FIFINE Microphone Arm Stand, Boom Arm Stand with Desk Mount Clamp, Screw Adapter, Cable Management, Suspension Scissor Mic Stand for Boom Stick Microphone, for Podcast Streaming Gaming Studio-BM88

This is an amazing product that I definitely recommend. You have so much freedom on where you can move your microphone. It is very easy to setup. The product looks amazing and is really high quality. Even the box has attention to detail with its textured picture on the front. The arm feels really sturdy and I don't ever have to worry about it falling. This is definitely the best budget and quality wise microphone arm on the market and is worth the purchase.

I have never owned a boom arm before because I never thought it was a necessity. After getting the Fefine BM88, I realised that I needed this is a LONG time ago! The first big thing is that it has freed up space in the middle of my desk. I have my boom arm to the side so I just bring my mic in when I need to use it. When it is isn’t needed, it sits to the side and completely out of the way. You also have to appreciate the solid build of the boom arm. Everything from the branding and the materials used is high quality and made to last - you will only be buying once! Another massive selling point is the flexibility of the arm. You can have it stacked to increase the reach or just have it as a single level arm if that fits your setup. Highly recommend this product and it is now a permanent feature on my desk.

The FIFINE Microphone Arm Stand is a great boom arm if you like a clean, minimalist setup. Overall, I’m very happy with it and it feels solid and well made, but there is one small thing that bothers me, and that’s the bottom section that clamps to the desk. That part can’t be adjusted up or down and basically has to sit flush with the desk. It’s not a huge deal, but there have been times when I’ve wanted to change my setup slightly, and it would’ve been really convenient if that section of the arm could be adjusted. It’s a minor limitation, but worth mentioning. Aside from that, it does exactly what it should. One big improvement for me was vibration and noise transfer. I’m using it with the FIFINE AM8 microphone (which is a great budget mic for those wondering), and when the mic was sitting directly on the desk, the cable seemed to pick up all sorts of vibrations just from touching the desk. Using this boom arm has solved that issue for the most part. If you don’t use noise filters, it can still pick up a heavy knock on the desk or a bit of keyboard noise, but it’s nothing compared to having the mic standing directly on the desk without a boom arm. Just a small tip for anyone in a similar situation, this definitely helps reduce unwanted noise and vibrations. Overall, a great piece of equipment, but I would've given it 5 stars had it been possible to adjust the bottom part of the boom arm!

Been using this for months now, this arm is brilliant, quality is great, never had any issues with it, adjustability is brilliant, have managed to take the twisty level off the bottom so that it’s just the nut to lock it in and it slides behind my Magnus Pro cable tray but still reaches me despite my 45” monitor, so many ways to move this, Fifne make great mics but they also make great mic arms too! You really can’t go wrong with that, easy to hide behind your setup when not using it! (In my video it juggles a bit but I’ve not got it completely locked in as currently adjusting my desk fyi!)

This is a solid low profile boom arm. I've been wanting one for ages which isn't a cheap one that loses tension after a month. This is built very strongly. You can also adjust how tight the movement is. It's very easy to setup and I love the fact that it has built in cable management. Great value for money and looks fantastic.

Love the low profile look, hidden wires and everything but the price really put me off. Ended up getting it and regretted it, after not even 3weeks the screws have all worn down and the locking system doesnt work mic will just drop. Im using their own branded mic and recommended for this arm and its still awful. If this was the price of all the other mics sitting at around 20-30 i mightve given it a second go but honestly cheaper mics come in better quality than this.

The mounting holding the microphone always comes loose and can be annoying. Just to be clear its the tightening screw that keeps the mounting from rotating and holds it in place, even when greatly tightened it tends to get looser and looser, so does the rest of the arm and need to be nipped up constantly. Not sure if this is a normal thing for mic stands but my past stand didn't have this issue and I could just forget about messing around with my past stand upon installation. However, it does feel like its made from good quality and not cheaped out, everything feels solid and it looks discreet as I wanted. Easy to install, anyone can do it of course.

This is so worth the money my pervious boom arm had easily scratched material and couldn't even hold my mic up where this one holds my mic perfectly it doesnt drop cause of the weight of my mic or anything the desk clamp is also very premium cause one thing ive noticed with desk clamps is that they tend to chip any paint or cut into desk wraps because of the metal or the screws but on the bm88s desk clamp is comes with a padding on the bottom to prevent any damage to your desk and if your a fan of cable management then definitely buy this because it absolutely hid my cable when i installed this

Se houvessem 10 estrelas eu as daria!!! Produto excepcional!!! Vale cada centavo pago!!! Muito resistente. Se eu tivesse que dar algum ponto negativo, seria não ter o primeiro braço com articulação vertical....mas isso tem a ver com o modelo, portanto....perfeito!!! Podem comprar de olhos fechados. Sem contar (embora, pra mim isso nem é tão importante) que a embalagem é simplesmente um luxo!!!! O produto é muito excelente! Até no manual que o acompanha! Tudo muito caprichado! A marca ganhou um cliente!!!!

Realmente es una muy buena opción; el soporte es de perfil bajo, te permite ajustarlo de diferentes maneras, así como esconder los cables en su interior.

I bought this arm along with my fifine tank 3 mic and it was very compatible, the arm's material was very premium, it did not feel cheap at all, it had an amazing cable management tunnel that made my desk look very clean and overall it's very flexible, and installing it on my very thick wooden desk was perfect, it absolutely stays in place and doesn't move an inch unlike my previous mic arm.

Pros: Does the Job. Moves freely but with some resistance when screws are tightened down. Doesn't feel sloppy (at least out of the box, time will tell) You can tell its not 200 dollar Boom arm but in day to day use it doesn't seam like it will make a difference. Looks reasonably clean. It it just a single bar design. The logo on the front is a bit in your face but if you view the pictures I added you can see that I removed mine and it looks much better. Excellent mounting versatility. The thread adapters fit my microphone perfectly (Elgato wave 3 with gimble mount) and seams they would fit most any. Above all it can be mounted upside down to the bottom of the desk and the clamp can be removed to allow it to mount with a screw. The stand off that the boom arm mounts to is hollow with a flange at the bottom that works well with heavy thread pan head screw. Functional easy to use cable management. Covers slide off and your cables can be laid inside. It is big enough to fit both my headphone cable as well as Microphone cable. Cost. Its cheap and still will deliver the desired performance of most any recreational gamer. Cons: Ball mount to the microphone has limited range of motion. If your boom arm is at a downward angle, coming from the side of your desk, mounted on top, it can not be adjusted to bring the microphone all the way back to vertical. If your microphone does not have a side to side adjustment it will sit at an angle which is more then anything aesthetically annoying. you hopefully will be able to adjust the mounting location in such a way that its not an issue. Does not seam to be an issue when undermounting the mount. It also sits a fair ways off the desk. If your monitors are less then 4 1/2 inches off your desk the first segment of the boom arm will not clear them. I included some pictures of how I set mine up. Decided to write a long detailed review because I was surprisingly pleased with this product and hope be helpful to others in choosing their products.

Good product