Water2Buy Easy SoftTec Resin Cleaner 1L Bottle | Water Softener Resin Cleaner for All Water softeners

Our water softener is 2 years old so when it started to not do its job of softening the water we thought the unit was faulty. I took it out, cleaned it, re-stocked it with salt and still the unit was not getting as soft as it had done from day one. From further research it was suggested I clean or replace the resin - living in the Thames Valley the water here is very hard so thought ok lets try the cleaning route first as it is a fifth of the cost of replacing the resin - and a lot less fiddly. I read the instructions, (wait until your salt level is a quarter of the capacity) used the resin cleaner to do a clean, did two backwashes, ran the taps for 10 minutes afterwards and set it for a final regen. overnight. It's back to being super soft and delighted. Truly awesome to be back to soft water. Upon some further research it is recommended cleaning the resin twice a year - it makes sense when you think about it - the resin takes the hard water limescale so logic says it will need a clean ! Try it if your water softener is not as effective as it once was.

Easy to use. Can't give 5 stars yet as unknown whether it actually works as I'm using it as a preventative. Have previously had salt build up in one of the valves which meant some salty water in the taps when on a regeneration cycle. It took a few years to build up though. Hopefully using this will prevent it. Will post again if anything changes.

I see improvement in water flow and water softness. Good product.

This product is a must have to maintain the performance of your water softener. Plenty of guides available online and does a great job at cleaning the resin bed. I love water2buy products have bought two softeners from them as well as their drinking water kits.

Very easy to use, and it does seem to have made a difference. Water is softer and we are getting fewer water marks on the shower door. You only use a third of a bottle each time, so it’s very good value compared to other brands.

This worked very well tested for sofness after 1 treatment. soft water great product

Our water softener had started to show reduce effectiveness upon adding salt and appeared to need more frequent regeneration. Got this to clean the resin. Water softener now working really well with correct water hardness set. Will use this regularly from now on. Easy to use. Add when salt low and run two regenerations…great 🙂

my 15 year+ water softener was choking off my water flow rates/pressure; ie run a cold tap and the shower turns to a dribble. I did 4 regenerations with a dose each time (so regenerated each tank twice). The pressure/flow rates improved dramatically so a flushed toilet etc no longer causes the shower to turn to a dribble. Also the bath fills much faster. In addition the water is much more silky and I’m not getting any lime scale any more. I wish I’d discovered this product sooner and/or realised how dramatically a soiled resin bed can affect the performance of the water softener.

It's like you can feel the difference in the water (I guess) ;)

El producto de maravilla deja la resina en perfectas condiciones. La utilicé para limpiar la resina del descalcificador perfecto

Provato più volte e direi che funziona. Le resine sono state accuratamente riginerate e l'addolcitore funziona a dovere anche dopo molti anni.

pas mal

Water2buy Soft Tec Wasserenthärter Harzreiniger Vorgeschichte: Hatten uns im August 2017 eine Enthärtungsanlage AS800 -> W2B800 von Water2Buy Enthärtungsanlagen gekauft. Das Gerät ließ sich relativ einfach installieren. Aufgrund unserer hohen Wasserhärte von um die 30 dH und unseres aktuellen Wasserverbrauches (5 Personen) hatte ich mich in der ersten Zeit an folgende Einstellwerte herangetastet um eine gewünschte Härte von 6 dH zu erreichen. Regcapacity 2,5To Backwash 9min Brine 45min Rinse 5min Refil 9min Nach ca. 1 Jahr mussten wir feststellen, dass zum Ende der Verbrauchsmenge hin die Wasserhärte auf bis zu 12 dH stieg. Wir haben deswegen die Verbrauchsmenge von 2,5 To auf 2,1 To gesenkt, um ein konstantes Ergebnis zu bekommen. Nach weiteren 6 Monaten mussten wir wieder feststellen, dass die Wasserhärte anstieg. Haben dann ein wenig gegoogelt und sind auf den Reiniger von Water2buy gestoßen. Hier wurde beschrieben, dass ein z. B. hoher Eisenanteil im Wasser die Oberfläche des Granulates benetzt und die Kapazität des Wasserenthärters reduziert. Wir sind natürlich daran interessiert, die Kapazität möglichst hoch zu halten, da bei jedem Spülvorgang ca. 200 Liter Trinkwasser verbraucht werden. Deswegen haben wir uns entschlossen den Reiniger zu kaufen, Kosten 7,99,- € (für 3x reinigen). Verwendung des Reinigers: Nachdem der Salzbehälter einen Stand von ca. 10cm vom Boden hatte, haben wir ca. 1/3 des Flascheninhalts in den Salzbehälter geschüttet. Danach sollte man laut Anleitung 2 x den Spülvorgang (400 Liter Wasserverbrauch) starten, was wir auch so getan haben. Danach soll man laut Anleitung noch für ca. 10 min aus einem gerätenahem Wasserhahn Wasser laufen lassen (nochmal ca. 200 Liter Trinkwasserverbrauch). Um einen direkten Vergleich zu bekommen, haben wir die Kapazität wieder auf den alten Wert, 2,5 To hoch gestellt. Nach einer Woche, zum Ablauf der Kapazität, kurz bevor der automatische Spülvorgang gestartet wurde, haben wir die Härte wieder gemessen. Wir konnten feststellen, dass Gerät tatsächlich wieder 2,5 To Kapazität bei einer eingestellten Härte von 6 dH hat. Fazit: Der Reiniger hatte Wirkung gezeigt, kann man also empfehlen. Das Wasser hatte direkt nach dem Reinigen keine Geschmacksveränderung. Nachteil ist der extrem hohe Wasserverbrauch, ca. 600 L Trinkwasser durch den Reinigungsprozess.