GLISTON Auto Dent Puller Kit - Adjustable Golden Dent Remover Tools Paintless Dent Repair Kit Dent Lifter Puller for Car Large & Small Ding Hail Dent Removal

Due to a blemish on my new refrigerator, Lowes gave me 50% off just to keep it. I happily accepted because they refunded me nearly $1,500. I decided to try this $37 kit to see if I could make the dent less visible. The kit is surprisingly high quality for the price. The key is patience. The tab will come off after a certain amount of pull pressure is applied. This allows you to check your progress. I glued the tab on 4 times to get the dent out. The next part was much more time consuming. There was a slight bubble left from pulling the dent out. The kit comes with a rubber mallet and tools to tap the metal flat. This took me over an hour to get the metal perfectly flat as stainless steel is very unforgiving with light reflection. I was pretty happy with the result as it greatly reduced the blemish by at least 80%. Just enough not to look terrible! Great product if you are careful and have patience!

Was able to mostly fix a small door ding I got in my passenger door with this. The glue definitely doesn’t stick very well, but that’s potentially due to me living in a pretty hot and humid climate. I pressed an ice pack on the dent for about a minute and then glued the plastic piece onto it. I then pressed the ice pack back over the plastic piece and surrounding area for another minute or two to make sure the glue was good and solid before pulling it out. The majority of the dent is gone, with an ever so slight dent still there. I might try this again once the weather cools off a bit. Definitely worth a shot at least. Maybe not quite worth $40, but still cheaper than a shop.

First off, I’m no professional. I decided to do the work myself as I was quoted an outrageous amount for roughly 30 dents. Heck, I don’t even see 30, so out of the 9 highly visual ones. I decided I would do the work. Temp-do not do this directly in the sun (90*+), the glue will not cure/harden. I was able to work in the garage (while 97* outside) or under trees in the morning. After using the clear glue sticks for awhile, I decided to use the black sticks on both the blue and black pads. While the black glue works better with the black pads, I occasionally used it on the blue pads to do the process faster. Some dents only took one pull of the yellow tool, while others took 4-5 pulls. This takes patience, my wife helped with spraying alcohol on the glue and scraping after I pulled the yellow tool. Which also helped a bunch. I took a moment to watch a few videos on YouTube prior to doing the work.

Instructions are generic and not for a specific item. They don’t tell you what the difference is between the black sticks and the yellow ones so I started with the black ones because they seemed like a stronger material. It was definitely strong. Spraying alcohol on it does nothing and the scraper is too flimsy to make a difference. Reheating the material just makes it smear. I assume it’s oil or petroleum based because once it finally came off it took the clear coat with it. The yellow stick was actually stronger and hardened to the point where I couldn’t get the attachment head off of the truck. That material had to be removed with a heat gun as well and it smeared substantially worse. Maybe it’s not meant for 14 year old clear coat but I would save your money and get suction cups or a regular glue gun. Now I have the same dents and missing paint.

I got to use this kit for the first time today to remove a good sized dent in the corner of a fender. I was impressed with how strong the pulling tabs and glue are, the small body hammer and tapping tools worked nicely also, but was disappointed to find that not all components of the bridge are up to the task. The reason for three stars is because the bottom handle of the bridge, which pivots and does the actual pulling motion, is machined from very soft pure aluminum and wound up bending severely at it's weakest point (where the pulling rod goes through the channel milled through the middle of the handle) on the very first pull. While the rest of the bridge is exceptionally sturdy, the bottom handle should be manufactured of a stronger metal, I suggest some grade of steel - bar, mild carbon, stainless, chrome vanadium... doesn't need to be super hard, just stronger than the aluminum which the current design uses. I do not intend on returning this kit, or even asking for another bridge (which will only fail again in the same manner). Instead I'll make my own replacement handle to install in place of the original failed component. Hopefully the manufacturer will be notified about this flaw and select a different pivot handle material to use in a future design update.

Used this product to fix my dented Yeti rambler! My one gallon stainless steel jug fell out of my car and ended up with a sizable dent so I decided to give this kit a try. It was very easy to use out of the box although the instructions weren’t too helpful, the process was fairly trivial: insert glue stick into glue gun; turn on glue gun and wait until glue is hot; find an attachment that matches the size of the dent; apply hot glue to the attachment and immediately place onto the dent; wait several minutes for the glue to cool, and use the puller to pull the dent out; repeat over and over until the dent is less noticeable or gone. I would note that this process took several iterations and sometimes the glue would get stuck to the plastic attachments and would be a pain to remove to repeat the process. From my experience, I used the puller slowly and eventually the force of pulling would overwhelm the adhesion force and the attachment would pop off. Each time this happened the dent would slowly get better.

Glue would keep separating from pad. Spent 2 sticks on one area. Found that covering the pad on the topside as well helps kinda, but then glue would separate from dented area. I gave up. So now I have this kit just incase I want to give it another try. 2 stars for having a nice kit. Dent on right is what I tried is pictured.

Very good Worked better than blthought it would.

I was very skeptical of the product but after reading the reviews I decided to try it. It worked! I had a dent on my the top of the front drivers side wheel well area and this device did the trick! Its not super perfect as I haven't taken the time to use the hammer and tools it came with. However the main dent is out and it is practically unnoticeable. Must buy!

Price is excessive for what you get.

Excelente equipo de reparación de pequeñas abolladuras, con paciencia y dedicación pude eliminar algunas abolladuras de mi carro. Me fue más fácil obtener resultados en la mañana, ya que en la tarde con el calor, el pegamento una vez que se enfría, es más blando y se me dificulta sacar el golpe, ya que se despega más fácilmente y tiene menor agarre a la hora de jalar el hundimiento de la abolladuras.

This product did the job perfectly! I bought it to replace a car stereo in a 2008 Mazda Tribute and it worked as expected. The material is robust and I could feel the quality when using it. Very cheap price for what you're getting. Strongly recommended.

I used this in an attempt to pull a few very minor dings from a car without painting it. Although the paint was original, it pulled it off to bare metal in about 50% of cases. In a further 30% of cases the dents could not be removed to a satisfactory standard, and required a small amount of filler. Therefore 80% of the work required painting - thus a poor 20% success rate!