BETAFPV 5pcs Air II Canopy with 15°-45° Adjustable Camera Angle Compatible for 9-10mm Camera Lighter Whoop Drone and DIY Ultra-Light 1S Drone Like Meteor Series Drones

This is version 2 of the canopy. The original had a minimum angle of 25 degrees but some of us newbs can not fly that fast yet or maybe we just want to cruise around once in awhile. This version 2 allows a 15 degree angle. To clarify a higher angle makes you fly faster because you are facing up more therefore applying more throttle to be able to see whats ahead of you. A lower angle lets you see straight ahead and you wont need as much forward throttle to see straight ahead. INSTALLATION: Use a heat gun and gently bend the canopy to get it closer to the shape it should be when installed. In other words the canopy comes kind of flattened and needs to be bent to fit on the drone. Use the original as a template. My first replacement broke right away because I did not do this. After bending look near the top of the camera to see if there are lines across the plastic, that means it was bent too harshly and will crack in that spot. I have also had good luck applying e6000 onto the lines before it cracks.

Very light. Very durable. Its VERY hard to 3d print anything lighter than this with TPU. My only take back is its hard to achieve the 25 degree angle i like to fly indoors even on the last screw hole. I either fly it without the rear screw in (does not get jello) Or with a small drillbit expand the last hole a bit, shove a tiny air elastic through and hook it under the triangle on the back of the air65 frame but thats noy necessary at all...the only reason i fly anything else is for vatiety bit this really is yhe lightest and strongest out there.

break fast colors are nice

These canopies are impressively lightweight and durable. The adjustable camera angle from 25° to 50° allows for versatile flying styles, and the variety of colors adds a nice touch to my drone builds. Installation was straightforward, and they fit perfectly on my Meteor65 frame

I use these micro air canopies on whoops to 3" toothpicks and everything in-between. Works great for the Caddx ant and ant light, also the Betafpv C03. I like how you can use the light versions of cameras and with this canopy, have the ability to change the camera angle quick and easy, where in the past had to adjust the angle by adjusting the front canopy mounting screw hoping to get the desired angle. Now just simply remove the rear holding screw and move to the next cam angle hole. No guesswork to it I will purchase more for future builds.

Replaced all my old beta canopies with these, shaved some grames off the whoops and has the adjustable camera angle, so nice!

I like the adjustability. However, they are difficult to install and break easy.

Ingenious, love it

Super teile. Warum gibt es keine mehr zu kaufen?? Bitte wieder reinstellen ich brauche dringend nochmal solche schutz dinger. Die sind super, natürlich draußen im winter bricht schnell aber das ist normal. Drinnen in der Wärme halten sie super. Die die sich beschweren haben linke Hände. Passen perfekt rauf. Würde ich sofort noch 5x kaufen. Top.

Great product, fits for my hs210 camera mount.

It baffles me people vouch for betafpv products. They're affordable and they're fun, but the quality control and quality overall is bad. They're always breaking, and these canopies are no different. They didn't even survive the shipping, it looked like old PLA 3D prints that become brittle