ESR for MagSafe Car Mount, Car Phone Holder, Tesla Touchscreen Car Mount, Magnetic Phone Holder for Car, for iPhone 17e/Air/17-12, S26/S25, Pixel 10, Charging Not Supported(2 Metal Rings Included)

I bought this for my Polestar 3 so that I could mount my phone next to the center screen. This mount works like a champ! Installation was easy but you should wait 24 hours before using it with your phone so that the adhesive cures on the back of the screen. Since installation and countless mounting and dismounting of my phone, the holder has not budged! I assumed from other mounts that I’d have to adjust and re-tighten the mount arm from repeated use - I was wrong. The are has not budged at all, which I find impressive. I have a mag-safe case on my iPhone 17 Pro Max and can confirm that the mount’s magnet is very strong. The phone does NOT bounce or jiggle as i drive over less than optimal roads. It’s quite solid. Once mounted I can easily tilt the phone front/back and left/right with ease. It’s tight so I don’t find myself having to readjust at all. With so many mounts out there you just never know. One tip: make sure that the back of your screen is flat. I believe most are, but if there’s a curve it may be more difficult to get a solid attachment to the screen. Once attached, the arm and MagSafe connector is adjustable.

This mount functions just as stated and as it should! It fits in many positions and has tons of adjustment. Super easy to install, tons of suctions. All you have to do is clean your mounting surface, push it on, clamp it and go! The MagSafe magnetic phone mount is really strong, with no fear of my iPhone 16 Pro falling. It’s pretty mobile and can be reused easily. I liked it so much I bought another. To sum it up, it’s strong suction and MagSafe mount, has multiple points of adjustment and stays where you put it! If you have a stiffer riding vehicle you may notice a little bit of shakiness, but you can fix that but changing mounting position or arm length so don’t worry. Just buy it, give it a shot and I promise you’ll love it!

There are a bunch of cheap phone mounts but this one stands out from them all. This one is made of aluminum with a nice gun metal gray finish. It’s a nice touch in my truck. For those of you that drive the new Silverado, you know it’s hard to find a good spot to put a phone mount as the dashboard doesn’t give many options to mount. Additionally, I’m not the kind of person that’s going to stick something directly to the leather dashboard. So the options were quite limited. I found this spot right on the grab handle to work out very well. It supports vertical and horizontal mounting very well. This phone mount is very nice. I highly recommend because it feels very sturdy and fits my truck aesthetic nicely. The 3M tape they give (with one additional just in case) seems to have a great adhesion and doesn’t seems like it’s going to fall off. The instructions were extremely clear. Overall I have to say 10/10 product.

I’m invested in a halo lock MagSafe magnet for my iPhone case and love it. So I decided to try their ESR halo lock dash mount. So far I love its quality, design , flexible mounting options and positions and Straightforward instructions. Now for the magnet . Let’s just say the magnet holding power for the phone is killer! It’s actually a little too strong for my liking. You have to pull it extremely hard on the phone to release the phone from the magnet. I find myself having to push down on the mount body while pulling hard in the phone. Basically a quick one handed grab of your phone while a NOT possible. It requires a bit too much effort. And depending on the temperature and what surface it’s mounted to, I can see the suction cup pulling free or even the locking arm being tested. Although I’m happy I’m sure my phone won’t fall off the mount when going over harsh road conditions, I wish there was a happy middle ESR could find with its magnet strength. I like to be able to reach in to the vehicle and quickly grab my phone so this isn’t really possible with this magnet. As seen in my photos I have it mounted in my commercial work vehicle so I needed to ensure the magnet would hold over bumpy trips. I’m happy so far other than the crazy magnet strength and not a deal breaker for me. I am happy with ESR products so far and will continue to buy them. 1- update. Regarding the overly strong magnet. Today I went to take my phone from the mount and due to the extremely strong magnet it actually pulled the halo lock MagSafe adhesive add on magnet off my case. Today was warmer than it has been in a while so I assume it softened the adhesive on my case and that’s what made it easy for the too strong magnet to pull it free. I may have to return this mount Update: seller was outstanding in helping me with the issue that I disliked about their product. They made it right and I couldn’t ask for better customer service. They went above and beyond and communication was outstanding. Although this item didn’t work for me I purchased ESR products before and will continue to do so. 2 update- this seller has made every accommodation to satisfy me and help me find one of their other products that better suit my needs. Don’t hesitate to use this seller and their products.

The parts feel solid and premium. I have an iPhone 15 Pro with an ESR case that in turn has strong magnet. It works great with the ESR car phone holder that locks to the iPhone using magsafe. I’m yet to check out the holder on rough roads. But so far, it is as sturdy as it gets.

Super strong, sturdy and smart! Did not require a charging mount, just a MagSafe magnet to mount my new iPhone to. I stuck the dashboard anchor to a Brodit Proclip and it is perfect- exactly what I wanted. Rotation is great and the phone does not budge. My iPhone is in an ESR halolock clear case. The adhesive on the anchor appears strong so hoping it holds up. I have found finding the perfect phone mount for an Audi A1 near impossible, but this setup is pretty close to perfect!

This magnetic phone mount is thoughtfully designed and very solid. The foldable arm tucks neatly behind the Tesla screen when not in use, which keeps the setup looking clean and minimal. The magnet strength is excellent and keeps the phone stable even on rough roads or sharp turns. The adhesive backing feels strong and has held up well in the heat without peeling. The included magnetic rings make it easy to use with older phones too, which is a nice touch. What I like most is the adjustability. You can tilt, swivel, or rotate the mount freely to find the perfect angle without blocking the display. It feels well-built, simple to use, and looks great inside the car. Overall, it’s one of the most functional and secure mounts I’ve tested so far.

With the Mercedes you have the difficult air vents. This product is the perfect solution. The sucking cap is sticky and strong. The arm itself has a wobble but is required when u drive over cobblestones or holes in the street. The arm has good locking mechanisms to stay in place and the magnet grips the phone strongly and confident. The head can rotate 360 degrees to your choosing. Excellent product and very happy with my purchase

Wonderful product i like once you put your phone its hard to remove magnets are so strong. While driving if roads are not good its shakes. But phone never fall & i am using s24 ultra