IS-67-XT Black 67mm Height Low Profile CPU Cooler 6 Heatpipes CPU Air Cooler for HTPCs, ITX, and Small Form Factor Builds, 120x15mm Slim Fan, Support Intel LGA1700/1200/115X, AMD AM5/AM4

Great fit and style. Doesn't touch the ram cards and looks amazing. Does the job even in older systems. Cooling stays consistent and fan is silent. Mounted fine with instructions

A fantastic small form factor cooler if you are space restricted. I'm using mine in the Fractal Terra and I've been loving it. The fan on the radiator can be a bit noise though, so I swapped it out for the Noctua NF-A12X15 and my temps have gone down dramatically. I'd recommend this cooler to anyone building a small form factor cause. An added benefit is the finstack can cover the top of low profile ram as well, allowing you to cool your ram and cpu at the same time. I really appreciate that as I'm in a very restricted case. Ultimately I higher recommend this cooler as it has great ram and vram clearance and is able to be used in so many different small form factor builds. It's definitely not going to be better than a cooler that is taller than it, but it is very comparable to competition from Noctua and Thermalright. The only thing id recommend to do is change the fan to a more quiet fan if you are concerned about noise. The actually cooler itself can be a bit of a pain to put on so the ease of installing does suffer a bit. Outside of that it is a really good cpu cooler and id recommend it to anyone building small form factor. Functions well and looks amazing.

aesthetics are unrivaled, easy installation and good thermals, perfect for many sff builds. also as a bonus, the fan its included with is really nice quality and feels sturdy.

This little cooler had proven QUITE effective in my use with a 7800X3D and 9800X3D. Both are on Xproto open-air frames, but the cooler easily handles both chips, keeping gaming temps 70C or below, and is nearly silent under any gaming load. The low-profile blends nicely into the Xproto design. The cooler comes with a multiple-direction mount for AMD so you can turn your cooling in the orientation to best suit your needs. Mounting it as I did the downdraft gives my VRMs a direct airflow and the orientation of the fins means the NVME drive gets solid air movement as well. If your board has too large of an I/O area cooler the various orientation options mean you can find an orientation that works for you with ANY motherboard.

First, the size. This cooler is very compact and fit snugly in my ITX motherboard (ASRock B550M-ITX/ac). You are given the option to orient the portion that has a bulk of the heat pipes in one of two configurations, and I was able to install it with no conflict to either my RAM or VRM heatsink. Installing the cooler was not difficult, the tools they provide are enough and the instructions are straightforward but kinda IKEA-ish so if you are having difficulty installing it you can find a youtube video that walks you through it (I did). I'm planning a small form factor build and momentarily installed this cooler in my micro-ATX case (Cooler master 300L) where I currently I have a Ryzen 7 5800x. This CPUs tend to run hot as it is, and I can definitely hear the fan kick in under full load, yet this cooler keeps it at a toasty 70C allowing me to maintain high clocks. I will say that high air turbulence negatively affects cooling in many cases. I saw this in my case (pun intended) which contributed to the higher fan noise, but changing the placement of my intake and outflow fans helped with both the cooling and the fan noise. Always make sure to not significantly disturb the flow of air exiting the cooler so that it can cool the heatsink with cooler air rather than recycled warmer air. The fact that the fan pulls air from the heatsink rather than blowing it down helps keep motherboard components cooler. If you are thinking of installing this cooler on an AMD system you should be adjusting your PBO settings in order to optimize your cooling as it is. This is a great buy for anyone making a compact system, just plan ahead and consider your airflow. I look forward to putting this to use in my Cooler Master NR2000 case.

Prime member - ordered on Saturday, delivered Sunday morning. Installed by noon on Sunday. Compared to the stock Intel Core i5-11400 cooler, dropped idle temps from ~43C degrees to ~28C degrees (20C ambient room). Under 100% CPU usage, dropped from 89 degrees to never over 60. Fan rarely needs to ramp up. Coming from AIO's for the last 15 years, absolutely fantastic low profile air cooler. Best part was the stock cooler/motherboard already had a backplate, I just had to modify the mounting concept, using my own screws and it installed in less than 30 minutes (without the need to remove the motherboard, for an off-the-shelf system with a riveted back panel). Used Arctic MX-6 thermal paste for the install. Best $40 cooler I've ever purchased, would buy again without question.

Works and functions great. You won't be cooling the latest and most heavy duty CPUs with this fan, but for me, its fine. I ran a bunch of games. 1080p is a joke. 1440p I ran into some performance slow downs and issues but it was expected given the setup. In the small form factor builds, you are going to need to be realistic of your expectations. In my setup, it looks like i have about 4mm of space on both sides of the CPU and GPU. You don't want either side very close or touching the sides or you'll experience some turbulence noise that the case in my picture is known for. You can avoid it by just having a 3mm or more space on both sides. I max the fans and the noise wasn't bad. Most games i ran at 1080 optimized played perfectly fine. During game play, it stayed at 65C or 150F. Sometimes it spiked to 70C or 160F but it never stayed there. Usually only at start up of the game. At 1440p I got some higher numbers but nothing to be worried about. High 60C's on Mechwarrior 5 Merc and Clans; Space Marine. Both at max settings and the CPU was fine. Although on MW5 Clans, i did have a reading of 91C or 194F but it was only a spike and fell back at the low 70Cs after. It occurred on start up of the game. Cooler seem good for now. about 20 hrs of game play heavy load. Only thing I would recommend is to not use the included thermal paste. I've heard very little about this company's paste and what i did hear, wasn't good. Get something better quality. I would upgrade in the future for a better fan for the cooler as it seems to be at 1800rpm only. Other fans for sale run higher at 2200rpm or more. My Setup Parts: Mother Board: ROG Strix B650E-I Ram: Crucial DDR5 Pro series 32 gig SSD: TForce G50 - 4TB PSU: Cooler Master SFX 850Watt ATX 3.1 CPU: Ryzen 7 7800x3d Thermal Paste: Artic 6x Cooler: ID-67 XT GPU: MSI 5070 Ventus 3x OC edition Case: Fractal Design - Terra

Keeps cool and very quiet. Bit of a pain to install with my intel chips etc as the motherboard needed removed but other than the extra time to install great for the price.

Cheap. Affordable and solid in a sff build with a 7800x3d. Holding temps around 75 degrees.

So far ID cooling has done nothing but impress again and again. Put this in a mini ITX build that I was looking to make as silent and light as possible. Did a fantastic job. I did swap out the fan for an ID cooling 120 mm as I had a ryzen 7 700x with a very 3060 12 GB that I repaired after a friend said it was toast. Just needed a mosfet replaced. Anyway, great fan!

ID-COOLING IS-67-XT BLACKは、全高67mmというロープロファイル設計ながら、6本のヒートパイプと120×15mmのスリムファンを搭載した本格的なトップフロー型CPUクーラー。 HTPCやITX構成など、スペースに制約のある小型フォームファクター環境での冷却に特化した一台です。 実際に組み込んでみると、まず驚くのは冷却性能。 同じロープロファイル帯のC7系クーラーと比較しても、負荷時の温度は約10℃以上低く抑えられ、TDP150Wまで対応する設計は伊達ではありません。 Ryzen 7クラスでも安定して運用できる冷却力があって、Deskmeetなどの制限付き筐体でも十分に対応可能です。 設置性も良好で、Intel・AMD両対応のマウントが付属。 AM4環境では純正バックプレートを流用する仕様で、部品の判別に少し注意が必要ですが、図解を見ながら進めれば問題なく取り付け可能です。 ただし、付属グリスは硬めなので、別途用意すると作業がスムーズになります。 ファンは15mm厚のスリムタイプですが、静音性は意外にも高く、アイドル時はほぼ無音。 必要に応じて25mm厚の高静圧ファンに交換することも可能で、冷却強化の余地も残されています。 ヒートシンクの配置によってはメモリとの干渉が起きるため、ヒートスプレッダ付きメモリを使用する場合は注意が必要です。 限られたスペースで冷却性能を最大限に引き出すための“実用型ロープロファイルクーラー”。 小型PC構成において、冷却・静音・拡張性のバランスに優れた選択肢であり、空間に整う冷却環境を求めるユーザーにとって、静かな勝利をもたらす一台です。

Very impressive performance for a low profile cooler. I am using a stock 7800X3D in an NR 200 case and in Cinebench its barely reaching a max temp of 80 C° which is great, its actually outperforming a single tower cooler I used by a significant margin (Hyper 212 Halo) which is really impressive. I am using the stock slim fan, so if I used a noctua A12 25 mm will probably get even better temps. Sound is ok too and depends on your case, louder than average on load but not so obnoxious thats its annoying.

Way better than i expected. I did replace the fan though because slim fans are little less effective. But even with the original it is good.