Kegerator Super Tower Cooler with Rocker Switch (Upgraded for MAXIMUM cooling)

Did a lot of reading up on this & am very glad to have gotten. Installed in a pool deck kegerator in Florida, the area is covered but still hot & the tower isn't insulated well enough to keep beer cold in that part of the lines. Set up didn't take too long, hardest part was running the plug as I didn't want it dropping out the door. The Co2 port was too small to run hose & plug together so I removed the cover plate to the Co2 port, removed the Co2 hose, drilled a hole at the edge of the port & ran the power cord through & replaced the Co2 hose, perfect fit & the cover plate covered the drill hole.Removed the tower head completely, laid blower hose against tower & marked hose to 2" from top of tower, inserted blower hose from bottom of tower then fed hose into box, added insulation around slight gap to Co2 portal. Reassembled tower, made blower connections & within an hour there was condensation on tap handle & very top of tower, pulled hose down about an inch. Lost some temperature during the install but about 3 hours later box & beer were back to temp. Overnight the entire tower is dripping with condensation, Power cord comes with a rocker switch which makes it easy to turn on/off, got the one with rocker switch on blower unit which I really didn't need as the cord/plug is easily accessible. Will now turn off blower when not needed & back on a few hours before happy hour!Filled a glass 12 hours later & it tempted out at 39.2 with an internal box temp of 38.9, perfect head of foam where before the foam was more than double.

I have this cooling tower in a Kegco kegerator and have been very pleased. It was easy to install, easy to operate and does not take up much space. It is audible, but I do not find it overly noisy and often times forget it's running. It does create a very noticeable difference in the temperature of the beer. If you like cold beer, this is a must. I am using it every time. It does take about 30 min to get to the ideal temperature, so you have to plan ahead to turn it on. Overall a great product though.

This product does just as described and better. If you have a kegerator and beer flows from the 32-38 degree fridge and then through a draft tower at room temp; you will get a foamy pour. People at your get together will secretly wonder what else they could be doing, and then you'll be by yourself with a half glass of foam. This fan is so much better quality than the PC fan other guys are using and selling; and so much cold air goes up the draft tower that I began to get a little condensation on the tower itself. I had it installed in under 5 minutes. Since my CO2 tank is in the fridge, I cut a small slit in the rubber plug to run the tank outside for the power cord, ran the hose up the tower and powered it up. Every pour was perfect, and I am a hero. It even fits with a whole 1/2 barrel. This item is a little pricey, but the amount you save on foam down the drain - and the embarrassment of your fellow beer enthusiasts pays for itself. MP

I am new to the kegerator scene and can't believe I didn't get one sooner. Researched this one and boy am I happy with this - this is not your computer PC fan rigged in a box, this is very high quality and good design. I like that this one has an on/off switch both on cord and box because once inside it's pretty tucked back there (not that I'm sure why you would ever put it off). It cools the tower amazingly well, the tower is super cold to the touch. I don't have a lot of noise, it is a gentle hum once the door is closed. I am happy that my kegerator comes with a cutout w/ rubber stopper to accommodate an external CO2 hose because I just used that hole to feed in the power cord. Overall, A+ get this at same time you order your kegerator.

Works flawlessly.

This is my second tower cooler. This one seems much more robust and keeps the tower much colder than cheaper versions of this. Works as advertised. Foam is no longer a problem, and no more tossing the first few ounces of a pour away. Also the external rocker switch is nice as I can turn cooler off between weekends easily.

Keeps my double tap tower cold enough to control the foam. As far as noise...unless you are drinking alone in the silence you won't hear it.

When it works, it does a wonderful job. This eliminated the excessive foaming caused by warm beer lines and tap. It worked fine for about 2 weeks, then started making noise when it started up. It's progressively gotten worse, I don't think it'll last much longer, which is a shame considering the price and what appears to be very cheap materials. Good concept, poor execution.

Product does work as described and does keep the tower cool and is really easy to install. It did not resolve my beer foam issues as I think my issue is due to the length of my keg lines so really I am in the same position I was in before I bought this unit. One major concern for me was the shipping to Canada as I paid for expedited shipping and it took twice as long as the site said it would.

Have used this tower cooler on my kegerator many times and it works perfect. A must to keep the lines cool in the tower and less beer waste.

It was a bit pricey for what you're getting, but it looks great, worked when I plugged it in, came quickly, and should meet the need.

great product I like anything that keep beer cold .