Face Clicky Kit for Steam Deck Handheld Console, Custom Dpad View A B X Y Menu Keys Face Buttons Mouse Clicky Kit for Steam Deck LCD Console - Without Console

Product itself (with LCD in mind). The install is super easy, their tutorial is very clear and didn’t bring any confusion. Overall quick install, took me about 10-15 minutes. Clicks do vary button to button but that’s to be expected, clicks are sharp and you KNOW you pressed the button. The pause and select buttons being clicky is a very welcome change. Really recommend this for people that don’t have an issue with sounds/late night gaming. Yes, I know they don’t promote OLED compatibility. I attempted it either way. The cables are very much different, and while it ‘fits’ and functions, it can pretty easily be shifted and moved. So yes it functions and could be fine. If you plan on never opening up your deck again, if you travel a lot, I wouldn’t recommend it for OLED, FOR LCD it is completely fine no issues whatsoever. For me someone with an OLED and doesn’t travel and will open it up again… more than happy with the compromise for the moment. I ordered mines for my OLED (if it didn’t work it would go in my partners LCD)… didn’t even take 2 days before she ordered a pair for her deck.

Good kit, 5.5/10 to install. No hair dryer needed. Makes buttons feel good and clicky. Take your time and remember to put the proper screws into the right spots. Don’t over tighten as they strip easy

First thing, I enjoy these over the default membrane buttons, but they aren't the 'right' click for me. I was kinda expecting something along the lines of Razer's mechanical gamepad buttons. These are 'chunkier' in feel and require about twice the force to actuate than the Razer pads. I'd say they even require more force than the default buttons do, and it's noticeable harder to spam an input. With that being said, it's also nearly impossible to make a false input by mistake. I'm not sure if this is a universal feature for everyone else who's installed these buttons, but each one feels different. Start and select feel the same, but A, B, X, & Y feel different from one another. X feeling the best, then Y, followed by B and A. That's where I dock points, if it wasn't for that they'd be 5/5 Installing these was pretty easy, at first it felt like I was destroying anyway for my steam deck to ever have face buttons, but it's really just that blunt of a process lol. I used a hair dryer to remove the original receiver pads and rolled on the new mechanical pads no problem.

I 100% consider this product to be 5 star quality. The switches, the documentation, the ease of installation (I was doing a shell swap, so swapping the button switches was very simple) are all of great quality, hence the 5-stars. But I will caution people the make sure they really want the clicky buttons. Using my steamdeck on a plane recently made me feel like a jerk for making so much noise, and playing anything while my wife is asleep is now out of the question. So I somewhat regret the swap on these cases. Like I said though, the product itself is amazing, works exactly as advertised, but make sure that you really want them before swapping them out.

Took me 4 hours to do it right but it was absolutely worth it. Important things to note: - There at least 3 seperate times in which you must use a specific (shorter) screw in a specific place (center bavkplate, center aluminum shield, off-center of daughter boards). - If you have the JSAUX case with the aluminum plate on the back then you will have to carefully peel back the thermal pad on the aluminum shield to reveal the screw covered by the foil. - Make sure the ABXY buttons / D-pad is aligned correctly. If they aren't the buttons will be sunk into the shell and feel terrible to press or won't be usable at all. - The D-pad has a "windswept" curvy bit on one of the directions. This bit should point outwards from the Deck. - The "bumper assembly" is imo the trickiest bit to work with. If you don't reinstall it correctly then your buttons / d-pad / bumpers will not be flush with the case and or will not properly click or actuate. This is what caused me to take 4 hours to figure out why my buttons felt awful. I did this mod specifically to play Tomb Raider Remastered 1-3 and its AMAZING!! The stock D-pad on the Deck is just sttaight up unusable. As a bonus my buttons have less pre-travel and don't wiggle around in-place as much. They're less noisy and don't rattle as much either.

Do not buy. They work great until the switches wear out in less than a month and a half. Sure they can send you replacements but how many times do you feel like opening your steam deck to replace them? I had no issues for a few weeks, then they started losing the tactile feel. Not ideal but not a huge deal. What is a huge deal is now my buttons straight up lose inputs. I can be holding a button and it will just actuate the button then let go of it. And about 50% of the time I will press the button and it doesn’t respond at all. Horrible quality, and after they break you have to press the button with an uncomfortable level of force.

Ottima mod, per quelli che rimpiangono i vecchi bottoni a microswitch simile a quelli del GBA, con la differenza che questi cliccano parecchio di più.

Je redécouvre mon stream deck quelle plaisir ce bruit Très facile a installer

Much prefer this over the default buttons. The tactile click is much more satisfying, and doing the replacement was easy

Buttons feel amazing and dose improve on the user experience to feel more premium over the preinstalled membrane buttons. Installation is not to hard if you take your time. But if a button stops working down the line you can’t really go back not this company’s fault it’s just the way valve designed the steam deck. However I did have an issue where my start button stopped working. it turns out it’s just user error on my end I did not put the ribbon cable all the way in. I did have an issue on the other hand the rubber button they give that sits in between the button and the clicks button gave way and my A button got very hard to press. They do give a spare but I would love to see a more durable silicon to be use just like the valve original. By the way now I am using the spare one it dose work great. To be honest it’s a great product. I am always cautious of mods like this I am scared of a button failing but I can’t go back to the membrane one stock ones and I have ordered another set just in case something happens. Thank you extreme rate for getting in touch I will let you know I was at fault for the start button having issues. I don’t suppose you could add a line on the ribbon cable to see where it’s suppose to sit the tabs that need to be inside the lock are a little hard to see and that’s why I had a little trouble. Over all it’s great and would recommend.

Una mejora imprescindible