ArmorPoxy Garage Epoxy Floor Kit – 100% Solids - 2 Part Industrial-Grade Coating w/UltraGlaze Topcoat | DIY Slip & Hot Tire Resistant |300 Sq Ft - Designer Gray - 17 pc kit

After binge-watching a ton of epoxy floor makeover videos, I decided it was time to give our garage a serious glow-up—and Armorpoxy seemed like the perfect choice for the job. We’re in the middle of a full garage remodel, and this floor was the foundation (literally) of the entire vibe. Between work and life, the project took a couple of weeks to complete, but the results were worth every bit of effort. I used two kits for my standard two-car garage, and that ended up being the sweet spot to get full coverage and the finish I wanted. The product itself was solid—good consistency, easy to apply if you follow the steps, and the final look? Sleek, clean, and seriously elevated. The space already feels brand new, and I can’t stop admiring the shine and texture. I’ll be back in a year to post a follow-up and see how it’s held up over time, but for now—this kit definitely delivered. If you’re on the fence about it, go for it. Great product, great results. Brand new floor, brand new vibes.

This product was awesome, the 600 square foot kit was perfect for a 2 1/4 car garage. The kit had everything needed for the job and made the process so easy. I followed the instruction thoroughly step by step with the results being amazing. For a month now i have been parking on it and it has held up so far!

Our garage remodel turned out great. The instruction are clear and direct removing any guesswork. The kit came with almost everything we needed. Square footage is true to size quoted. We heavily covered 800 sq ft with a 900 sq ft kit and had a small amount of product remaining. It went down easily, looks professionally done at a fraction of the cost. I’m satisfied and glad we went with this option

I like it when it's new, but hard to clean to original quality, I'd say. Plenty for a 3 car garage! The tires like to turn spots yellow and not easy to remove it.

I invested in this epoxy expecting a premium, durable product. However, just three months after installation, it’s peeling and lifting from the floor, leaving me deeply disappointed. The surface is already has tire marks, and the overall quality has not held up. I am really disappointed with this product.

Our garage remodel turned out great. The instruction are clear and direct removing any guesswork. The kit came with almost everything we needed and some stuff we didn’t need (shoes clip ons / brushes). I ended up getting a few better quality brushes, tape, small roller and muriatic acid. Square footage is true to size quoted. We heavily covered 580 sq ft with a 600 sq ft kit and had about 1/10 of the product remaining. It went down thick and smooth, is durable and looks professionally done at a fraction of the cost and I kept the control to be as OCD as I wanted. 16 hrs of prep and 5 hrs of putting product down. I’m satisfied and glad we went with this option.

Fantastic kit and highly recommend. This kit saved me so much time of piecing together all the equipment I would need. You need to buy this stuff anyway, why not do it in one shot? I have seen the kits from big box stores, this is the next level. A great way to get a professional look from a DIY project. Garage is roughly 550SF, new, poured 7 months prior with zero car traffic. Prep Day: Powerwashed then used the Etching solution worked great on my floors. Powerwashed off again and let the floor dry. Used two 10oz tubes of Sikaflex self leveling joint sealer on the cracks around the perimeter. Base Coat was delayed 1 day due to heavy rain, high temps and 100% humidity. Don’t force it if the weather doesn’t fit your frame. You work on the material’s schedule, not your own. The 600sf kit contained plenty of material for my garage, the sides and even a couple of steps. Clear coat went on just fine after allowing base to fully cure and dry for 36 hours. Things I learned during the process applying: 1) Thorough reading the instructions and watch the videos provided at least once. 2) Base coat, make it a two-man job. The constant rushing of 20 minutes to mix/squeegee/roll/ flakes can get messy. And the base coat sticks to everything. One person to mix and pour, one to spread, roll and flake. 3) Don’t freak out if it looks thin when squeegeeing. It evens out on the rolling. 4) Commit to whether you are doing side walls before the rest of the floor. 5) Pre-measure the Part A, Part B and flakes based on how you will be applying. I did this in 3 parts for each bay to maximize my timing. This way you don’t go too heavy flaking on one bay over the others. 6) I wanted a heavier flake and bought my own 12lb bag of black/white/grey to address the nearly 600SF. Kit comes with 6lbs. 7) I used vinegar and paper towels to get the resin off my hands and arms, but NOT for applying directly to surrounding concrete; it will stain.

This product was exceptional, from the instructions to the application. Armorpoxy has made it so the lay person can complete this job such that it appears to have been done by a professional. I love the color, the kit comes with all necessary tools, and the customer service was extremely responsive when asking questions on application in borderline too low of a temp to apply. Things I’d advise others in: Before applying the flakes, divide the large bag included into sections equally for however many sections you will flake. I started to run out of flakes by my 4th section leaving some inconsistencies in distribution. I’m extremely pleased with the product and would use armorpoxy for any future projects.

Nice product… arrived early. Applied very easily and looks nice. One bit of advise is to use a degreaser on any oil or grease stains and then clean them well. As far as the chips are concerned, just through them up into the air and let them fall and you’ll love the job. I applied the top coat and found that it was easier than painting and 1 gallon went a long way

This kit was good and im very happy with the finished floor. Cost was more than the kits you buy from big box stores but was worth every penny.

The product was as advertised with all the parts needed to complete the job. The instructions were good. The product installed easy. The coverage was more than advertised. I had 184 square feet to cover and wanted to put two coats of the epoxy down so ended up ordering two 300 square feet kits. I was able to do the two coats of epoxy with the one kit and do four coats of top coat with one kit. I used one package of flakes for a heavy coverage which hit any imperfections. I think it turned out good and looks really nice.

The armor poxy is an amazing kit, the hardest job was the prep, i rented a diamond wheel grinder instead of doing the acid etch, and did all my basement and backyard 12x12 shed. I habe 550 sq.ft in total and the 600 sq.ft kit was perfect. I really like the finish of it. If i had to do it again i'd buy the same kit, but i would maybe put a little bit less of anti skid powder in the clear coat. I put all the bag in the gallon of clear and you really feel the anti skid, maybe a little too much. I never bought the big box epoxy kit but i'm pretty sure that the armor poxy will outlast any other cheap brand since its a 100% solid epoxy!

Nice product. It is worth the extra dollars verse the box box 2 part epoxy comparable. Sq Ft coverage coverage is pretty accurate. I had 400 sq ft so I got the 600 sq ft kit and had about 1/3 left.