for Pixel 6a Battery Replacement Kit, Replacement Battery for Google Pixel 6a Model GX7AS, GB62Z, G1AZG, GB17L with Repair Tools Kit and User Manual

If you need a battery for you Pixel 7a this is the one you want. As good as original. My phone was dropping out at around 50% it would just shut off. The case was a bit swollen too. This battery made the phone like new. Battery lasts for days-not hours anymore. All the tools included worked well as did the new gasket seal. It's not a terribly difficult job and took me less than an hour. The worst part was removing the old sticky gasket. Once complete I followed the instruction to FULLY charge the phone and FULLY discharge a couple of times. Since then it's been like a new phone! Price is great for what you get and what it will do for you--get it!

Installation was easy, though I watched several videos rather than relying on the instruction sheet - which COULD have been more useful if they'd added two suggestions. ONE: Sure, a heat gun can get the phone hot, but there are warnings you can damage everything. Well, my phone has gotten quite hot in the past without damage - how? By accidentally leaving it in the sun. So that's what I did, no heat gun needed, and once it got toasty the adhesive gave way easily, no need for alcohol or any assistance. Same thing for removing the battery, a second dose in the sun heated the screen so the battery came free with easy see-saw motion of the plastic "flosser". I bought isopropol alcohol for nothing, heat did all the work. TWO: My favorite part was replacing the adhesive at the end. It is attached to a plastic sheet that fits over the phone - run your fingernail along the edge and it sticks perfectly in place. A huge relief, since in the past I've had other methods fail and I get mangled adhesive or no adhesive and a loose back cover. NOTE: Once that adhesive is down, there is still a protective cover on the top of the adhesive. Squeeze the back on and it won't stay. But use the tweezers to carefully pull off the protective cover - a long strip of plastic spaghetti - and now when you squeeze the back on, it sticks perfectly. So how is the battery itself? Couldn't tell you yet. It came at 66% charge state. If it doesn't perform well, I'll update this review. Otherwise, assume the best. Functionality: Installation was easy, though I watched several videos rather than relying on the instruction sheet - which COULD have been more useful if they'd added two suggestions. ONE: Sure, a heat gun can get the phone hot, but there are warnings you can damage everything. Well, my phone has gotten quite hot in the past without damage - how? By accidentally leaving it in the sun. So that's what I did, no heat gun needed, and once it got toasty the adhesive gave way easily, no need for alcohol or any assistance. Same thing for removing the battery, a second dose in the sun heated the screen so the battery came free with easy see-saw motion of the plastic "flosser". I bought isopropol alcohol for nothing, heat did all the work. TWO: My favorite part was replacing the adhesive at the end. It is attached to a plastic sheet that fits over the phone - run your fingernail along the edge and it sticks perfectly in place. A huge relief, since in the past I've had other methods fail and I get mangled adhesive or no adhesive and a loose back cover. NOTE: Once that adhesive is down, there is still a protective cover on the top of the adhesive. Squeeze the back on and it won't stay. But use the tweezers to carefully pull off the protective cover - a long strip of plastic spaghetti - and now when you squeeze the back on, it sticks perfectly. So how is the battery itself? Couldn't tell you yet. It came at 66% charge state. If it doesn't perform well, I'll update this review. Otherwise, assume the best.

The battery itself is great! Cheap, works about as well as OEM, and gets rid of the obnoxious limitations Google put on the Pixel 4a with the last update. The accessories however are absolutely useless. Do yourself a favor, get an iFixit kit meant for phone teardowns to do this job. I got lucky and my display had already all but separated from the phone on its own, but I could tell that if I had needed to fight the factory adhesive it would have been wretched with the provided tools. The included replacement adhesives also are a joke, but as a backup backup phone, I didn't really care and just glued the thing. Overall went from about 30 minutes of screen time per charge to about 4 hours.

Came with everything needed as well as instructions and outer sealant. Great directions!!! Would definitely purchase again if needed

Got the Pixel 4 version of this. It's 95% great, except that the instructions for applying the new adhesive ring to remount the case back consist of a single image, and the hand model is actually putting the thing in backwards. Be alert to the asymmetries of the phone to get the correct orientation for the adhesive. Great battery, though. I also appreciated the variety of opening/spudging tools included.

The battery fits correctly, including the cable connection. The instructions are clear. The cheapie plastic tools do the job. And the price is certainly right. If your Pixel 5's battery is swelling up, or failing to hold a charge, this is exactly what you need. And if you're even modestly handy with tools, you can swap the battery in 15 minutes or less.

Ill give it 5 stars, it works... my 6a original battery became swolen and lifted the phone apart in a corner... took it apart and replaced battery with this one and has been working

Cheap battery