Car Reverse Backup Parking Sensor Radar System, Buzzer beeps, Detection Distance:30~150CM, Waterproof Sensors (22mm Diameter 2.3M Cable) 4 Packs X60D (Black)

Very easy to install and working great. No more backup bumping. I hope it will last long.

Installed on a 2005 Ford Escape with standard gray plastic bumpers. First I painted the sensors; Behr, Chalk color, Classic Noir, Matte and Rust Oleum 2X Ultraclear, Matte, both from Home Depot. Virtually an exact match to the bumper. I researched photos online to get the exact OEM placement. Wired the power wire to the car's red and black reverse light wire in the wire bundle in the jack storage compartment and grounded it to the jack. Make sure you mark each sensor wire A, B,C, D and plug them in the correct way on the control box as indicated in the instructions. They are functioning very well. My criticism is that they start beeping at about 3 1/2 feet and the steady tone comes on at about 1 foot. I would prefer they come on a little further out and go to steady tone at about 6 inches for tight parking spots. I'm going to put a set on the front now. Overall fantastic value and great performance!

These are fairly easy to install, I actually replaced a different system so did not have to drill new holes. They are load but its nice to be able to turn off the speaker if needed (i.e. towing/backing a trailer/bicycle rack, etc...). FYI, installed on a 2010 Ford Escape.

I have been buying/using these type backup sensors for years now. I love them. I put them on my daughters car as well as my own. Nary an issue, they ALWAYS work and work correctly. This time, I got the grey ones to go with my grey Escape. Initially, the sensor colors looked like they were s lighter shade, but after installation, they blended in perfectly.They work perfectly as well. I only used 3, 1 on each end and 1 in the middle. The speaker/buzzer is in the rear and is plenty loud enough to hear above normal radio listening levels when backing up a car. Final solid tone means you are approximately 2.5 feet from the object being detected. I would prefer something closer, like 12"-18", but, what are ya gonna do? I still recommend this for the price. VERY easy installation, ESPECIALLY if you already have an aftermarket backup camera installed and working.Would buy again. Glad I got the color matching this time over the black I usually get. Much classier. Perfect color match for my 2012 Ford Escape Sterling Grey!

I'm not having much luck. I wired the unit in as instructed but it's not working. Been procrastinating at switching the neg and postive wires around to see if that'll make the unit work. I believe I got the wires hooked up right the first time, but there's always a chance I made a mistake. I'll update in a while after I try a couple of more attemps.Update 12/31/25: I really wanted this parking sensor system to work. I know what I'm doing when it comes to vehicle wiring. Several months ago I installed a backup cam I purchased off Amazon. Works like a charm. I've ordered and installed 3 separate reverse sensor systems now, and none of them work. I mean hooking up the wires and installing the sensors isn't rocket science. I'm done ordering, installing, and being disappointed. I have $60.00 invested in these kits now. $60.00 isn't much; probably waste that much at convenience stores buying junk food. Going to throw all the 3 junk systems in the trash, and chalk it up to cheap Chinese junk!

El producto se instaló duró dos semana y ahora suena cuando quiereEl la noche no suena y en el día algunas veces

I was a little hesitant to order these because of the low price. I am so glad I did. I couldn’t be happier with this product. We bought a late model Honda from CarMax. We thought it had this parking aid. My wife was so disappointed because her old car had it and she misses that feature. I contacted Honda and they wanted over $1,000 to install this. I went online to review some installation videos. When I went to amazon to purchase a kit I was so surprised to find this product for sale by this supplier for such a reasonable price it works perfectly. I had no problems installing it. I highly recommend this product to anyone who is handy and needs this feature.

Installed this kit on my 2023 Jeep Gladiator and it was amazingly simple to install. After removing the bumper (only 6 easy bolts) and turning it over, it was factory marked where the sensors go. Drilled and deburred the holes and the sensors popped right in. Wired the power wire to the reverse wire inside the driver's side tail light and there was enough room in the fender to tuck in the controller. Wired the buzzer under the back seat and Viola. Works like factory.