MAIWO M.2 NVMe to USB Adapter, USB C M.2 NVMe SSD Reader, USB3.2 GEN2x1 10Gbps with UASP Trim, 8TB Capacity, Tool Free Lay-Flat PCIe NVMe Dock Enclosure

I've use this to clone a Crucial P3 1TB from an old Toshiba NVMe and I've recently used it with an WD SN530 1TB on a Surface pro 7+. This adapter is so inexpensive but it works for everything I've needed it for. It's not going to give maximum speed for what some of these chips can do but it gives you more than enough speed and I believe I was getting about 300 MB per second during my heaviest cloning. Which was fine for my application. There's only one small issue I have with it and it has to do with the plastic enclosure. The plastic enclosure has a slot that you have to get your NVE chip through in order to make a connection to the actual port inside. You can see the port through a little window. The problem is this slot is exactly sized to the drive's width so when I placed the heat sink on the drive in order to place it in my Surface pro 7+ the heat sink made the drive slightly too wide and I could no longer insert it in the adapter. I had to use a whole other adapter to test out the final heatsinked drive. That was a minor irritation but could be a big issue if you're using any kind of heat sink. I didn't feel like trying to break the enclosure open or try to file the slot larger. They made it for bare drives only, please consider that when purchasing. I've also use it on devices that are low power and for the most part I didn't have a big problem but I'm unsure with some modern NVMe power requirements if you could use this with a USB-C hub or not. Likely not. Considering how inexpensive it was it was exactly what I needed so I'm thrilled with the purchase and will keep this for future uses. If you're looking for a full-time enclosure get something with the heat sink made of metal. This is for temporary use only but it does the job well and I experienced no disconnects or other oddities with the adapter. I recommend it for cloning and quick data recovery.

Works perfectly for using connecting an internal SSD to another device. Needed to get things off an SSD from my fiancée's broken laptop and this made it easy.

Works exactly as intended, gets a little toasty with longer term use though.

Works but I have to format the drive first. Then I tried to do drive migration with Samsung magician because I am using both Samsung M2 NVME drives. I can open and use the drive on the USBc but can not do a drive migration using the software because the software does not recognize it. I'm sure if you are just going to use it for storage and transfer it will work but not for what I intended to do when upgrading my smaller SSD to a larger SSD. Will just have to try and find another way.

only had for a week but transferred 1tb of data to ssd at 700mb/s without issues. i was experimenting after continued bus errors from a rtl9210b enclosure on a arm board with linux ext4 formatted ssd. i got recommended to try a jms583 controller and this seems to have solved my problems. runs slightly warmer than the rtl9210b but great heat management nonetheless. very pleased thus far. will purchase a couple more without the odd design and have a full enclosure and use this one as a backup.

Works as intended...more elegant options out there

Very convient for test nvme ssd usage status. but it doesnot help heat dissipation.

Works perfectly. I work in IT and needed something easy to transfer data. This worked well. Better that the external housing ones. For me this works best no need to mess around with cases. Just plug in drive turn unit on a boom. Done. Great value for money. Good size. Easy to use

Works good. Very handy!

Este adaptador es una herramienta muy útil para hacer respaldos de información de unidades M.2 de equipos que se dañarón y no hay manera de recuperar directamente la información, el conector es USB C, pero funciona perfectamente con adaptadores USB C a USB A, si tu equipo no cuenta con puertos USB C, solo baja un poco la velocidad de transferencia, también lo puedes usar con puertos USB 2.0, a menor velocidad de transferencia, pero lo importante es recuperar tus datos y archivos importandes de la unidad M.2.

Reconnu du premier coup par Windows, autant avec un nvme PCIe SSD 2230 que 2280, fonctionne très bien et rapidement.

Excelente equipo ya que te saca del apuro para poder respaldar los nvme

So much more convenient to use than an external enclosure! No need to deal with screws if you have a lot of spare NVME's and you want to transfer various things to and from the system!