SODOLA 16 Port 2.5Gb Switch Umanaged,16X 2.5GBASE-T Ports,2X 10G SFP, 120Gbps Switching Capacity,Port Isolation,/1U Rack-Mount/Fanless/Plug & Play Multi-Gig Unmanaged Network Switch

Working well a couple of months in. I had a little problem getting full 2.5 speed at first but believe it was due to windows settings and not the hardware but be sure to test if that is important for you.

Purchased 3x of these switches, from SOLDA to upgrade my home network. I got 2x 6 port with 2 SFP+ and one of the 8 port with 1 SFP+. I have most 2.5G RJ45 ports with cat5e on 2.5G and 1G. One of the switches tied into existing network that uses using 2x SFP+. It runs super cool compared to any other SFP switch I own. Overall the price is an excellent value saving me hundreds of dollars over name brand (for managed 2.5G switches). I have an existing Unifi network and didn't want to spend $200 more per 2.5G Unifi switch or wire in additional networking into my home. Speed: Iperf test TCP with 2 devices with 9k MTU on different ports in parallel for 30 seconds. 2.44Gb/s on one device, 2.46Gb/s on the other. UDP iperf tests showed 0% packet loss, 0.007ms jitter. Features: I am using the following features. All work well with minimal issues. VLANs tagged, native (PVID), and untagged. Jumbo frames at 9k. IGMP Snooping. 3x port LACP Trunk. RSTP with one SODOLA switch as root worked great and without any issues. QOS on Ports. Issues I faced: 1. Admin interface was at 192.168.2.1 and I am under a different subnet. I first plugged it into my PC and setup DHCP and then moved it into desired room. One thing the interface doesn't tell you is you have to go to Tools -> Save to store settings when power cycles. Lost settings a few times before realizing it. 2. My network doesn't have loops, but it went down multiple times during setup. What I found is that STP or RSTP must be enabled. 3. Don't send ICMPs to the switch. I sent 9k ICMPs to test jumbo frames and every time it crashes the management interface and has to be power cycled. All issues were very minor with workarounds.

Really good option for a variable speed compatible 2.5 switch. I bought two, both working like a charm to give 2.5 across my whole network, fully loaded with lots of traffic I've not observed any aberrant behavior. If I need a 3rd, will not hesitate to buy. Quiet, doesn't get hot, just does the thing.

For the price this switch is fantastic. I've yet to have a single connectivity issue that's required a reboot. The heat level it produces is minimal so I have no concerns about heat fatigue causing hardware failure.

The good: It's cheap. It works. Even as a dumb switch, it offers great value for the price. The bad: Cuts corners on security. No SSL (https) for web UI. The web management UI is as awkward as they come. The manual is less descriptive than the UI itself. The VLAN configuration feels like a CAPTCHA had a baby with a Rorschach test. But it works. And it's cheap!

I needed a media converter for my Mac Studio. But I wanted flexibility to do 1, 2.5, 5, 10Gb networking and media converters in this configuration are over twice the price of this device and are unmanaged. And not much smaller than this. I picked this up for less than $50. I got 4 ports that do all the ethernet speeds I wanted and a bonus 2 sfp+ that will do multi speed as well! I have not tested 10Gb thru put as I am still building things but it easily handles my 2Gb internet at full saturation with out ever dropping or slowing down. The web interface is pretty intuitive, although many features are turned off by default, like Spanning Tree which may effect performance. But it also has may other features shown of more expensive switches. The web interface is rather simple, but easy to navigate, and the CLI is like most router/switches with slight variations here and there that are easy to adapt. Makes for a perfect desktop switch for a power user or for someone that needs a few extra ports and wants some exapnability in the future for speeds. The only complaining is to SODOLA (what I affectionately call $50 dola, has a horrible name. but hey, the switch was less than $50 dola and it did everything it was intended to without fault.! .... now if 50dola would only make a central management software to manage multiples from a single pain of glass.....

Works as advertised according to iperf. Do need to set it up first using the specified ip and the instructions aren't the most clear, but it wasn't too bad. I just use it as a dumb switch and not bother with the included functions, and it has been stable for months now.

I am using this as the primary router for my network which is all running at 2.5G. My hard lines to my other routers connect through this router. This works well with my other, other brand routers and my Eero routers / WIFI nodes.

Devo ancora fare dei test di connettività per capire come gestisce i 2,5gbps, allo stato attuale, basandomi sui led tutte le porte dovrebbero sfruttare quella banda. Nel mio caso è collegato in cascata ad uno switch 2,5gbps managed e poi al modem.

there is no offical SODOLA website , phone number or email for support, overall device are good.

2.5 Gbps-Switche sind derzeit noch relativ teuer. Dieser hier ist erschwinglich und beschleunigt dan den Datenaustausch auf meinen Komponenten mit 2.5 Gbps Schnittstellen spürbar. Die maximale Geschwindigkeit wird erreicht.

Sono un installatore di apparati per il networking, ritengo questo switch di buon livello, soprattutto se rapportato al suo prezzo

Uno de los pocos switches a un precio accesible y administrado con 2.5 gig. Simple pero cumple su función.