MT5000 Brume 3 VPN Security Gateway, 2.5G Multi-WAN, OpenWrt | 1100 Mbps WireGuard, three 2.5G Multi-WAN ports, VPN obfuscation, DPI blocking, OpenWrt USB 3.0

I live in a rural area. Went from 25mb copper to 150mb fibre. Download and upload was faster but, overall lag still there. Loaded ping not a lot better on fibre Vodaphone Power Hub. Plugged in Brume 3, tried a few options, tried SQM and loaded ping now less than idle ping with only a small trim from overall upload and download speed. Lag is noticeably better. Wireguard VPN into Proton works great too, VPN download speeds excellent. I am a complete novice with this stuff, it was easy for me to do. Is it worth £110 to fix latency? For me, yes. Great device.

This device is a "you have to have it", absolutely amazing transfer capabilities, performance and settings for such a small device. Only after purchasing it did realize how useful and necessary it is in my network. Without a cooling fan, it should be that way so as not to suck in dust, etc. Very low power consumption, so as a security gate it will work great when traveling. The VPN speed (in the attached picture) explains everything. I really recommend it.

Wow. So I had an old micro pc hanging about and I built a VPN server (Linux). Then I bought the brume and WireGuard’ed it to VPN to my home pc. It is brilliant! Everything on the remote network while I am away goes through my local network, avoiding any issues with commercial VPNs. I am super impressed. The brume just worked. Seriously. Setup once, and haven’t had to touch it since. Just brilliant.

Needed a new router to replace my trusted Ubiquiti ER-X after ISP upgraded to 2.5Gb. Decided to go for the GL-MT5000 and very happy with the decision. Easy to set-up and fine tune for home use.

Best device I got. Just changed my whole networking at home with different VPN setups and my personal wireguard and tailscale. Seems to handle speeds higher than other devices. It's tiny so can even take it and use it for tether. Atm have it setup infront my mesh so all the house traffic goes through the different VPN routines I've got. Can policy route by IP / Mac address... Many many options.

Excellent device to use as a home router with vpn capabilities. I actually don't use the vpn, I use it for routing and monitoring my connection. It has graphs showing use by protocol/application (e.g, it can identify apps such as Instagram, ring, Google etc and you can see download totals). Also has QoS and even with hardware acceleration disabled hardly bothers the cpu. Note to use data statistics and the dpi engine hardware acceleration has to be disabled. This hasn't caused me any issues though. Should you be a power user you also have access to the full openwrt LuCI interface for more detailed control. Highly recommended.

I have a few gl.Omer devices, I really like them! I’ve set a few of the mangos up for friends and family as VPN gateways and THIS ONE IS An absolute monster in a little plastic box! I’ve got mulvad (wireguard) encrypting my entire network, both the main lan and the iot/guest networks plus Tailscale advertising my entire subnet.. for anyone who knows, I’ve retired a netgate 1100 running pfsense+ for this, so simple to set up! And if I want to add some complexity to the mix, you get to install LuCI so the entire openwrtOS is available to you to create as many firewalls as you like! BUT in its native form, if you are wanting this to run as a vpn AND a Tailscale exit node, the exit is fine (you need to ssh in to set it as an exit node) but the exit traffic is handled WAN side so it never sees the VPN.. I’m not quite sure right now if LuCI allows us to wire it up differently..

This is ideal for anyone that wants that extra layer of security for remote working. The instructions are clear and easy to follow. It's not quite a beginners guide, but it's simple enough to get you up and running in no time. It doesn't seem to affect network performance in any negative way and once set up you really don't even notice the difference. The DPI protection is great, giving an extra level of security. I like the fact that it has built in openwrt, but it seems to be a fork of the original open source software for some reason. I'm not sure why, but it should be advertised as such. Speeds are good, connection is nice and stable, its small and fairly well priced. If you are looking for a wired VPN gateway this will probably be fine, the only features lacking are wifi or cellular, but that's not what this is and it would be much more expensive. Small, portable, easy to setup, easy to keep maintained with a well thought out GUI. They are doing something right here, 4 stars.

I do a lot of traveling for work and therefore connect to a lot of public networks. I tried using a commercial VPN solution but ran into some issues such as a company portal hosted on AWS refusing to connect because the specific VPN-provided IP address was blacklisted. I decided to look into a more DIY solution that I could work in to my existing network. Since I already have a router and Wi-Fi mesh network, the Brume 3 gave me a quick and inexpensive way to add VPN. The Brume 3 is compact (roughly 3" square and 1" high) and easily fit on my equipment shelf. While I am using it for VPN, it is a full router and can serve as your network gateway if that is something you are looking for. Setup was relatively easy. Initial setup requires a direct Ethernet connection to a LAN port to set the admin password, WAN details, etc. but once that is complete you can set it up to allow WAN connections (I'd only recommend that if it is behind a firewall). The VPN setup was straightforward, though I did have to do some Internet searches to make sure I was configuring it to meet my needs. It supports both WireGuard and OpenVPN servers and the configuration is not overly complex. I recently took a trip and was able to give it a thorough test. Connection was simple - I was using my GL.iNet Slate 7 travel router so I simply turned on the VPN switch after connecting to the hotel network. Speed tests showed that I wasn't losing much to the tunnel headroom, though I will note that it can vary between tests depending on network conditions. My devices were seen as coming from my home network, so I had no "it looks like you're traveling" pages pop up from my streaming apps. Plex even attempted to direct stream since it saw the server as being on the same network (though that quickly overwhelmed the hotel Internet). WhatIsMyIP confirmed that traffic appeared to originate from my home router's IP address. If you are looking for a relatively easy VPN solution (or even a front-line Internet Security Appliance), I would recommend the Brume 3. The price is good and it works well for home use.

Rápido y versátil, cumple las características de un buen router

I picked up the Brume 3 to replace my Netgear DDWRT R9000. Setup was straightforward right out of the box. Since I don’t need or use I ran it purely wired with some TP Link Deco AP’s — and I honestly can’t tell any real-world difference in performance compared to the bigger/more expensive “big brother” models like Flint 2 or even Flint 3. The DPI feature is a nice touch unfortunately you can do anything with it, like policy-based routing etc. Nevertheless nice to look at. The Router delivers excellent speeds (up to that advertised 1100 Mbps on VPN), handles multi-WAN, OpenWrt customization, and DPI/security features flawlessly. Super compact, fanless, and reliable — exactly what I needed for a secure, high-performance wired setup without the wireless overhead. If you’re looking for a powerful VPN/security gateway that just works (especially if you don’t need built-in Wi-Fi), this is an outstanding choice. Highly recommend!

This thing is great! For people who want more granular control over their internet / home networks, this thing works a treat. Very fast processor for hosting a VPN client (see attached photo speed with VPN running as a client on my router powering my home network) - with options to set up multiple vpn configs that you can turn on or off with proverbial flip of a switch. You can configure different VPN servers, or even different VPN providers for different devices if you needed, e.g. Proton for your home desktop, Windscribe for your work devices, with individual configured VPN servers for your IOT devices etc. You can analyze traffic at a very granular level - I can see for instance what my phone (over wifi) is querying through the router or what your smart device is trying to do (phoning home etc.) - then you can block those requests quite easily. Adguard is built in to the router which works well, and you can see real-time what requests it's blocking automatically. I was thinking of getting a Flint 3- but the VPN speeds were not as good as the Flint 2, while the Flint 2 wasn't a tri-band router. As I already had a budget tri-band router (that was awful with a VPN), buying this device (Brume 3) ended up saving me money - less than 1/2 of one with a router built-in which I already had. The only thing I'll note is the obfuscation feature being 'built-in' isn't actually handled by the router itself, you need a subscription to a specific wireguard VPN that uses "AmneziaWG" - and those are few and far between, more over it seems like it's a very new altered wireguard protocol that has some growing to do. That said it works well for me as is; and I think there are some providers (you can Google it) with obfuscation built into their config (you have to make sure you can download the obfuscation configuration for the router, not just have it be available on their app/desktop client). Something to be aware of anyways. All in all, this is exactly what I wanted! Great for tinkerers or those serious about their home privacy.

GL inet gateway is one of the best I have ever had! Very recommended