plugged into the MB. 2) After you install the MB, just the MB. Flip the case over and unscrew the 3 x 120mm fans on the bottom, let them hang. Continue to wire any items like your case system header, with the fans in place it will be near impossible with large hands. If you fiddle without taking out the fans it will probably take 20 minutes to plug things in. Spend the 2 minutes, remove the fans. do your work on the bottom of the MB and then put the fans back in. Outside of that everything is easy and there is a TON of room behind the MB to stuff cabling. I had 1 SAMA product before, a black widow 1000w PSU which I used a in test system and it was fine, worked, so I took a chance and bought this case, the 1000w PSU in white and a L60 360mm AIO all from SAMA. Everything works, no issues. I came from be quiet! products which are exceptional quality, and pretty pricey. But those cases dont speak to the 13 year old nerd in me. This case does. Only the side panel is glass, the front panel appears to be acrylic, other people have noted that its glass but I can see the waves in the plastic from the molding if I look at it down the barrel. Still looks great. Temps are super good, obvious this is a very positive pressure case, the bottom and side/vertical fans are intake, the rear and the aio are exhaust. I set the fans to 50% pwm and they are pretty silent.