GELID SOLUTIONS GP-Ultimate 120×20x 1.5mm Thermal PAD Single Pack (TP-GP04-R-C)

Ok

Don't know if the batch I got was old or if that's just how this stuff is but whatever you're pasting better be perfectly level because this stuff is harder than a priest at an alter boy convention.

I bought this because my Mrs. RTX 3080 memory temps are 110c when mining, even when the PL is 50%. That's the max temps for the memory. So technically, it is throttling. I own other GPUs, the RTX 3070 LHR, the RTX 3080 Ti (LHR), and the RX 6900 XT. They have very cool temps (70c - 80c) stock when mining. So I went and bought the 1.5mm and 1.0mm thermal pads from GELID. I applied the 1.0mm thermals pad to the memory. The 1.5mm between the heat pipe and the metal plate (nearest to the power connectors), AND between the heat pipe and the VRMs? (nearest to the HDMI, DP ports) because the middle VRMs have no imprint on the stock pads. Anyways after the nerve-wracking surgery, I installed it back on my Mrs. desktop. The Memory Temps stay cozy at 74c at 60% fan speed. We only started mining three weeks ago when the dip happened/market crash—time to start mining for our next upgrade.

Ottimo, sono originali! Da acquistare!

Forgot to take pic after applying. But image before applying is shared Acer Predator 3050 ti. 4gb vram 120*20. Size is 85% sufficient for this laptop On cpu small black cores stock pad is also used to fill gap. Thermal paste is stock because glide 3.5g thermal paste is not delivered on time i will also use it later. Results Previously idel 67-70. Cod ultra setting cpu/gpu 95-97/70 Room temp 23 By the way 2 diodes burned in motherboard becoz of overheating , used thermal pad while somehow replaced motherboard by technician. now idle 45-50. Cod ultra cpu/gpu never above 75/60 which is insane , just thermal pad is used not even glide paste Pads : These are soft not hard, easily cut They cannot b stretched like rubber like stock pads , these are like soft layer of clay 0.5mm is exectly perfect thickness for my laptop but at cpu need 1mm so i doubled the 0.5mm. I will Also change thermal paste and pads on ssd and some other places . i think then results will b much better. I really liked them. Will update in future update : .5mm pad + glide thermal paste applied idle : 45-50 cpu max 75-80 fan control : custom