XVX Low Profile Black Keycaps, Shine Through Keycap Sets, Double Shot PBT Keyboard Keycaps Compatibility for 60% 75% 80% 85% 100% MX Switches Mechanical Keyboard- Only Key caps

So far, I'm very happy with these keys. They look good. Shine through is better than the Womier keys I bought last time. These are the main two that show up in the top result for low profile keys. most of the others are for a different style key (not cross, + sign). The plastic is also thicker on these. If I start to see wear on the heavier used keys in the within months, I'll definitely come back and lower my rating. In the past, getting double shot PBT meant well over a year of heavy use before losing texture, the womiers didn't last but a few months. I'm hoping these fair better, and initial impression is that they will. Getting into the weeds of multiple things if you want... One pic shows these white keys and my older black Womier keys that I'm replacing. Light shine through difference between the two is noticeable in the pic, but... In real life, it's a much more drastic difference. That said, when I used the alternate black keys from this set, while still better than the Womier keys, the light was definitely muted. Neither company is isolating the light from being absorbed by the black plastics. Orings! I ordered some clear orings with these caps. I was using black orings I've had forever, Hopefully you can see the impact on lighting. In pic with ERT in white keys, and YUI in black keys.. from left to right this set, E=no oring, R=black oring , T=clear oring. Womier set, Y=no oring, U=black oring, I=clear oring. You can see that the black orings cause more disruption than the clear on the bottom of the lighting. Makes sense. Clear does still cause some disruption which isn't clear in the pic, but it is there... Orings make the typing experience much more pleasant than bottoming out on a hard surface, especially nice with tactile keys, so it's worth it to me. Also less travel to the bottom. Without orings, my keychron k3 pro has about 50% travel to the actuator, then another 50% to the bottom... One oring helps, 2 orings was slightly better, but muted the light like having a black oring on there. I settled on one oring. I don't overly care about the lighting, but I do like a backlit keyboard, and I don't want my keyboard to look like a cheap piece of junk that can't manage it's lights whenever I look down at it. Other thoughts... Aside from the plastic being thicker itself, the keys are also slightly taller. Really not noticeable to me when typing, just an observation. They provide several different key sizes for keys that might be different depending on keyboard. For example, there are 4 different width shift keys. This makes sure whatever brand keyboard you have, you are likely to have the keys that you need to fit. One thing of minor concern, you really have to push these keys into the key holes with force to get them all of the way in. I was slightly concerned about busting my keys to get them all of the way in. They are very tight to fit in there. I know how that might sound, it just is what it is... I changed rings several times in the process and it was still tight each time. I even pulled a key out of the board one time. Thankfully it's a hot swappable setup, so nothing was broken, I just popped that bad boy back in there and every thing was fine. Side note: I kept my F row keys so that I kept my FN+ indicators. All of these keys that I didn't replace are in the set, I just didn't use them... I wish these key makers would provide decals to stick onto keys for these types of things. I don't use them enough to remember them, and I use them enough to not want to forget how to use them... In the end, none of the things I'm pointing to are gripes, just observations. These seem to be really well made. As long as the texture doesn't wear off in a few months, then these are great keys.

i have a standard keyboard not a low profile so didnt know wether or not they would fit but got them and they fit more than perfect, i installed them on the kisnt kn85. it looks amazing and i love it i def recommend buying these keyscaps, perfect low profile. keep in mind they do change the sound a bit , its still very thocky and creamy but it almost sounds a little more cleaner , like a clean thocky sound rather than that bassy thockk sound. still sounds amazing and i feel my rgb shines through alot better ! looks way better, thanks! (also does get some getting use to type on but very easy)

I wanted low profile shine through keycaps for my Keychron K15. While the provided keys do not offer a 1:1 match to the original keys on the Keychron K15 (outside of the built-in macro keys), there are still enough physical keys that are acceptable to use as alternatives (should also be sufficient for other similar Keychron boards: V10, Q10, K11). Especially as this product does not advertise Alice keyboard compatibility. Honestly, finding low profile keycaps compatible with Alice keyboards is either very difficult or impossible. (Making sure a keycap set is compatible with your Alice keyboard is a general concern.) So considering I was able to make this keycap set work, I'm happy. See the attached picture for details: - I used a 2.25u Enter key for the left space bar, and a a 2.75u Shift key for the right space bar. It would have been nice to include another black 2.25u keycap, so I wouldn't have to use the white Enter keycap. - There is no 2nd "B" key, but plenty of other available keys to use. - I used the 1-5 number pad keycaps for the Macro keys. Other notes: - The keycaps are about 1mm thicker than the retail Keychron K15 keycaps (excluding the stem), but still very low profile. - These sound a little more thockier than the retail Keychron keycaps. - They make the Keychron K15 look surprisingly discreet (aside from the white Enter key), as compared to the retail Keychron K15 keycaps. - The shine through is not as bright as I would have hoped, but it's better than nothing. - I considered B0DPPN1GMC, but they're not shine through, among other concerns. I also considered B0BVYV67QS, but it did not appear to have enough keys for the Keychron K15.

Bought as shine-through replacement for Iqunix MQ80. Fit is good on the stems, I didn’t think they were tight like other reviews noted. However, they did sit slightly higher than the original keycaps which I didn’t care for. Shine through works well, although for larger keys like shift the lighting was a little dim around the edges of the text, giving a slightly inconsistent shine appearance. The texture and quality seemed good/as described but I thought they looked a bit cheap relative to the original set. These would be a fine and cost effective shine-through replacement for the MQ80, I just didn’t care for them personally.

The GMKWTL XVX Low Profile White Keycaps definitely look sleek and stylish with their shine-through design, making my keyboard look clean and modern. The double-shot PBT material is nice, and the keycaps feel durable to the touch, but unfortunately, the overall quality didn’t quite meet my expectations. The fit wasn’t perfect on all the keys, and a few of them felt a bit loose or didn’t sit as securely on my MX switches. The shine-through effect works well for backlighting, but the keycaps don’t seem to be as thick or premium as I hoped. Overall, they’re a decent option if you’re looking for affordable keycaps with a clean look, but the fit and feel could be improved. For the price, they’re okay, but there are better options out there if you're looking for a more durable, higher-quality set.

I bought these for my Iquinix MG96 because I really need shine-through caps since my office space is (intentionally) dimly-lit. I also replaced the switches on that board (twice) so I have installed these keycaps on 3 different switches: the Kaihl Gold/Reds that came with the board, the Kailh Choc v2 Deep Sea Silent Tactiles, and the Lofree "Cloud Series" Pulse tactile switches. They are a *VERY TIGHT FIT* on all 3 switches; so tight that it is not possible to remove the keycaps without pulling the switches out or the board. I didn't damage any switches, but you should know that they are a super tight fit - you will need to press down HARD to get them seated properly, and they will be tedious to remove. They are best for a board you intend to change once and leave alone. Once installed, they look, feel, and sound great. They seem to be equal in quality to the stock, keycaps I removed from the Iqunix MG96. Overall I am happy with them and would buy them again. Just be prepared for that tight fit.

I had keycaps that were opaque and barely let light through the characters, so most of the light was bleed from between the keys, resulting in poor visibility at night. These have almost the opposite problem, where there's so much light on full brightness, it's hard to see the letters. After turning down the brightness, these worked out perfectly. I loved the familiar classic shape, and the color of the printing is exactly like the photos. The keys are lighter than what I replaced, so it feels great for gaming as well as typing. You'll have to push pretty good to put these on, which is great because they feel absolutely solidly installed. The fit and finish are so much better than I expected, and while I don't normally go for that sort of thing, the graphics on keys are pretty cool. I really can't believe how good these are, consisting the extremely low price for the quality you're getting. 10/10, just really really great keycaps.

hese keycaps are fantastic! The low-profile design feels great to type on, and the double-shot PBT material feels very durable with a nice texture. The shine-through feature works perfectly and makes my keyboard's lighting really pop. They were easy to install and fit my switches flawlessly.

Contento con las Keycaps, aparte de que llegaron antes del tiempo establecido, vino completo. Viene con todas las Keycaps necesarias ya sea para teclados mecánicos de 60% como los full.

im loving these keycaps to much pretty much the only ones ill ever have on my keyboard now. it took me a while to get used to using low profile keycaps but after that they feel better to use then the ones that came with my keyboard. there also easy to clean when you do need to clean them and doesnt seem like the images on each keycap will wear off at all. im using them on a 60% keyboard and they work well for it but still remembering all the secondary buttons since its also my first 60% keyboard

Le quedó muy bien a un teclado Machenike, la sensación es lo que estaba buscando lo mismo que lo visual de la iluminación, es para teclados con distribución en ingles por si tienen la duda

I bought these to replace my Keychron keycaps that are not doubleshot (why would they sell a lit keyboard without doubleshot caps?). These look nice, feel nice and the light shines through well. Perfect for what I need.

Finally found this caps able to used and compatible with my Keychron K5 max full keyboard, caps is little bit higher than my stock caps but still okay, no caps for mac comamnd