6-Pack Mini Hygrometer Indoor Humidity Meter, Mini Digital Thermometer Humidity Gauge Meter, Indoor Thermometer Hygrometer Monitor Fahrenheit (℉) for Reptile Thermostat, Jars Reptile, Fridge

I'll jump in with the pros and the cons. There will be some overlap. Pros: - A cost effective solution for knowing the temperature and humidity level. Considering you get six of these guys, it's an amazing buy. - Small and compact measuring approximately 1.875 by 1.25 inches. Numbers are easy to read with the humidity number being displayed most prominently. - Fairly accurate. Measuring them against each other on my desktop, all read between 68.7 and 69.4 degrees F with humidity registering 36-38 percent with one showing 36, three displaying 37 and two showing 38. I'd note I do have a small heater running at one end of my desk, so this to me falls into the fairly accurate for the price category. Cons: - No way to calibrate. - These were designed to clip into something, though I don't know what. There are clips on the sides of the units. - While they are free standing, there is no way to set them at an angle. - They do feel pretty cheap, so durability and battery life are questions I can't currently address. Recommendation? Yes, I think I would recommend them for simple, basic information. I intend to put a few of them into my seed starter trays to keep an eye on humidity and temperature when I start my plants, so who knows how they'll do in that warm, humid environment. But I'd order them again given my overall first impressions.

Why did you pick this product vs others?: A few months ago we bought a small 3D printer, but along with a printer you have to buy filament, and figure out a way to store it. Then there's the issue of moisture - too much and your 3D prints won't turn out well. I found these small hygrometers which work perfectly to put 1 in a bag or container with every roll of filament, to keep an eye on the humidity levels. These hygrometers may not be precise enough for scientific use, but for home uses they're fairly accurate and small, so they work great for our purpose. When they first arrived, we set them all on a table next to each other for about a day, to see if they all measured the same temp and humidity, there are slight variations but they all measured fairly close to the same so they seem accurate enough for our purposes. If I end up with any extras, I plan to also keep one at my desk at work since it's such a small item that takes up almost no space.

Hygrometer is accurate but the temperature is way off. All the ones in the pack showed different temperatures but same humidity rating. They all come with batteries and already turned on curiously… Overall filled my use for them, temperature reading wasn’t as critical for me.

I recently picked up this 6-pack to manage humidity levels across different environments in my home, specifically for my instrument storage and a few sensitive closets. After using them for a week, I've found them to be an exceptional value for those who prioritize broad coverage over high-precision laboratory standards.

Fast changing, extremely sensitive, and in tight sync on humidity. I bought 18, and placed then in a row across my work bench. After they settled in, they were within 1% of each other in a very interesting way... You could see waves of change, if one went up by 1%, usually it's neighbor would, and that would ripple across the line. Or there might be several waves sweaping from an end and the middle... It was interesting to see that they were all responding to the environment in sequence with the neighbor. This tells me they are quick responding and fairly sensitive. I am in an extremely dry environment, with humidity artificially increased by a swamp cooler, so I am testing the low end of the range, 20% to 30%. If your humidity dwells higher, you may get different results. These type of i9nstruments are more accurate at 75-85% than they are down where I use them, so accuracy is not pertinent in my use case, Instead I will be using these as a quality of storage indicator and alarm, so when I pull a roll of 3 year old nylon down, I can tell if it needs a 2 hour dry cycle or if it needs days more. A "freshness" indicator that I can read without opening the package. Humidity was within 1% of the units neighbor. However temperature was closer together, but the fractional degrees were all over the place... Most of the temperature sensors are closer than the humidity, but because the temperature scale is hundreds of points in either direction, the temperature looks like they are a little father apart, but really they are as close or closer than the RH%. The quality of the sensors are very high to all be in agreement, but these are too cheap to be calibrated, if that is important to yo, do some testing with a calibrated meter. I have a wet bulb and a calibrated meter in the shop, but like I said mine are not being used in a way for best accuracy, but these seem surprisingly high quality so I suspect accuracy is either very good, or at least very repeatable and consistent. These are the best I have tested so far. I will package these with sealed and dry filament, and the levels read will be wrong... Th

Perfect for my 3d print project - cereal tubs + these + desiccant = win! makerworld model 850603 Perfect fit, very reliable. Easy to snap right in, did not feel like they would break or lacked durability. The humidity level reading is accurate (they match when paired up) and they are readable through the cereal tubs!

The temp readings are accurate within +/- 1.5F in my testing, but the humidity levels are kind of a joke depending on what you're testing. In the 35-50% humidity range, these readings are usually off by 0% to -5% of an accurate reading (these don't seem to be calibrated at all before leaving the factory). However under 15% humidity, these seem to be accurate to about 0-3% from a proper reading. I'm using these for PLA storage containers so they're what I'd call 'good enough' (I just need to make sure my filament stays close to or under 15% humidity). If I had to choose between less than $2/meter vs $10/meter for an accurate reading, I'll take these. It is close enough to know when something is wrong if you don't need precision. I just wish the listing was more honest about this. If the listing was honest about their product, this is easily 5 stars for the cost. Pros: Temperature is +/- 1.5F in my testing Easy to use out of the box (no set-up needed) Battery pre-installed Perfect size for a standard fit Easy to read Cons: Humidity is 0% to -5% accurate in my testing (up to 50% humidity, so it may be less accurate at higher values since accuracy seems to scale in this manner) Lack of transparency in listing Summary: If you need accuracy (esp at higher humidity levels), avoid these. If you need a general estimate where accuracy isn't a necessity, these are an amazing value.

Works perfect