Damp Proof Epoxy Resin Water Based Paint for Garages, Walls, Basements and Tanks - 1L (Green)

Absolutely Brilliant stuff! I’m building a toilet/shower in my camper van and had done the tanking, found out that the paint I was going to use ( was recommended to me) would affect the tanking (waterproofing of the panels). Researching on google bought me to this product, as it’s water based and not solvent based it so safe for the tanking. I phoned the company owner and he was extremely helpful, it’s used on swimming pools, food factories and breweries and can be power washed. I bought two tins of the 1ltr size for doing two coats. Really easy to use by mixing the two parts together and stirring well then adding water gradually and stirring well. Coverage was very surprising, a can goes a long way! Enough to partially second coat my room. I highly recommend this product if you’re looking to do something similar. Attached photo was after the first coat and has almost covered the bright blue tanking paint

This stuff is superb. Bought it for a damp garage wall that was getting mouldy. Cleaned off the mould and applied this all over the brickwork. No more damp coming through the bricks, smell of damp has gone and it looks nice and clean too. Really impressed. Would buy again if I needed to tackle damp. It was easy to brush on with a normal brush and coverage estimate was pretty accurate even on the back of bricks. The trick is mixing with plenty of water otherwise it thickens quite quickly. It cured properly after about 5 days but weather had turned cold, so that slowed it down a bit.

Easy to use covered more than I thought

The colour is spot on and a lovely shade of grey and goes well in the kitchen. I put it down to protect the floor until we decided what floor covering to have. Now we love it that much we are just going to get a rug. The kitchen just feels more hygienic now and will be easier to keep clean. It took longer than 8 hours to be tack free. We could walk on it at 10 hours, but I did make sure it was well covered and I didn't waste any. The tin is 1 ltr and it spread further than I expected. I put it on at night so it had very little impact on us as we were a sleep for most of the drying period. Dead easy to mix and the instructions are really easy to follow.

Easy to use good product

Needed this to provide a good lining on the internal surfaces of my severely rusted loft cold water tank (tested in 1951, prior to installation). I removed 1.7Kg of crusted rust, the tank base had lost all its galvanised coating; after clean up, I had to leave some hard crusted lumps in situ, prior to applying 2 coats of rust converter. I then put an electric fan heater in loft to warm up the tank (epoxy not to be applied below 10 degrees C), after applying !st coat, I used a hair dryer to speed up drying before 2nd coat (touch dry after 75 mins; pot life is 1-2 hrs). After I let 2nd coat cure for 6 days, there was evidence of a couple of cracks in coating, so I applied an excellent sealant, which can even be applied under water. I recommisioned tank on the 8th day, all okay.

You could eat your dinner of the floor of the potable water tank on my narrow boat, it's never looked as good as this in the life of the boat. Great product, very fast delivery

This was used to waterproof concrete block walls