Kreg PRS3040 Precision Router Table Insert Plate Levelers

This system made installing a router plate on my new router table a cinch. Instead of having to leave corner wood supports to support the plate in my plywood base, I was able to remove the entire subsection under the plate making for an easy installation. I think I installed the leveling pins upside down as it seemed easier to turn the leveling screw from the top than from underneath the table to level the plate (removing and replacing the plate to fine tune it). It would be even easier if the studs they provide for this had an Allen head socket on each end. This way the levelers could be adjusted from the top and bottom. Instead, they only have the adjustability on one end of each stud leveler. There is enough reach for these levelers to work up to the 1 1/2" thickness of my base, but probably no more than that as the levelers would be too short. All in all they seem like a nice way to make a job easier. Hope this helps.

These make the process of building a router table top much easier. Just cut the hole the shape of your router plate all the way through the top and add these. I just threw them up there and screwed the in but one of the holes didn't line up. Had to move that one. My own mistake but it was a easy fix

As described. Factory Kreg product. Thank you

If you're serious about precision woodworking and router table perfection, the Kreg PRS3040 Precision Router Table Insert Plate Levelers are an absolute game-changer. As an avid woodworker, I recently upgraded my router table setup, and these levelers have made a world of difference in the accuracy and ease of use. Installation was a breeze, thanks to the comprehensive instructions provided by Kreg. The levelers fit seamlessly with my Kreg router table insert plate, creating a stable and level surface that is essential for achieving flawless cuts and joints. The attention to detail in the design is evident, and the build quality is top-notch. One of the standout features is the micro-adjustment capability. Fine-tuning the level of the router table becomes a simple and precise task, ensuring that every project is executed with the utmost accuracy. The ability to make minute adjustments is a boon, especially when working on intricate joinery and detailed routing tasks. Durability is a key factor for any tool in the workshop, and the Kreg PRS3040 Levelers do not disappoint. Constructed from high-quality materials, these levelers provide a solid foundation for the router, minimizing vibrations and enhancing the overall stability of the setup. What sets these levelers apart is their compatibility with various router tables, not just limited to Kreg products. This universality adds to their value, making them a versatile investment for woodworkers with different table configurations. In summary, the Kreg PRS3040 Precision Router Table Insert Plate Levelers are a must-have for anyone seeking precision and reliability in their woodworking projects. From easy installation to micro-adjustments and universal compatibility, these levelers have earned a permanent place in my workshop. If you're serious about achieving perfection in your routing tasks, look no further – Kreg has once again delivered a stellar product. Highly recommended!

These are just outstanding. They are easy to install, easy to set up, easy to adjust and will work with any router plate. What's not to like I particularly like the fact that you don't have to use a rabbit for plate installation. Nothing bad to say about them. I will never mount a router plate without them again. I highly recommend.

I sold my old Grizzly table saw and with it went to router table and storage cabinet. With my new table saw, I had to build another router table. I had my big Hitachi router fixed to a 1/2” plexiglass plate but no table. So I started building my fourth router table. In the past I would cut the hole in the table smaller than the plate, the rout a rabbit to fit the plate. Using various leveling techniques to get the plate perfectly level with the plate. Generally it’s a tedious, time consuming and frustrating task. I bought these corner adjustment gadgets that eliminated much of the frustration getting it level and the construction is simplified. Just trace the outline of the plate on your table. Drill a hole for your jig saw and saw close to the outline. Double sided tape stick straight boards to the outline and use a pattern bit to rout to the line. Clean up the corners and install these corners from the bottom. Drop your router and plate into the hole. It should fit perfectly and resting on eight adjustable set screws. Just use the set screws to level the plate with the table. Once you have it level you can then screw down the plate to the table to lock everything together. No shimming, taping or making your own screw adjustment system. For the price, I know that plate is level and if it ever need adjusting, it’s a simple turn of a screw.

These work well and the price was right. Very easy install. I had planned to just rabbit out the benchtop and drop the router plate in, but read a number of horror stories about that. But...I decided to try it anyway, and got these as a backup in case it went wrong. Even though I took my time, ended up butchering it. Lucky I had these mounting corners; they saved the day. They are sturdy and come with everything you need to install them (even a Kreg square drive bit).

I built my own router table and needed a better way to level my router plate. These under table levelers are built really well. They fit my table perfectly and provide a perfect adjustment. Others were priced higher but you can’t beat the value you get for the price of Kreg hardware.

Good quality and easy to install. Fit my table perfectly.

Semplicemente perfetto

todo perfecto

Materiales de buena calidad, son mejor de como lo esperaba, grandes, sólidos y utiles

What a great idea saves messing on trying to get table top routered out exactly. They are easy to fit and level the plate exactly