BANVIE Car Keyless Entry System, Car Central Power Door Lock with 4 Button Remote Control Transmitter, Electrical Anti-Theft installations for Vehicles

Haven't written a review in a while but this thing is great and makes me happy every time I use it. I was hesitant because of the low price but this keyless entry system is worth every penny. The remotes are nice quality, not big and bulky, instructions are not very helpful but google is. After I figured out the proper wiring for my car on a Corvette forum, none of the diagrams supplied worked for my application but once I figured it out installation was simple and now I have keyless entry. My car had existing actuators and switches on the doors but I had to use a key to open the doors from the outside now I push a button like a modern car. I am thrilled with this and highly recommend for a C4 Corvette for sure and anyone looking for a inexpensive system like this. There are a lot of other features that I didn't care to hook up yet like windows and flashing lights but the locks work great. Next I'm doing the rear hatch but I need to access the wires. Great system! Update..have installed the trunk release and like some other reviews you have to hold the button for a full 3 seconds for the hatch to pop which is annoying but still better than opening the door and reaching in to push the hatch release button like I previously had to.

I like how it was only $15 bucks and easy to install. My lights blink and the car locks and unlocks just like a car alarm. Even comes with a blue LED blinking light for when the car is locked, to give a sense of a car alarm. I got the trunk open function wired up pretty easily but installing the actuator and getting it to work properly took a lot of troubleshooting. Just google your car’s wiring diagram and find the right colors under your dash. Connect the right color wires from your car to the Benvie’s wires, and in less than 30 mins I had a working system. You will need some extra wire of your own, the wires in this kit are way too short. My car is a 93 Del Sol and I hate using the key for the trunk and doors all the time. Now I have a button for my trunk and my driver side door. Eventually I’ll do the passenger side door too, but not a priority. The hard part is removing panels and tucking the wires. So in total, including the wiring, dash and side panel removal, troubleshooting, mounting lock/unlock actuators that cost like 5 bucks each, I probably spent like 4 hours. Lots of troubleshooting to get those actuators working properly every time you push the button, but the Benvie itself is easy to install and understand. Might be more difficult installing on a car that already comes with automatic door locks, but the actuators were easy to wire up following the wire diagram. I recommended it to a friend who also hates using the key to open the door, he couldn’t believe how much I paid!

It works really well, my only 2 complaints are: the instructions are not detailed at all. So if you want to change the trunk trigger from power to ground, it tells you that its an option but doesnt detail how to…. You just have to figure it out… secondly i wish you could to that for the horn chirp. My truck is a negative trigger, so i used to trunk open option as a horn button, So now it has a 3 second horn if i need to find it lol

I’ve been twisting wrenches for forty plus years and I am always looking for things that would make my life easier and and add value to vehicles I repair. I bought this not expecting very much but to me surprise it was a very nice buy. It was fairly easy to install ( just a little knowledge of how the door locks work). It was the right thickness to be able to easily place under the dash board. The wires were just the right length. The instructions that come with it seem to be vague at first but upon more inspection they are exactly spot-on. The instruction sheet specified the wiring for negative accurator , positive accurator or positive- negative accurators. Once you figure out what kind you have it’s very easy to wire. Simply put it is a very inexpensive way to add keyless entry to autos that have had them factory installed or adding keyless entry to a vehicle that has lost the key fob. It doesn’t have an alarm it just meant for automatic door locks. I was very pleasantly surprised with the quality of the device and the clicker is absolutely amazing looking and the quality of it is amazing as well.

Easy to install and works great

These work perfect. The installation was not bad at all if you are pretty good with DIY and have any experience working in a car. It took me 30 minutes. The diagram shows wiring to the battery but I couldn't find a good spot to get through the firewall so I ended up going with a fuse tap going from the fuse for my radio which is a constant 12V. Very easy and the rest of the wiring was exactly like the diagram. I did this on a 2002 Toyota RAV4 and both yellow wires and the black wire were grounded. Then red wire to the fuse tap for 12V. And then find the specific wires for your unlock/lock and tap into those with the white wires. The remotes are really nice too and look fancy. I did not hook up tje brown wires to the turn signal lights or the trunk pop wire as I have a hatchback. 10/10 would recommend

Wiring directions were ok. If you have any experience. I was trying to get power locks with a remote. The unit does lock and unlock, but the led indicator doesn’t work and the outside lights don’t flash! I have been an electrician for over 50 years. Double checked all wires. No output from “brain”. Buying something better since my 30 day window is up 🤬🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸

This is probably one of the best q.o.l. upgrades I've done for my old car. This keyless entry kit is well made and inexpensive. The key fobs are really nice too. I was able to install this on my own in about an hour with some wire tee-taps and a car alarm wiring diagram I got on the internet. I'm very happy with this purchase.

Very convenient

I only use the locking feature but it works flawlessly

I like the remotes, and it does what it suppose to do. I do not like the fact that you need to press the trunk button for 3 seconds to open it, should open as soon as you press the trunk button on the fob, this is the reason why I gave it 3 stars

Would not work by the printed instructions for my 97 c type locks. I had read another fellows review where he said connect the 2 yellow to ground and NOT to power! He was right! Connected 2 yellows to ground and all works! Be aware, I needed relays to lock the doors properly. Easy enough!

works well, good product