3D Printer Enclosure for Bambu Lab A1 Mini, 360° Transparent Acrylic Enclosure with LED Light, Odor Isolation Noise Reduction Constant Temperature 3D Printer Cover Box, 460x460x460MM

One of the better looking enclosures out there, and includes basically all the features I can think of wanting. I appreciate the provision for active ventilation, which is important with the amount of printing I do. The pass-through for the AMS lite is nicely thought out and allows connecting and disconnecting with little fuss. This modularity is nice since I don't use my AMS all the time, and would rather use the space it takes up for other things. The spool holder is well placed and helps minimize the footprint, which is the reason I got the mini version of the A1 in the first place. It is also 3D printed, which was oddly reassuring, knowing that the manufacturer of this 3D printer accessory utilizes 3D printing as well. This might be a silly thing to be impressed by, but the packaging and instructions were also nicer and more thought out than I was expecting (see pictures). Assumed I'd just get a box full of parts and told to figure it out. Includes decent enough tools and a full roll of neoprene foam tape - I suppose for optional extra sealing, they definitely didn't skimp there. I did note one error on the instructions, when you get toward the end there aren't enough self tapping screws in Bag 2 for installation of the door. There are a bunch left over in another bag, just use those, as that was probably the intent. Another reviewer also mentioned that the self tapping screws did not work for mounting the hinge brackets to the frame, and that he had to drill out holes in the aluminum extrusion. I don't believe they are actually supposed to screw into the frame itself - the self tappers are threaded for tapping into plastic rather than metal, so I just used them as clamps to clamp the plastic hinge brackets onto the extrusion. Over-tightening them in an effort to get them to dig into the metal will just result in this 'clamp' spreading out too much and breaking. This seems sufficient to hold the hinge brackets in place, especially since the rest of the door assembly locks things in place. I think this was the intended installation, though I can see why the label of 'self tappers' could make one think they are supposed to tap into the metal frame. A warning in the instructions about this might help in the future, though the (admittedly small) picture does show them being used as clamps and not screwed in all the way. The LED strip is a nice addition, hidden away under the front top of the frame. It's both practical and makes the whole setup really pop if you care about that kind of thing. Mine was actually missing from the package, but a message to the manufacturer quickly resolved that problem, and they went above and beyond to resolve other small issues/questions I had. They seem to know their product and 3D printing quite well, definitely impressed with their communication and service. Overall, while this enclosure is more expensive than others, I think the step up in quality and aesthetics versus the usual rickety (and dark) fabric ones is far more than the step up in expense, so it's well worth it. In my view: buy once and cry once, and then reap the benefits and extra convenience for a long time.

I rarely write a review. But, I had to for this one. First! I have Not read any reviews on this. I probably should have before I purchased it. Now.. This was the most challenging assembly I've had in many years. The Instructions were a nightmare! 1. The diagram is so small, you have to visually study the parts to figure what they're saying. 2. They use this weird green highlight as a guide, but it makes the diagram that much more difficult to follow. 3. Most of the diagram the wire port is in the front at the bottom. By section 11 it's shown in the back at the bottom. 4. Two of The Hinges I received are not exact and causes the Connector Pin to sit slightly further away and angled. This caused an uneven gap on the end of the door panel. As well as making both doors uneven when opening and closing. This is definitely Not going to last longterm. 5. Every time I open or close the door. The Thermo Graph keeps turning out of position. 20 times of opening and closing the door and I'll more than likely have to read it upside down. 6. I'm not sure why I have 3 extra Profile Connectors left over. I thought there was more to the installation. Especially, trying to read the diagram. 7. It's a little tight on space when the Printer is added. I haven't even tried to add the waste catcher yet. Overall. It looks nice, but the hassle of open and closing the uneven doors I'm not thrilled about. And knowing it's just a matter of time before something breaks off has left me feeling like I just threw away money on something I thought was a great product. Hopefully, the company will reach out.

Being cheaper than the other options, this is definitely the best enclosure for the money! I can see where the cast pot-metal corners might be a bit fragile, but I was just careful inserting them into the extrusions. I plan to purchase a few more for use with Prusa Minis as the factory provided enclosure for those cost nearly four times as much as the Top Cube. The acrylic sheets are thick enough, the doors fit nicely and all the fittings for the A1 Mini are well thought out. I’m very happy with it. I did add a bottom surface (400mm by 2mm carbon fiber panel that fit without trimming) and added squash ball feet, making the enclosure nearly silent when printing.

Really good enclosure so far no issues with it other then the label for the back and left acrylic was wrong the installation process was quite smooth. One tips is try the connecting heads with the connecting bars and try all 3 sides to ensure that the bars are able to slot in nicely.

Sí es un poco complicado para armar y venía roto el termómetro.

The enclosure feels really good quality and went together well. Unfortunately one part was damaged on arrival but I contacted TopCube directly and within a few hours they arranged immediate dispatch of the replacement parts, so great customer service! For anyone else considering this just note that the bottom of the enclosure is open (no acrylic sheet for the base) I was able to contact TopCube for this but also seems to be something local acrylic cutters can supply for fairly cheap.