LIONSCOOL Multifunctional Wall Mounted Pull Up Bar with Pulley System, 48" and 16"/24" Multi-Grip Chin Up Bar, Cable Pulley Attachments Included, Perfect for Upper Body Workouts

Why did you pick this product vs others?: Very solid feel to this. As others have said the weld angle is weird. It’s not by design, either— with mine fully set up and the bar completely level. The left perpendicular support is almost perfectly vertical. Where is the right one is off by as much as 3/4 inch. This is fine to deal with but my advice: 1) if using over drywall, to help spread load on drywall first place some 1/2” or 3/4” ply strips against wall, as instructions mention. 2) ignore the drill hole sticker. Given the lack of 90 degree weld it’s useless anyway 3) use a stud finder to confirm center stu 4) hold in place and mark hole locations 5) the TOP screw on each side is the one that is responsible for preventing pull out from wall more than any other. It’s gotta be strong. If you’ve plywood in place over drywall the included 3 inch lags now have only 1.5-1.75” left. Forget them: go to Home Depot and get a 5” LedgerLOK brand screw. (3.5” stud + 1/2” drywall + 3/4” ply + the 3/16 thick metal means a 5” won’t blow throw your wall). LedgerLOK are intended to hold ledger boards against a house to support a deck. Very strong. If concerned the screw is too long get a shorter one or a 4.5” HeadLOK. All of these are structurally rated AND longer than the lag bolts of unknown origin that come with this kit. 6) pre drill with 5/32 bit (smaller than the shank of headlock but still will assist in preventing slipping) 7) use headlock at least for the very top bolt on each side. The middle and lower holes are less important and the bottom is only shear anyway, which you’re never gonna have fail 8) once it’s set up hang your entire body weight on each corner one at a time. It won’t move, and now you’ve also proven that if each side can take your entire body weight, hanging from middle means your actual sets are only 50% of what you tested Anyway, I’m also using the pulleys and the pulleys are actually pretty darn good with a nice bearings. Last thing: if your perpendicular parts are off 90° like many people are, you can use that pre drilled bit to slightly angle the hole back toward the stud so it bites center. As for a stud finder get a Franklin one from here or blue box store—the one that has all the lights on it. They are cheap and good.

High quality, very solid takes time to hang it properly but feels very secure the pulleys work smoothly lots of exercises can be done with this piece of equipment

⭐️⭐️⭐️⭐️⭐️ Excellent pull-up bar! Super sturdy, easy to install, and grips feel comfortable. Great for building upper body strength at home — highly recommend! Solid build and perfect for weight plate workouts!. Great value for home gym setups.

Very well-made, if I was to say anything negative it would be the Cable system is kind of limited, but still very happy with it.

This thing is awesome! I had a pullup bar tower before, but it was a little too low for me, and it was strictly a pullup bar at the top. This is wall-mounted, so you can put it where you need it, and it comes with some extra attachments which help with other exercises. My favorite part is that different hand positions you can have. It's super sturdy, well made, and very versatile. Just make sure you get lag bolts in the studs (it should go without saying, but PLEASE DO NOT HANG THIS FROM SHEETROCK). All in all, this is a must have for your home gym!

Quite impressed. I mounted it in the garage on a plank of wood about 3.5' long 1.5" thick and 9" wide that I screwed into the studs. Assembly was easy and held my weight well.

Installation was a bit tricky, but after some time and effort it’s rock solid and sturdy. Parts are good quality and the pulley system works well.

It took more time figuring out the best, safest way to attached this in a room (rather than on cement) with drywall/studs. We figured it out after a lot of back and forth between us, sent a message via Amazon to the manufacturer to make sure that the method we decided on to install the unit was appropriate and safe; they responded within a day so that was good; they confirmed we were going about it the right way. We did not use any of the hardware that was included, instead we bought bolts, washers and screws that were rated higher than the weight required; also bought a 2x4, 3/4 inch multi-layered plywood. We don't use the rope pull down that came with it, instead opted to buy a straight bar for about $21 on Amazon. The bottom line is this: it is well worth the purchase even though the only items we used was the pull-up bar (stabilizes the overall unit) and the frame. See pic: It is sturdy, size perfect for our use (we are retirees). btw: 9 foot ceiling height; the top of the frame is 2 feet 2 inches from ceiling. I am 5'2" hubby 5'11" so we split the difference in height to accommodate us both. (the bands you see hanging were an addition purchase we made, again on Amazon.)