Sinoparcel D2S Xenon HID Headlight Bulbs - 6000K 35W High Low Beam 66240 85122UB 66040 Replacement Lights -Pack of 2

I liked these so much I bought an extra set. 2014 Camaro convertible LT/RS with factory xenon headlights. I didn't realize it, but my headlights will dim before they burn completely out. These bulbs fit perfectly and the color temp is amazing - makes street signs and lines on the road "glow" and reflect MUCH better. BONUS - they even come with gloves so you don't touch the bulbs during installation. These are THE BEST !! Great product.

Great product for the price. Perfect fit.

Best addition to my Lexus EVER! I had my low beam headlights adjusted at the dealer, but my nighttime vision was still lacking UNTIL - Until I replaced my current headlight bulbs with these. WOW! WHAT a difference these made. My field of vision is wider and deeper than ever before. THE SLIGHT blue tint is also helpful to me as an older adult. I cannot say enough good about these bulbs for YOUR auto. The only thing I can't comment on is the longevity of them, which isn't an issue for me thusfar; hopefully it won't be for a very LONG time. But, aside from that, I highly recommend these bulbs!

So, I haven’t actually tested the bulbs; however, just for anyone wondering these are 8000k temp lights which unfortunately for me is illegal in California. California law requires white light (4000k-6000k) above 6000k turns the light blue and is less bright than legal standard. I didn’t see anywhere on the listing of the Kelvin temp I also was able to buy them and ship them to myself in CA, which should have said “not available for delivery location,” or whatever they say. I’m going to wait until tonight to see how well the bulbs actually work but still illegal in my state and I don’t need CHP finding a reason to pull me over. ******update; Had myself and my two roommates look at the beam at night, a **** ton brighter and definitely 8000k, closer to 6000k it’s still yellow/white but so much brighter than the bulbs (according to service records, original 20+ years old) I had in the car, not sure about longevity but as far as working, brightness and ease of install I recommend.

Update: Bulb Died After 1 1/2 Years. Extremely frustrating because replacing these bulbs is a pain in the butt. Perfect fit for my 2009 Mazda 6 2.5 l. OEM bulbs sell for around $150, so these are just a fraction of the cost. Well worth it. I'll be honest, it's a bit of a pain replacing the low beam bulbs on a Mazda. You have to remove the plastic body panel on the inside of the wheel well. Not completely remove it, but remove enough of the plastic clips so you can pry the panel down and reach the bulb. A couple of tips: remove the 4 screws underneath the front bumper that are holding the plastic wheel well panel in place. I watched a few YouTube videos where they we're struggling to gain access to the bulb, but removing those 4 screws makes it so much easier. Also, using a floor jack to lift the front end does give you a few more inches of much-needed clearance. Remove the round gray water tight plastic cover. You only need to rotate it a few degrees to unlock it. Next you remove the electrical boot by rotating it. There's an arrow on the boot itself which tells you which direction to rotate. After removing the boot, there's a metal clip that holds the bulb itself in place. You just have to press the clip toward the front of the car, then in toward the center of the light bulb to release it (you have to undo the clip on both the right and left side of the bulb). Then you can just let the clip flop down like you were opening a mailbox. Allowing the metal clip to flop all the way down gives you the needed clearance to easily slide the bulb in and out. These replacement bulbs came with white gloves, so you don't risk getting the bulbs dirty and having them burn out. There's quite a few YouTube videos showing how to replace the bulb, but it's such a tight space you're working in, that I didn't find any videos with good camera angles. I'm sure my steps seem confusing, but combined with a YouTube video, maybe they'll help someone out.

They work great. I would say just like OEM headlights.

They were just as described !!!! Worth the money

Put these in my son's 2016 Subaru Forester about a month ago. I honestly think the visibility is better than the OEM bulbs that were in there (I've owned this car since 2015). They fit perfectly with no installation issues and to simply put it work. To purchase just 1 at the local auto store was 4x the cost as the pair here, so we'll have to see how long they actually last. The gloves were a great touch for installation. Again, 1 month into using them and I think they are doing great.