CableCreation Active USB 3.0 Extension Cable 16.4 FT, USB 3.0 Extender Male to Female Cord with Signal Booster Compatible with Oculus Quest 2, Rift Sensor, Steam VR, Gaming PC, Printer, 5 Meters

I needed a cable for tethered shooting in my studio and came across this. This looks identical to the Tether Tools cable extension (except the colour) and it costs 1/5th what the Tether Tools one does. So i took a chance on it and thrilled to report that it works beautifully with all my Nikon Camera's.... tested with the Z6II, D750 and D850. The build quality looks really sturdy and good too.

Good product

The product works perfectly for my joystick, First I received a Tampered glass,I was disappointed after seeing it, then I replaced it by complaining. After 2 days I got the cable delivered in exchange with Tampered glass, It works perfectly fine

Nice

Works as intended. I am running it across my room in a daisy chain. Type C Hub - Portronics 4 Port 3.0 Hub - Active USB Cable - Portronics 4 Port 3.0 Hub. All of the ports are populated and I am not experiencing any connectivity issues. If you want a long extender this is highly recommended.

Highly reliable product. Works effectively. Highly recommend for the USB appliances between 5 to 10 mtrs

Cannot expect the speed like normal usb 3 due to the length. But a good product. Good wire quality, does not drop the connectivity.

I am not in a position to calculate the data transfer speeds, so i cannot comment on that advantage. I will have to take the manufacturer's word for it. I would like to highlight the fact that it is compatible with USB 3 only, so buy it only if you are connecting to USB 3 terminals at both end.

I bought this to extend the cable on an Oculus Rift sensor with the vague sense of dread that comes with knowing it seems to be a bit of a lottery as to whether extension cables are compatible with them. I'd done some research beforehand and signs seemed to be positive so I gave it a go and to my relief it works just fine. It's a thick but still reasonably flexible cable with certainly room for a decent level of shielding inside but I'm not going to hack it in half to check so I'm just going to have to go on performance which has been pretty flawless for what I've needed it to do with no drop-outs of connection and no weird tracking quirks which, to be honest, is enough to convince me this is more than good enough quality for any other kind of use I'd need a USB extension cable for as I generally found the Oculus delighted in dropping connection with the sensor with even the mildest excuse. It also manages to be genuinely hideous to behold with a styling choice that resembles something from an early 90s mini hi-fi system so that's a plus.

Sadece usb2 eski flashi tanidi, ama usb 3 flash ve webkam ve başkalarile çalışmadi,iade ettim

I purchased this along with 3 other DisplayPort and USB extenders (and a DisplayPort coupler) to try to extend the display for my Valve Index. My tests were NOT exhaustive, but all 4 of the options worked. In addition to reviewing this product, I'm also detailing the other options I tested, including price. For anyone else looking to extend their VR system, I hope this helps. In all cases there was no discernable loss of visual or audio fidelity or dropping of frames. Cable length doesn't introduce lag/latency, so no worries there. But ONLY the active DP connector successfully transmitted the signal to the headset successfully / without snow. THIS PRODUCT: USB (5m) ($15.99) - CableCreation Active USB Extension Cable (Long 16.4 FT). Works great, as expected. OTHER PRODUCTS: DisplayPort (10m) ($98.99) - ATZEBE Fiber Displayport Cable 30ft, Fiber Optic Displayport 1.4. This cable diameter is remarkably small, but it performed equally to the 5m LINKUP cable with a wider gauge. The connectors / cable heads produced heat as soon as the cable began transmitting data. This may be by design for thermal management; but if it's not by design this could be problematic. Other than that the cable seems to work perfectly. DisplayPort (5m) ($39.96) - [LINKUP] DisplayPort DP8K DP1.4 Cable (VESA Certified). This cable is kinda thick and very well built. It did the job. USB (10m) ($35.99) - Cable Matters Active USB Extension Cable Male to Female. This worked to extend the VR range even without being plugged in. Note that a power adaptor is NOT included, which legit sucks. But thankfully the Index worked fine without the power boost. DP connector (0m) ($19.99) - Cable Matters DisplayPort Repeater (DisplayPort Signal Booster, DisplayPort Amplifier). This successfully extended the signal an extra 10m for my Valve Index headset. DP connector (0m) ($11.99) - Cable Matters 2-Pack DisplayPort to DisplayPort Coupler. This DID NOT WORK to extend the length of my Index cable. PRODUCT LINKS: ATZEBE DP cable - https://smile.amazon.com/gp/product/B07QQQFWGT/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 LINKUP DP cable - https://smile.amazon.com/gp/product/B07DX6MF45/ref=ppx_yo_dt_b_asin_title_o01_s02?ie=UTF8&psc=1 Cable Matters DisplayPort repeater - https://smile.amazon.com/gp/product/B07D949F59/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 (not linking to the passive DP connector since it didn't work) CableCreation USB Extension - https://smile.amazon.com/gp/product/B0179MXKU8/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1 Cable Matters USB Extension - https://smile.amazon.com/gp/product/B00DMFFL2W/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

J'ai acheté cette rallonge avec un câble USB A vers USB C de chez Anker pour l'utiliser avec un Oculus Quest, et tout va bien, elle ne m'a jamais lâché et à toujours fonctionné à la perfection. Je l'utilise maintenant avec un Quest 2 et je n'ai toujours pas de soucis malgré le fait que le Quest 2 demande plus de bande passante. J'apprécie aussi le fait que la prise tienne bien le câble, mais pas non plus trop. Il m'est arrivé de marcher sur la rallonge et de faire un mouvement en même temps, et cela débranche la prise plutôt que d'arracher le connecteur du câble dans le casque, ce qui est une bonne chose.

Cablecreation Extender arrived in the mail today. I plugged the Quest cable that comes with the Quest into it via a UGreen USBA to C adapter and then plugged the Cablecreation Extension cable into a USB port on my PC. Held my breath, turned the Quest on and immediately started playing a Steam game via Oculus Link. It works perfectly and now I have 8 metres of cable distance. The CableCreation cable is quite thick and solid - I can't believe they are selling this for $ 12 on sale - worth so much more but don't tell them !!! If you want to use Oculus Link and need some cable distance to avoid being tethered too close to your PC and keep hitting your computer desk with the controlllers like I was then do yourself a favour and snap up one of these extenders and turn your Quest into a Rift without the hassle of installing base stations on your wall. Now you've got the best of both worlds. And who would buy a Rift S now ?