- MEEDEN Wood Drafting Table & Stool Set,Artist Stool and Craft Table with Adjustable Height,Tiltable Tabletop for Artwork, Graphic Design, Reading, Writing

Great quality, easy assembly witha partner. Real wood! May e difficult to raise and lower without help, but once its set its beautifully and sturdily made.

This draft table is amazing! Super easy set up. Easy to adjust to your height. Size is perfect for me but I’m also a small artist (4”11”). I’ve had it for month now and it’s my go to table now for both digital and traditional art.

I bought this for my wife (anniversay was wood) thinking that while its composition was perfect for that - would she really find it useful? I got a resounding YES on this - she does Diamond Painting and had been complaining that huddled over a table was hurting her back. Now she can angle this table comfortably, and is well on her way to finishing a huge 24-x36 diamond painting. The quality is superb. The stability is excellent and it's easy to adjust. All in all, very pleased with this purchase!

What a great drawing table. With all the choices available on Amazon, nostalgia won out as this is table is similar to the kind we had in my high school art classes, many years ago. After I placed my order, I was a bit concerned of the quality of a solid wood table at this price. It turns out that the quality is very good. It's a very solid table when put together. It's not a huge table but its size is more than adequate for most people. The height is adjustable. I'm six foot, and it didn't take raising it much to make it comfortable for me to use. It still has another eight inches, or so, before it would be fully extended. I really like this table. The only reason I didn't give it five stars is because of the assembly instructions. The instructions are fine as assembly is fairly simple. However, my issue is with the hardware list. They give you no info on the sizes of the screws and bolts. I have a cat who is a kleptomaniac. She has a thing for coins, screws, nails, and bolts. When I took everything out of the shipping box, all the hardware was there. When I was nearly finished putting the table together, I left the room for a couple of minutes. When I returned, I soon discovered a bolt with a star knob attached was missing. I'm assuming my cat took a liking to it and made off with it. I'm sure it's somewhere in the house but who knows if I'll ever find i? A trip to a hardware store will solve the problem, but the instructions do not include the diameter or length of the bolt. I'll have to remove and measure the other one to get that information. The second picture shows my temporary solution. The screwdriver that is included with the table fits perfectly through the hole and in the teeth of the adjustment arm. Still, most assembly instructions include the sizes of the included nut, bolts, and screws. Other than that minor issue, the table is great, and I would recommend it to anyone looking for a similar product. Just make sure your room is cat-free when putting it together.

This is a great art table. It didn’t take too long to assemble. I like that the stool is height adjustable and how large the surface is. I can comfortably work at the table for 5-6 hours.

This is a beautiful piece of furniture. As others have noted, it is challenging to assemble without another person, but I did it - and I am a small, older woman. I was actually pleased with the assembly as the instructions were fairly easy to follow and the pieces fit just as they were supposed to. The pieces came all sorted out and labeled, making it fairly simple to follow the pictures. I wouldn't have wanted to do it without my cordless drill/driver, however, as this is real wood and getting the screws in by hand would have been beyond me. I purchased this because I want to draw and paint while standing. A regular easel is more upright than I want for my current work. I had found myself using my kitchen countertop which was not really a good idea, given that I often mix my own paints from pigments that are toxic. I was able to adjust the height of this drafting table to be the exact height of my kitchen counter and tilt it to a slight angle so that it is easier on my neck than bending over a flat surface. Problem solved! So what is the major disappointment? It is very difficult to adjust the height of the table and the angle of the drawing surface. Somehow I had imagined that, once assembled, I could turn a knob or something to make the adjustments. No such luck. If I want to raise the height of the table, I have to be able to lift and hold the table surface at the desired height while tightening the knobs on both sides. This surface is heavy and wide - it cannot be done this way, at least with just one person. If a strong person was holding the tabletop up, the other person could tighten the knobs. But, even then, one has to be sure that the surface is held level or your surface will be slanting from left to right - not the kind of angle an artist wants. A similar problem occurs when trying to lower the surface, unless you want it at the lowest level (in which case you loosen the knobs and let the side pieces fall to the ground). It is possible to adjust the height with the table upside down - but one doesn't really want to have to turn a 40+ lb table upside down to adjust its height. And, even then, there is the dilemma of being sure you have raised or lowered it the same amount on the left as on the right. Fortunately, I found a way to get the table at the height I wanted and I don't anticipate needing to change it (or at least wanting so badly to change it that I would go through all of this again). I'll let you in on my secret in the event that you find yourself trying to do this by yourself like I did. I took 6 reams of printer paper that I had on hand and put 3 on each side of the table. I lifted the tabletop, pushing them under the side pieces with my foot, so that each stack held up one side of the table at exactly the same height. I then tightened the knobs and pulled the stacks of paper out. One could use 1 or 2 reams (or some other sturdy pair of objects of equal height) to achieve different heights. Adjusting the angle of the table has similar dilemmas but I got lucky and was pleased with the first angle I tried. I'm not going to mess with it. Given this significant difficult in adjusting this adjustable table, by all rights I should give it less than 5 stars. It seems that a company that can design such a beautiful table and make it easy for a non-handy person like me to assemble, should have come up with a better system for adjusting height and angle. However, I just can't given it less than 5 stars. I simply love the table too much.

I got 2 of these back in Sept of 2021. They are still going strong. We both love our drafting tables. when we moved we took only 4 pieces of furniture and these 2 drafting tables were 2 of those 4 along with an antique chest and our vintage mid century dining set. we have taken them apart and put them back together twice now and have never had a problem with them. They are still very sturdy with no wobbling at all. I did end up lightly sanding mine with 120grit about 2 years ago to smooth it out more and i finished it with tung oil but that was after 3 years of heavy daily use with lots of water for watercolor painting. if anything happened to ours we would buy them again.

デザイン的にも気に入って、予定表を貼ったり、何かを設計したり。これに製図用のアームを取り付けると、本格的に製図ができます。お好みに角度を立てて製図ができるので紅の豚のフィヨになった気分で、仕事もはかどります。

Facile costruzione, solido, dimensioni perfette

Soy dibujente profesional, compré esta mesa para sustituir otra metálica de unos 100-150 euros de las que abundan aqui. ESTOY ENCANTADA. Tardé como un mes en abrir y montarla porque vi opiniones que ponian que si el montaje era complicado, que si requeriria taladro porque los agujeros estaban mal... y dije uff esto es para un domingo larguete. SE MONTA EN 10 MINUTOS, la ferralla es de calidad, todo ajusta al milimetro, y queda super sólida. Imaginad un montaje de ikea pero de madera maciza, mejor pensado, y mas robusto. Tambien vi alguien que decia que era madera sin tratar. Es madera al natural, pero está tratada con un barniz satinado muy bonito. Cero astillas ni rugosidades. Se parece a otros muebles de estudio que tengo de la marca MABEF, por si os haceis una idea de la calidad. El tablero es de contrachapado no sintetico, natural. Está muy muy bien, pero si echais agua encima se fastidiará, hay que ser cazurro. Se puede dar una capa de barniz epoxi o ponerle un forro de PVC para eso. Tambien es un poco pequeño, pero las patas son tan robustas que sin problemas se puede acoplar una tabla facilmente el doble de grande encima, que es lo que he hecho. En su posicion mas baja, y con el tablero inclinado, vale para niños, o para gente que le guste dibujar medio agazapada como yo. En su posicion mas alta, es una mesa alta de dibujo muy digna. En resumen, es buena, bonita, barata, facil, super-customizable, robusta, una maravilla, y SOBRE TODO MIL VECES MEJOR QUE LAS METALICAS LOW COST QUE VIENEN CONSTRUIDAS POR UN SADICO empeñado en que os dejeis la espalda, las rodillas y las espinillas en todos los picos y travesaños traicioneros que les ponen.

One of the reviews says that it's really short but I think that person just hasn't realised it is height adjustable, once on the top setting the bottom of the board is above normal desk height. The instructions come with a screw driver and it's all really straight forward to build.

Nice table, easy to assemble. Very stable/ sturdy with height adjustable system. Fits well with my other furniture. Very pleased thanks