EVIL ENERGY Oil Catch Can, Universal Baffled Catch Can Kit with Breather Filter, 300ml Aluminum Air Oil Separator Tank NBR Fuel Hose Kits for PCV System

Instructions and photos aren’t really great, but it was easy to install. One hose comes from the valve cover and the other goes to the intake manifold. I bought the one with the breather filter and it whistles at idle. Have not checked at higher speeds yet. If the whistling gets annoying I’ll have to remove it and place the plug back in. I did need another 3 feet of hose. As for the product it was a good price and the it is made of good material and craftsmanship. Only time will show if the functionality works as stated, but so far it works fine and no leaks.

I installed this on my 2013 equinox. It collects quite a bit of water and some oil residue in cold temps so I have to dump it frequently. Everything in the kit seems to be well made and I am pleased with the fit and finish. Very good value for the price.

Everything came is it should. However the amount of fittings were odd and why no 90’ elbows. The mounting bracket makes very little sense. The pre drilled holes were use less and not sure why the elbow with no pre drilled holes. I give it a 4 bc the quality was good. But I have a bunch of parts not being used. I ended up not being able to use the open filter bc the jeep pocv valve. I drilled two holes on the elbow and 1 at the end of the flat bar to fit mine in a 2013 JKU. Looks nice. The red is a nice touch and after a month. I’m enjoying it.

Catch can works great. Install is not too challenging. Works just as good as any over priced big name brands. And it looks good. Only thing I had to add was 1/2” hose. The kit comes with 3/8”. Not a deal breaker. Because I’m still saving a lot of money

Pretty solid quality, just not a ton of hose included with it so if you plan on locating your catch can further away from your engine, be prepared to buy more hose. Overall though you can't complain for the price.

Work great

It’s a great kit. If you have an Equinox with the PCV valve issue, you’re gonna want to get this kit and a vented oil fill cap before you blow your rear main seal! Much cheaper and easier to install this than it is to pay for a new rear main seal to be installed. The “blow-by” in the pic freezes up in winter, causing the aforementioned. Pretty simple install that took about 20mins total, start to finish.

3 stars, only for the simple problem that when I first ordered this kit, it wasn't just late. It was also missing literally everything but the catch can itself. No fittings. No hoses. No clamps. No filter. No Bracket. No Steel Wool. NOTHING. However, Amazon sent a full refund and replacement. I then received the whole kit as advertised. And the Quality is great. Good billet can. And everything else is solid. Keeps my minibike breathing !

I chose to try this oil catch can even though it is half or a third of the price of brands from other suppliers and was really surprised at the high quality of the parts. Even the hose supplied was a proper fuel hose type. Installation was super easy and everything fit well. I used a bit of silicone grease on the threads of the canister to help stop the binding. The kit did not come with teflon tape for the bars fittings but probably not needed as there are supplied o-rings for the seal at the fittings anyway. I’d recommend the kit

Didn't work on my jeep wrangler and i got engine light

Excellent kit, looks and functions perfectly and was easy to install

Very quick to arrive with all the described items. Looks of excellent quality. Haven't installed yet but this is exactly what I was looking for.

Inlet and outlet are a little small, so the flow is slightly restrictive, however the build quality is surprisingly great for the price! Only complaint I have is the port sizes and also the breather filter keeps coming off, make sure you tighten it more then you think you'd need to.