JONSBO D31 MESH SC Micro ATX PC Case with Display, M-ATX/ITX Motherboard/Support RTX 4090 (335-400mm) GPU 360/280AIO, Power ATX/SFX: 100mm-220mm

When I saw this case I was like woah screen built in and when I got it. Found that it is removable even cooler if you don't want the screen or want extra cooling. The case is a very simple design in it of itself and without the screen it will look like a regular simplistic PC case. But still nice looking in its own right. But what drew me to the case is the screen itself and at this price point that's not bad at all. Now the case itself. The quality is pretty nice , light, sturdy and some cable management but not very much but it's not hard to put it together at all. The case has a tempered glass side panel with mesh on the top bottom and front of the case for airflow so you don't have to worry about anything choking. Now the screen the screen build quality pretty good and when I took it out the PC case I was surprised by the quality itself especially for this price point. It has a USB type c and a mini HDMI cable to connect to your PC. It has a power button and a brightness up and down button. The resolution looks crisp and bright in the case. I love it personally lol. Now my initial cons of the case are very little cable management. Other than that everything's good so far.

Really nice tower that was easy to set up. It's very open on the top, bottom, front, and back so air flow works well. The screen on the front is nice as well, though I was never able to figure out the diagnostics they wanted me to put on the screen in the instructions.

This case is a very good looking design with a lot of features. The monitor is more of a novelty that I would say I don't personally use a lot but it's a cool feature to have. The mesh panels on the front and top allow a lot of air to keep parts cool and there is plenty of room for most gpus. I currently have a 3 fan RTX 3080 in this case and a 280mm AIO. The power supply is an 850W and I ran into a space issue with the front fan (120mm) mounting just because the size of the power supply. The psu cage is adjustable with about 4 different spots but if you want a fan in the front then the highest psu spot just barely fits to allow a fan. Also for spacing, there is very little room for any cable management on the back side on the case so I wouldn't recommend running an rgb hub. Ultimately, this is a great case. Definitely pleased with Jonsbo and the product they have so far!

I took a chance on this case and was very happy with it! All of the exterior panels, including the front and top, can be easily removed with no tools. The screen will refuse to work unless you send it 800x1280 - so video sources like cheaper USB to HDMI dongles may not support the needed mode. The screen has controls on the side, as well as a power button to turn it off as desired. I used an adapter to get USB 3.0 from the motherboard header to power the screen and run the USB->HDMI converter. Rainmeter provides some fun free options to use the screen as shown in my pics. Build quality: The build quality is surprisingly good. Everything pops on and off in a crisp, satisfying way. Nothing about it feels cheap or flimsy. The panels are very easy to remove and assemble in an intuitive way. Cable management: There are holes located throughout to pass cables from the main compartment to the "basement" behind the motherboard. In this area there are a bunch of eyelets to thread cable ties through to keep everything tidy. There's also a nice internal trim panel to hide the nest of cables that comes out of the power supply. The case also includes a cable from the back of the PC to the power supply, which is convenient.

I purchased this for my daughter's PC to alleviate high temp problems and for the front LCD screen. The case arrived very quickly and packaged very well to ensure safe transport. Setup of the components was very straightforward and a pleasant process. I did not need to modify anything in order to get everything working from first boot. My daughter's PC is a 14700k with a MATX mobo, a 3080ti, and a 240mm AIO. This case can fit a 360mm AIO if you wanted. The screen is connected to your GPU via HDMI (it comes with the case) that has a cutout to come out of the back of the case and is plugged into your GPU. The display is powered by a USB port which also comes out of the port and plugs into the back of your motherboard. If you do not have an extra HDMI port available on your GPU you will need a HDMI to displayport adapter (found on Amazon). The screen amazingly has GSYNC/FreeSync compatibility (60hz). If you don't want to use the screen on the front of the case, it also comes with an aluminum front cover that looks nice. Coming from a SFF case with poor airflow this case lowered the CPU temps by 15 degrees which is significant. The case allows 3 fans on the bottom for intake, 3 fans on the top for exhaust, 1 fan on the back for exhaust, and 1 fan on the front for intake. Because there are so many fans you can run them on low and still achieve excellent cooling performance while keeping the PC near silent. I like the simple design, easy setup/installation, cool temps, and great looking screen. I would definitely recommend this case to others for the exceptional value.