ARCTIC Freezer 36 - Single-Tower CPU Cooler with Push-Pull, Two Pressure-optimised 120 mm P Fans, Fluid Dynamic Bearing, 200–1800 RPM, 4 Heatpipes, incl. MX-6 Thermal Compound

Quiet Cooling with Strong Performance The ARCTIC Freezer 36 turned out to be a solid CPU cooler that checks most of the important boxes: cooling performance, noise levels, and installation ease. Out of the box, it feels well made and thoughtfully packaged. The included MX-6 thermal paste is a nice touch—saves me from having to buy an extra tube and ensures proper thermal transfer. Installing the cooler wasn’t difficult. The instructions were clear, and the mounting hardware felt secure once in place. It’s a single-tower design with dual fans set up in push-pull, which gave me confidence it could handle a decent load without sounding like a jet engine. And that’s exactly what I experienced: even under heavier CPU use, it kept temps in check while staying surprisingly quiet. The fans spin smoothly thanks to their fluid dynamic bearings, and I barely noticed them ramping up. A few things to keep in mind: it’s a tall unit, so make sure your case has the clearance for it. Also, while the cooling is very good, it’s not meant for extreme overclocking—this is more of a strong, quiet, reliable daily driver cooler than a max-performance monster. Bottom line: A well-balanced CPU cooler that delivers quiet, efficient cooling with minimal fuss. Great for builders who want solid thermals without a lot of noise.

Pretty good cooler, not too many problems on my end and installation is pretty simple. Getting pretty good airflow through my case and temps are nice and cool.

Super quiet, easy install, comes as advertised.

This is one of the best air coolers I’ve ever used in a build. I bought this in a process of replacing an old machine that went kaput on me, and that cooler used was an air cooler as well. No issues with that machine for what it’s worth, although the cooler in that machine was a Hyper 212 EVO back in 2016 which kept an i7-4790 around 40c. That machine now has an i5-4690 since the CPU died and had to be replaced, same temps around 40c. Not too bad. Compared to what this cooler is doing currently for a 12600KF in my current build, it is running as low as 19c and up to 26c, granted I’ve turned off some cores and turned off hyperthreading BUT, the huge difference for what I tend to use this machine for with this cooler, this is very excellent in what I’d want to use for what is essentially a file server/archival PC and as the replacement of the other aforementioned build above. Hands down, one of, if not, the best price/performance ratios for a budget air cooler I’ve seen in a while. After watching some reviews and comparisons on YouTube from GN, this can also fit the bill if your wattage usage for a CPU is pushing 200W. At that range it should be fine for keeping things cool but definitely not anything bad per se. The only thing I can say that may be a warning is if you’re installing on an Intel board you will need to be careful when installing its somewhat custom motherboard CPU bracket mounting system, which should be called the ILM, since there may be, not sure how much, a risk of shifting a portion of the CPU socket on the motherboard. You may want to have something underneath the motherboard to keep it from slipping. Useful information can be found on YouTube channels installing this. I did reference GN for this install, and it was not too bad for me. The reason why this step is needed is to make a better contact of the CPU heatsink contact with the CPU since most motherboards will not fully make contact with the CPU heatsink and CPU based on its ILM. If you have a new build, if you can afford one of these for its introductory price, I’d say it’s a great one to consider. After some time the price may increase but its still not to say its not worth it but depending on what’s available you can check and do comparisons on what else is offered in the market of air coolers. After the 3 months of this being released the price may change but we can only tell once/if this happens. Overall, I really like this CPU cooler for what it has done so far in keeping my CPU cool.

Discovered that my computer's performance was suffering lately because it was thermal throttling due to the CPU (5600X) reaching 95 degrees Celsius. My previous cooler, the stock AMD Wraith Stealth that comes with the 5600X, must have been dying or something. Installed this one, and in high load games that were previously hitting that 95 C threshold, my CPU barely went above 60 C. Personally I thought it was loud, but maybe the Wraith Stealth is abnormally quiet, and I was just used to that. I use headphones most of the time anyways, and there's plenty of room to adjust the fan curve in case you wish to trade noise for increased operating temperature that is still well within acceptable ranges. I can actually feel the air being ejected out the back of my case, to the point that I'm almost not sure that my rear case fan is necessary. The fact that it's compatible with other 120mm fans is a nice innovation. So, as a cooler, it's great. As for the deducted star: The cooler comes with an Intel mounting bracket, Intel mounting screws, an AMD mounting bracket, but not AMD mounting screws. The installation manual assumes that you'll have the old AMD mounting screws, but the Wraith Stealth cooler is installed with integrated spring loaded screws that cannot be conventionally removed. No idea where the original screws could be, since that was installed years ago. I say "conventionally" because I was able to bend the screw clamps open to remove the screws and use their springs with the included Intel mounting screws to install the AMD mounting bracket. I think that it should be possible to redesign the screw holes in the AMD bracket to allow the Intel screws to fit that too. Either that, or just include AMD screws as well. Having to perform computer surgery to make this work feels like a very preventable complication. At the very least, make it clear on the product page that you need the original AMD mounting screws so that customers can buy new ones if they're in a situation like mine.

Artic is the best without having to sell a kidney

Easy to assemble and install, with all the parts and tools necessary to finish the job, including thermal paste. Instructions are also available from the manufacturers website in the form of a short video. The only issue I encountered was self inflicted, as I did not identify the airflow arrows on the fans and had to reconnect them. Since they just click into place with light pressure it was no big deal. So far it is keeping my i7 cpu very cool, but I have not stressed the system yet. I do not anticipate any issues going forward. Very satisfied with this purchase as it seems well built and quiet.

Wow! Despite its price point, it is a surprisingly effective and very silent air cooler. I am quite impressed! The video reviews I checked before deciding for this item were positive, and my experience so far confirms their conclusions. Update: Just to add a bit more color, I am using this cooler with an Intel Core Ultra 7 265KF. No over-clocking. Operating temperatures consistently between 34 and 36 degrees. RPMs remain slightly under 1000 consistently.

Der ARCTIC Freezer 36 hat mich wirklich überzeugt. Für einen Single-Tower-CPU-Kühler liefert er dank Push-Pull-Setup mit zwei 120-mm-P-Lüftern eine überraschend hohe Kühlleistung. Selbst unter Last bleiben die Temperaturen stabil, und das bei angenehm niedriger Lautstärke. Die druckoptimierten P-Lüfter laufen sehr ruhig und lassen sich über PWM (200–1800 rpm) fein steuern. Im Idle sind sie kaum hörbar, unter Last wird die Drehzahl zwar höher, aber nie störend laut. Das hydrodynamische Gleitlager sorgt für einen gleichmäßigen Lauf ohne Nebengeräusche. Auch die Verarbeitung ist top: 4 Heatpipes, sauberer Kontakt zur CPU und eine sehr einfache Montage für Intel & AMD. Ein großes Plus ist außerdem, dass MX-6 Wärmeleitpaste direkt beiliegt – qualitativ hochwertig und mehr als ausreichend. Fazit: Der ARCTIC Freezer 36 bietet eine starke Kühlleistung, leisen Betrieb und ein hervorragendes Preis-Leistungs-Verhältnis. Ideal für Gaming-PCs und leistungsstarke CPUs, auch ohne direkt auf eine große AIO setzen zu müssen. Klare Kaufempfehlung!

Super

Quality heat-sink, as described.

Flinke jongen voor mijn 5600x maar is ook toekomstbestendig als ik naar AM5 upgrade ooit. Houdt de cpu super koel en ik heb nu een temperatuur van 65 vollast. 👍

Güzel ürün, yanında anakart için adaptörler de geliyor. Üstelik mx-6 paste de geldi. Tavsiye ediyorum. Am5 anakartlarda kullanılabilir. B650 Eagle AX için aldım, sorunsuz çalışıyor.