Gosky Universal Mobile Phone Adapter Holder for with Binoculars, Monocular Spotting Scope, Telescope, Microscope

This is solid and well made. It is a fiddle to get the phone lens lined up with an eyepiece but it works very well once set up. I have manages pictures of Jupiter and moons with my first attempt with my telescope. Early days so moon has not been available yet but I am very pleased with this gadget. Update - Have now got some really great pictures of the moon at 100x . I have a 4"" refractor and the results really astounded me. I discovered that shining a torch through the lens of the telescope whilst looking at the phone screen made lining up the phone much easier. This gadget is a bargain !

Well made piece of kit but check that it does fit your equipment. I could only get it to fit my Vanguard scope by removing the eyepiece rubber. Otherwise it does the job well.

I think I made a complaint about this but I clicked on wrong order made same time by mistake. Was one to Amazon so if they contact you just point them to this review, it was made in error and was meant for dobsonian skywatcher 200p and there absolutely shocking customer service if you dont agree to something else they offer on the phone. Everything Gosky I have had including this have always been excellent and did exactly what they say as described. Thanks and sorry if you hear from amazon about a complain to them but once again it was in error and I hit subit before I realised. Can ask them to get in touch with me or simply point them to this review to show them it was a mistake.

I bought this to fit a mono scope . The item fits my iPhone 12 very well. However it does take a little time to correctly align the phones camera with this item. It works best if you use a tripod. Once aligned it does the job but don’t expect miracles. A little fiddling and a lot of patience you will get a reasonable picture. So to summarise this is not perfect but does the job.

It's easy to fit, it works, and once you have your mobile camera adjusted it means that you no longer have to try to adjust you spotting scope stooped over with your eye mm from the eyepiece. It makes the whole thing much easier, and you can take photos. Excellent value for money!

Hard to set up and use. Gave up and just hold phone to binoculars instead

Gets the job done. Quite a bit fiddly to set up and don't expect it to remain in the same position when taking off and putting back on the binoculars, so one has to adjust it each time almost from scratch. However, it is way cheaper than adapters made for a specific phone+bins combination and the results once it is in place are quite good. Attached photos taken using Google Pixel 3 on Nikon Prostaff 7S 10x42 binoculars.

Good easy to use camera mount

kaliteli malzeme, kusursuz tasarım, Celestron AstroMaster 130 teleskop ile yaptığım ilk gün çekimlerinin fotoğraflarını ekledim

Había estado intentando sacar fotografías a pulso pero la verdad es muy dificil, ya que hay que atinarle al objetivo y si tienes pulso de maraquero pues es imposible. Con este soporte se resulve el problema de inmediato, ahora las fotos son nítidas y mejor enfocadas. Es muy bien producto, de buena calidad en tanto material y manufactura. Adempas llegó antes de la fecha

Bought T-Ring adapter for Canon 7i. Well made and is a sturdy mount. Using it with a 10" reflector telescope. The issue I have is with the back focus of this setup, a typical problem with DSLR. The camera sensor is too far away from the focal point which makes focusing impossible. Even with a 2" camera adapter the camera is still too far back from the actual focal point of the telescope. If you have the same issue use a Barlow with the adapter. It works well for planetary imaging, but I find this setup magnifies the moon too much.

This item functions as advertised. I read a number of reviews and was not sure what to expect. It is very simple to use. The phone is held firmly. It grips the eyepeice on my Vortex Razor just fine. It is not that fiddly. I went from box to photo in about 5 minutes without ever having seen this thing before. It is mostly metal with plastic and rubber parts. All the screws and nuts are metal. No plastic threads to strip. I pointed the scope towards my back yard and snapped a couple of flower pics. I will post them if i figure out how. Bottom line - worth the 29$ and 100 times better than free hand.

Pour remplacer le nanar qui était livré avec ma longue-vue, se support de téléphone tient très bien. Le plus difficile aura été de régler précisément bien au centre du trou face au bon objectif du smartphone et bloquer cela. Nettement mieux que les gadgets à trois sous qu'on vous donne dans la boite de jumelles.