Super PDR Light Board PDR Light Dent Line Board LED PDR Light USB Battery Powered Reflection Light Board Professional Dent Repair Tool Automotive Repair Lighting PDR Reflection Tool Car Body Repair

PROBLEM: Our car had 5 fairly prominent body dings: Driver door (1), trunk lid (1), driver side rear wheel well (3). THIS TOOL: Product came packed extremely neatly and carefully. Very professional kit and includes a fairly complete set of the stuff you need. PROCESS: Degrease the dented area with alcohol. Attach one or more of the provided tabs onto the door with hot glue. Wait a few minutes for the glue to cool Use the gold anodized puller tool to exert a smooth steady outward grasp on the tab and pull the dent. HINT 1: Eventually, the glue fails, leaving a glob of hot glue on the car, but (hopefully) a smaller dent than before. You may need to repeat this process 2 or 3 times per dent.) HINT 2: The hardest part of the whole process is getting the glob of hard glue gun glop off the car once you finish HINT 3: Even glue removal is not that difficult. In between pulls, just get most of It using the scraper tool. HINT 4: I found that if I coat the blob with liquid car wax, scraped off bits do not smear around and adhere again. Like using peanut butter to remove chewing gum, the wax prevents the chunks from reattaching. Wipe again with alcohol afterward to ensure the next tab will stick. HINT 5: Some dents may pull out beyond flush. If your hot glue adheres really well, you could actually raise a small lump in the sheet metal. This is not a problem, however....a little hammer is provided and a soft tool you can use to gently pound any proud areas back down. I got them close with the tool and then rubbed a strong heavy cloth-wrapped thumb with firm pressure over the repairs, pressing heavily into the steel. This actually smoothed out the metal almost perfectly. SUMMARY For the most part, this system did a really good job. It pulled every dent outward, improving the looks of each one. DISCLAIMERS 1) We had some dents that were apparently made by some sort of pointy object. Those did not come out 100%, but they still look much shallower 2) Directions are somewhat in Chinglish, but much better organized than most and with great photos.

Got this one for a dent on my hood. The set is pretty good, especially for a beginner like me. It’s seem to have everything you would need to repair small or even bigger dings and dents.

I used this paintless dent repair kit to repair a few door dings and a shallow hail dent and it performed well overall. The different pullers give you good control and the glue gun heats quickly so you can get started fast. The tabs held firmly and the glue cleaned off easily once I was done. It does take a little practice to pull evenly and some larger dents may not come out perfectly, but for everyday cosmetic fixes this kit is very useful. The tools feel sturdy and the instructions are clear, making it a solid choice for DIY car care.

*Super PDR Paintless Dent Repair Kit 148PCS Dent Puller Kit with LED Light Board* ****EDIT - I am changing my rating a bit to 3 1/2 stars because the seller contacted me and offered (and gave me) a full refund for my entire purchase, as well as offering me a replacement light board with a battery. Top notch customer service in my opinion!**** I bought this a few days ago and used it yesterday. Here are my thoughts/complaints. First and foremost, my biggest complaint is that the light board takes some kind of special rechargeable battery, and they don't send one with the kit!...lol. EVEN THOUGH, if you watch the vids on it, they show the battery being put in. Few things irritate me more than false advertising, or failing to disclose pertinent details of the product and what's included. AND, the only way to plug in the light to actually use it is by USB. And you guessed it, unless your car is parked right next to some sort of USB outlet, the light utterly useless, unless you have a special USB adapter that is not included either. Also, the light doesn't offer much articulation, which makes things a bit more difficult as well. The rest of the items seem to work well. If I REALLY cleaned the area, AND the pulling tips, with 91% rubbing alcohol and a couple different clean rags that didn't have fabric softener on them from being washed, I had very little problems with the glue not sticking. In fact, most of the time, it stuck too good for me and was very difficult to get off. Also, I'm an above average mechanical person, and have detailed cars for decades as well, but if you think you're gonna just buy this kit and pull dents out and have it look perfect (or even really good) immediately, you will be wrong. I learned yesterday there is very much an art to this, and learning the metal rigidity of your vehicle takes several tries to understand how hard to pull, as well as what size/shape tips to use, and placement and such. Pulling too hard results in the dent looking worse than when you started. Would I guy it again? No. Not because I'm not an instant PDR pro (I actually enjoyed the learning process and challenge), but because, for me, it's very difficult to use without the battery.

This is a great kit that includes everything you need to repair nicks and dings on your vehicle. It comes with a variety of attachment heads in different sizes and shapes, making it versatile enough to handle all kinds of situations. The size and location of the dings will determine which pulling method works best for you. The kit includes a standard hot glue gun and glue sticks to attach the pulling points. The dent puller with a squeeze handle or the bridge puller is ideal for smaller dings. For larger dings, you'll need to use multiple pulling points, or you can opt for the suction cup puller, the T-handle puller, or the slide hammer, which are better suited for bigger dents. If you're dealing with a large ding, you can start with the T-handle or slide hammer to pop the dent out, then switch to the bridge puller or squeeze handle for fine-tuning. The kit also includes a handy reflector board that quickly reveals any depressions or raised areas that need attention. There's a small hammer with a protected head for evening out high points on the surface, and an air pillow that could be useful for dents in areas like lower door panels—just inflate it behind the dent to help with the repair. The kit comes with a straightforward instruction booklet that provides a step-by-step guide for fixing dings, and a squirt bottle for alcohol, which is needed to remove the hot glue after the repair. Keep in mind that if your car is in direct sunlight, the hot surface might prevent the glue from holding properly, so it's best to work in a shaded area or a garage. Overall, this is a convenient kit for fixing dings at home and saving money.

Looked like a good kit, but the dent puller broke on the 1st try due to poor quality. It looks like metal but it is brittle plastic. It ended up cutting my finger when it cracked. Also, the glue gun is terrible! The trigger doesn’t pull the glue and you need to push it through. Did a return and had a local shop do the dent repair

This painless dent repair kit is Super. I was so excited that I was able to get a dent out of my car without disturbing the paint. I watched many YouTube videos to see how it’s done and I was so amazed that with the PDR light and all the tools I was able to remove the dent even though I can tell it’s not perfect but at a glance, it is much better than the way it was before the kid comes with all the stuff you need including a glue gun, a PDR light kit and all the tap downs and little knobs that you need it is good value for the money compared to what you would have to pay outside repair shop to fix

The kit is great for the $ and you can usually catch a sale or coupon. The kit itself is good quality, nothing feels super cheap; full disclosure I have not got around to using a lot of the kit just yet. If you're just starting out, this is a great starting point and will go a long way for getting out smaller dents. Funny enough, I tried the suction cup on a large panel dent on my father's truck bed and popped it right out and the cup actually stuck really well, despite my expectations for that particular tool anyway. It comes with two types of adhesive sticks to get you started and the glue gun is perfectly fine and would compare to any budget craft store one. I have read that the glue tabs do break and this upsets people but they need to understand that they are not necessarily designed to be used multiple times no matter how much you spend on them. You can likely find packs of them by themselves relatively inexpensively and should plan on that if you have several dents you plan to work on or some really creased dents with hard lines, as those are going to require a lot more force to begin to work out.

Easy to use and works great

If you message them, you'll get the same repeated auto response. A return option is available at your cost. Then they repeat the same "we're sorry, your satisfaction is important to us..." Product was shipped in a taped brown box and works some of the time.

Silverado 2009, golpeada de granizo, pensé que quitaría las abolladuras, de todo lo que viene solo me sirvió la siliconera, el martillo, cincel y la franela, lo de más realmente no me funcionó o no supe usar las herramientas, terminé empastado y repintando el daño de la camioneta

Cumplió con todo en excelentes condiciones y muy bien empaquetado

I needed to re-apply the glue stick 4x for the dent to be mostly pulled, but otherwise a good kit.