SW 80% VLT Nano Ceramic Car Front Window Film, 99% Anti UV Heat Insulation Sun Blocking Solar Window Tint, Transparent Blue, 20Inch X 10Feet

Worked great. Easy to install. Definitely helped with heat reduction.

I purchased this window tent with high hopes of stopping the heat waves from coming through the window on my arm. I did not purchase it for privacy, and it claims it would block the heat. It does not.

Brand "SW" 80% ceramic tint 20"x10' . Very light and almost not able to see window is tinted. My stock windows are very slightly baby blue colored so this addition isnt easy to see. I did only the drivers side window. Installation was ok, but this was my second attempt, and its not perfect. If you want perfect go see the pro installer. This 2nd attempt is really nice however. Use lots of water. The old tint removed easily by just peeling it away from the glass, but the tint was in place only about 2 months. Follow the instructions, but a lot is going on when installing this stuff, so for a non-pro they should not expect pro results. Good temp reduction and i'll know soon about uv reduction (i have uv cards ready for test).

Tough to use on curved glass, like any auto glass. Not sure its really ceramic tint. No material from company. On a positive note it is optically clear. Time will tell the take for this stuff. Using it to get some heat rejection on factory privacy glass since it has zero heat rejection.

I did a quick test of this 80% VLT (46% TSER claimed) film next to a piece of 35% VLT (43% TSER claimed) by temporarily adhering both to my windshield and parking in sun. I measured the temperature of my black dashboard after 15 mins and 2 hours in the sun.This 80% film reduced the dashboard temperature by approximately 10 degrees. The 35% film reduced it by approximately 20 degrees. Supposedly they have about the same TSER value, so I would have expected both films to have similar results. However, this film only had half the heat reduction of the darker film.Keep in mind, the area without any film was at 155 degrees after two hours. The 80% and 35% were at 146 and 135 respectively. So, this will help a little, but it's not going to make your vehicle feel cool if you have to park in the sun.I decided to use this anyway because it does provide some benefit, just not as much as I hoped. It would be interesting to see how this compares to something like 3M crystalline if I could find a sample to test with.

This tint does exactly what I want it to, and that is: it blocks a ton of heat without looking aftermarket.On old vehicles with big windows, I strongly dislike the look of heavily tinted glass, but the big windows tend to let so much heat in, you bake in the sun.This 80% tint blocks the heat from the sun while looking factory. The jury was out on wether or not it worked until I got stuck in traffic in the desert. The sun was shining right on my face through the window and barely felt warm, but as soon as I rolled the window down I felt the full force of what was being blocked by the tint. It was at least a 70% reduction in heat. For that I will call it a total success. 1 10ft roll is technically enough to do one truck (3 windows)

Product caked nicely packaged. High quality film, very easy to install. Was able to complete the install without bubbles and gave me the performance I wanted.

Does not look like what they have on the ad, even with PPF installation experience I struggled with this product, having all the tools and know how. You know what they say about some things, you get what you pay for, I shouldn’t have expected a 10 when shopping on Broadway!