Silicone Mold Release Spray (Silicone-Based) (16.9 floz/500ml) - Resin & Epoxy Release Agent for Smooth Mold Removal with Ease, Universal Use on Almost All Molds

Does not pool, works perfectly for releasing epoxy resin from it's mold, and no odor.

If you work with molds—resin, epoxy, silicone, candles, or even soap—you know how critical it is to get a clean release. Nothing is more frustrating than spending hours on a project only to have it stick, warp, or tear coming out of the mold. This spray solves that problem entirely, and I honestly wish I’d discovered it sooner. Right out of the box, the packaging gives a premium feel. You get 4 large 500ml cans, which is a generous amount and goes a long way—especially considering you only need a light mist for each use. The spray head delivers a smooth, even coat that dries quickly without any sticky or greasy residue. It doesn't interfere with the clarity of resin or dull the shine, which was a concern for me initially. I've tested it on various mold types: silicone, plastic, even older molds that are starting to lose their non-stick surface. In every case, the difference was noticeable. Resin pieces came out effortlessly, even those with fine details and sharp corners. I’ve also used it while making candles and small epoxy trays—it works across the board. What really stood out to me was how much easier cleanup became. My molds stayed cleaner, required less scrubbing, and showed less wear over time. This spray has genuinely made my crafting smoother and more enjoyable. Instead of stressing over mold release or doing re-pours because of stuck pieces, I can now focus entirely on creativity and execution. It’s given me more confidence to experiment with complex pours and intricate molds. For hobbyists, small business owners, or anyone doing mold-based crafts, MRealeazy Mold Release is an investment in quality. It elevates your work, protects your tools, and saves time—what more could you ask for? Highly recommend. I won’t go back to crafting without it

Arrived perfectly packaged, and works wonderfully! I have used Epoxy Resin before, but didn't even know a release spray existed until I was shopping around to start up the hobby again. This is my 1st one I've ever tried, so far I've only used my molds to reshape skate wax, but the mold release spray worked amazingly. I took each mold outside to spray the inside, so the fumes weren't in the house. I squeezed the molds a few times just to make sure the release spray got into every nook and cranny them poured the melted wax in. I was able to demold each one perfectly, with no issues without even putting water in the mold like some suggest. So you can visualize I used fairly intricate molds that were various Halloween shapes, ghosts, ghosts with pumpkins, and a realistic spinal vertebrae shape. The spine one had the tiniest details, and it demolded with no issues! I just wiggled the mold down in the opposite direction of the details. This stuff worked fantastically and I will definitely get more once I run out! I will try to remember to update this once I start using the Epoxy Resin again!

The spray release worked well for my silicone mold The only drawback was the spray mechanism Keeps falling off .

If we take care of our silicone molds, they’ll last much longer. Part of that care is to use a silicone release spray after every use of the mold. This is simple to use: Shake the can, remove lid, and quickly spray a mist over the mold. I’m a frequent trainer and although I use this all the time, I’ve had this can for months. Great value — it does what it’s supposed to.

work good with only minimal spay

Excelente

I tried this release spray on a silicone mold that, frankly, probably did not need it because of the flexibility. But I wanted to try it on that first before using it on a larger project. The project released easily (as it probably would have had I not used it) but what I did note to be different (than in projects where I did NOT use it) was that the side of the project that had the spray had dull areas. To be determined to see if it comes out with sanding, but I really did not want to have to go through that process. I did follow the instructions and used this as a very light mist vs spraying on with a lot of product on the mold.

Works perfectly. No sticking between PLA mold and Silicone pour

This didn't work anywhere near as well as other release agents I used in the past and when I requested a refund, I never heard anything from the seller.

Leaves an oily looking finish on the resin

The stuff is garbage, acts more like glue than release. Silicone mold and plastic mold both ruined and I have done hundreds of pours in the past. Lots air and fumes but nothing else,