Pre Wired Dominator Industries 1 1/4 Inch Road Glide Meathook Ape Hanger Handlebars, 14 Inch Rise, Gloss Black for 2015-2023 Harley Road Glides Heated Grip Option

Order arrived early and easy to in stall. Quality product, comfortable and a great look to your bike.

These handle bars are great. Nice workmanship easy to install. Dominator thought of everything you need, except tools, to do it right and fast. The hardest part was pulling the shrink wrap over the throttle wires. Watch the videos and read through the instructions for all the tricks to make it a smooth install. The whole job took me a little over 3 hours and I was taking my time to do it right the first time.

I bought these handle bars pre-wire cause I was doing the installation myself, but the 2 pull threw cable that was provided with the bars to pull my throttle cable threw the handle bars both broke on me and got my throttle cable stuck in the bars and with that being stuck and no other way to get them pulled to the other end of the bars I had to pull the cable back to the beginning which ripped off the 2 connectors on the cable so now I have to buy a brand new throttle cable wire for my 2020 roadglide that I wasn't planning on spending the money on that when I just spent a few hundred dollars on the Handlebars. It's a real shame with the price of the bars they would put cheap pull threw cable in the bars that back that easy. I'm not happy at all with the way they went cheap on the cables and can't recommend these bars to friend that want to upgrade their bars.

Love them!

Got the bars early was super excited! Opened them up and realized I ordered the wrong set. Instead of shipping them back I decided to make them work. I ordered new risers for my Roadking and set to work. Took 5 hours to run the throttle cable through. I recommend using the heat shrink method as electrical tape dose not flex as well. I also coated the inside with WD40 as well as put red grease on the line. Mind you this was my third attempt at running the throttle through. Took about an hour to do it. I had to leave my cruise control wires exposed because I couldn’t get them through the bars because of length issues. Also learn how to take apart Harley OEM plugs it’s the only way to feed the throttle cable into the bars! Other then that if they were going on a touring besides a RK would have been easy. With the way the chrome mount around the headlight is set up there is not enough room for the brake line. You have to jack the bars all the way forward put the front end together then stretch the bars back slowly. All in all I’m very happy with the bars. Just know with any aftermarket you have to be able to create workarounds for issues.

I was a bit worry after reading some of the reviews and looking up the company BUT product got delivered fast and it was easy to install. No complain here

I left these bars wrapped while installing. The packaging was great. Still Had a nick right on the corner from OEM. The heated grips wiring on stock grip is glued in so I still had to run that. Still need extension for clutch. Front brake is pulling the line a bit to much for my liking. REMEMBER TO PULL THE MAIN FUSE BEFORE INSTALLING.

I was very intimidated in doing handlebars, I’ve only ridden cruisers for a month. I had to reroute the brake and clutch cables and knock down the pin at the base of the handlebars. The review that shows they were offset is 100% accurate. Tap down the pin and you can adjust them to the left a bit. I struggled getting the wires ran, then I tapped a hole in the bottom and the throttle cable pulled through fine. Took about 5 hrs total, and I’ve never worked on a Harley or a cruiser.

Ordered yesterday at 4pm in Ontario Canada received in less then 24 hours that crazy well packaged and great quality!

Fit perfectly on my 22 road glide special