TRQ 2 Piece Headlight Assembly Set Driver & Passenger Side Compatible with Toyota Corolla SE XLE XSE 2017-2019 TO2502250 TO2503250 8111002M90 8115002M90

Eazy to install. Fit my 1998 Camry. No flickering. Clear lens. Appearance looks better than old.

Took ten years off the van’s age! Fits perfectly ‘cept the bulb holes seemed a little off, but the upgrade bulbs I had went in with a little work. Well packaged and good quality…especially for the price! You need to plan for dropping the bumper - not hard. Maybe eight 10mm bolts along the front bottom and two 8mm in the fender well. The rest are plastic center pop rivets. OBTW - from Taiwan (yea democracy!)

My factory headlights were getting pretty wore out and despite several tries at refurbing them through the years they finally got to where sanding, polishing, and sealing was no longer working right. So with the prospect of needing to replace them I started looking at getting a new set. Seeing the OEM GM housing costs and having my eyes water, I went through researching aftermarket options. Most have terrible reviews with condensation, cracking, or fading plastic so it was looking like I was going to have to pay through the nose for a set of OEM lights. Then I remembered on my old Silverado I went TRQ years ago for a set of replacements and they lasted and never gave me any issues. With that in mind I pulled the trigger on this set. Out of the box (which props to the care taken on packing these housings in the boxes), these look just as well constructed as the factory housings. Plastics feel quality and not brittle or cheap and the wires seem like silicone insulated wire making them quite flexible and likely more heat resistant. Fitment follows as well with them lining up perfectly with little fiddling needed to get them to follow the body lines and the plugs going in with no trouble. I did try them with the halogen bulbs they came with and they do work quite well, however I have a quality set of LED high and low bulbs so I dropped those in as shown in the pictures. Overall these are great housings and for the price an absolute steal of a deal. Given the issues with the other aftermarket housings (and that most don't include bulbs or wiring anyway) don't even bother with them and get these. Now mind I've had these less than a day at the moment and my review is just based on initial reactions, but I'll report back in a year if I have any issues or items of note.

When I first installed these headlights, they looked amazing. Unfortunately, that didn’t last long. After about 3 days in , I noticed heavy condensation forming inside the driver-side housing. It progressively got worse to the point where the entire housing was completely fogged over. I contacted TRQ support, and their recommendation was to “replace the headlight bulb” for testing purposes. I followed their advice and installed a basic Sylvania halogen bulb. While doing so, I noticed the original bulb was extremely loose in the housing—and the replacement bulb fit just as loosely. After several days, the condensation issue remained unchanged. At that point, it was clear the problem wasn’t the bulb but the housing itself. Due to the ongoing moisture issue and poor bulb fitment, I ultimately decided to replace these with OEM headlights instead. Very disappointed, especially considering how good they looked initially.

Great product. Fits like OEM. Would definitely buy again.

I bought these for my 2012 Subaru Forrester. The installation was pretty straightforward, even though I had to take some pretty large parts of the front of the car apart during the process. Fortunately, I also purchased some extra plastic fasteners because several of the ones that were original to the car were broken during the removal process. I would recommend you plan on the same situation. The headlights did not come adjusted but I had read another review that gave me a heads up on this fact. Before I took out the old lights, I parked the car facing my garage door and marked where the old lights shined on low beams with masking tape. This allowed me to adjust the new headlights once they were installed. The low beams have a nice cut off point and don’t blind oncoming traffic. I was surprised at how bright the high beams are. High beams project well down the road and illuminate the mountain roads in my area very well. I am very pleased with the lights and hoping that they will give many years of service.

The fit and finish was good.. fit right into place no problems there… but the beam pattern is a little wonky.. have some dark spots & sharp edges..and I adjusted them up and down left and right.. got some dark spots out.. price is good all in all a good buy

The headlights are not great, the reflector assembly inside the housing will fall out of the adjustment sockets very easily. Putting it back together is near impossible as its trapped in the housing. Very weak design/quality of parts.

Was so glad to find these on Amazon! Such a great price for both headlights! I have a 2011 & a 2013 Honda Fit and due to age their lights are so foggy and yellow you can barely see at night anymore. These were perfect. The fit was perfect, bulbs were already in them. Easy to install. 5 mins tops. All u have to do is drop the bumper and bolt them in place of the old ones. Definitely recommend to anyone needing to replace their lights. You won’t find a better price!

Então, comprei os dos faróis, um deles está recuperado grotescamente e com o globo interno solto conforme fotos e vídeo, estou insatisfeito com o produto, queria ver uma solução

The headlights will not adjust. The adjusting screws turn but do not move the head lights.