TOPCUBE 3D Printer Enclosure for Bambu Lab A1 Mini, Large Transparent Window Enclosure with LED Light, Fireproof Dustproof Noise Reduction Constant Temperature 3D Printer Cover, 460x460x550CM

For those curious these enclosures can also fit Prusa i3 MK3s printers and even manage to fit an MMU3 module, with added vibration dampening pads underneath the printers. If you have a Prusa printer with an older silver PSU you’ll need a 90 degree adapter for your power cable so things fit comfortably. Maintains about 10-15c differential from ambient keeping the print space hot and dry while your workshop space is unaffected, does a good job at muffling higher frequency noises, and it is easy to setup (took about 15 minutes to assemble 2). The included light is USB-A powered and has an inline toggle switch to operate the light. It’s a very bright light that easily illuminates the entire print space within the cube so you can monitor the progress of your print from start to finish. I was able to power 3 light strips from 1 Raspberry Pi 5 for testing but moved them to a powered usb hub by Yepkit so the Raspberry Pi can manipulate the lights remotely without also having to foot the power bill. Build quality wise all pass through ports are stitched with the AMS pass through port having an added rubber gasket, the pouches on the side manage to handle typical assortment of print tools you need on hand like needle nose pliers, snips, and various tweezers. The enclosure has a durable fabric on the outside with a large vinyl window that secures in place with two zippers on the same track. The window spans one side of the cube connecting to a circular portal on the front of the enclosure. Getting the printer into the enclosure required fully unzipping the window, then taking out the front visible fiberglass rod which left more than enough room to manipulate my printers into place. I don’t have the exhaust system setup yet, but some light research shows a bunch of community solutions for making your own 3” system if you want and comparatively the kit offered by the maker appears somewhat reasonably priced as well so i may end up going that route. Overall a worthwhile investment, bought one to try and ended up completing my set at 3. Printers aren’t working as hard now to maintain print temps so less power spent, temperature sensitive materials print reliably with less warping and stringing, and the print environment doesn’t contaminate the workshop environment with plastic fibers/bits, heat, or off gases.

Esta hermosa, queda super apretada y cuadrada tiene mucho espacio lo único que no me gustó es la ubicación de el tubo de escape no tengo espacio para acomodarla de el otro lado y eso le quito mucha estética el ducto pasa por encima de la funda pero supongo que no todo se puede y tampoco quise mutilarla por que asi perdería su originalidad y si quiero reubicarla o venderla

its a decent enclosure for the price. I double checked measurements before ordering, and find that it is also a good fit for a Prusa Mini+ with just enough room inside for the spool as well. (I couldn't find almost anything else with dimensions even close.. most were way too tall). So far I can't say that it reduces noise, but should help maintain temperature and capture some fumes.

Perfect in quality and material making. The size fits perfect for a small Monoprice V.2. Even has room for the spool of filament keeping it warm and a temperature gauge outside. Great for the price and design.

Easy to assemble, my printer hunts perfectly