73Pcs(6Sets) Terminal Block Set, 6Pcs 4 Positions 600V 15A Dual Row Screw Terminal Strip Block + 6Pcs Pre-Insulated Terminals Barrier Strip + 60Pcs Insulated Fork Wire Connector by CGele…

Excellent product. nicely packaged, great quality and everything is included to either make + or - buss bars or seperate terminal blocks for + or - Fairly priced too.

These are cool. Just needs a block to this spec to mash down wires for prototyping. These work very well. The screws all function properly and same with the terminal blocks. Tested all of them. Also nice addition of the terminal parallel connectors. Those will come in handy and I already have an idea for that down the road. Perfect size to the specs for my application and project at home. Safety is not a concern for me as the electronics and BMS will handle the extra safety. Happy with my purchase and recommend. I also kinda like the clear plastic holder that nicely and snuggly fits over the terminal block even when the block is full of wires.

The blocks work as designed and was able to use on my model train layout for my landscape. The downfall for my use was the blocks were on the small size to accept the standard fork crimps and the screwdriver did not fit the screws very good. This probably is the Chinese size and not the USA standard size.

The media could not be loaded. I purchased these termination bridge blocks to make life easier when installing a new replacement amplifier for our PA system at my work. The input leads for the original amp had many wires, being fed from multiple zones, all collected and crimped into spade connections, which the new amp would not accept. I needed to connect the new amp with phoenix termination blocks, and to wire it straight would mean cutting the spades off and then trying to jam several wires into each polarity port on the phoenix connector.Forget the nightmare of keeping all the separate wires polarities straight, but the real headache is trying to force several wire leads into a space meant for only one wire. By using this set, I was able to wire the phoenix blocks with standard 22 gauge 3-wire (+/- & ground), and then bare wire to the screw down blocks on the bridge. The spacing on the bridge terminations is good for even thicker gauge wires, and the individual blocks are well separated and protected from each other by non-conductive plastic barriers. It was then a simple matter to connect the existing spade leads from the old amplifier to the corresponding polarities on the terminal bridge blocks. Using this set was a simple and practical solution to my problem.The set was simple to use and I was pleased to see that it included a driver tool as well. Though it wasn't really necessary for my application, as I already had the tools needed on hand, but it was a thoughtful addition.I suspect that most will purchase this set mainly for straight electrical work, but it really saved the day over here in the audio world. I would recommend this product to and for anyone doing similar work, and would purchase it again should the need arise.

quality pieces. Locally way more expensive and could only get one. The whole set was worth it even if I only needed one.

I am pleased with my purchase! The terminal blocks were just what I needed for my project and the price was reasonable.

They work good

Ordered these to use as junctions for a utility trailer rewire. First trailer I have done but I have 7 so I am going to get some practice. I thought these would be better than splices in my wiring harness so I will see how they hold up. First, let me say you get what you pay for and these are just barely adequate. Not so bad that I thought "no way" just ok I'll try them. The terminal screws are not restrained so if you back out too much they will come out and you will be chasing a very small screw. You can mess the screw head up easily when tightening. The plastic body is ok but I would prefer it to be a bit more robust or sturdy. The crimp terminal ends are not the best. So like I said they're ok but I will not buy any more of these or any of them at this price point. Learned my lesson and moving on.