HICTOP Ender 3 Neo Hotend Ender 3 V2 Neo Hotend Assembled Hotend with Silicone Socks and 0.4mm Nozzles for Ender 3 Neo, Ender 3 V2 Neo, Ender 3 Max Neo 3D Printer

Easy to install, good value, fast delivery, constant temperature, low noise, good adhesion, good fit, no alignment needed

Perfectly replaced the OEM hot end. We finally got a blob of epic proportions and the easiest thing was to just swap hot ends. This worked like a charm. No issues so far.

The product didn't come up with instructions. So, I went on the website for my Endor 3 neo. Found a video with instructions. I installed exactly as the video showed. Even took pics as I took out wires from the board so I would know exactly where they came out. Took out my old hot end and replaced. Ran into a max temp error. So, I took it apart and double checked all the wiring. Making sure nothing got bent kinked or not put in all the way. Spent days referencing videos and tried again. Checked the Bed Thermistor Cable, Thermistor wire, even checked out the other wires. So far found nothing that can be causing the problem. But after referencing all the troubleshooting videos and emails, I was told the problem is most likely a faulty Thermistor. This is not a good product and I don't suggest it. I'm requesting a refund on this and will be returning.

Worked well. Just make sure Bowden tube is pushed tight the whole way to the bottom! many do not check this then complain about the hot end not performing as it should. It needs to be check on all hot ends of this style construction.

So far this is working great. perfect fit.

I have used the official Creality video showing how to replace the hotend. It takes some time, but essentially it is a straight forward process. I did had to do PID autotuning after the replacement, as the hotend temperature was not steady. The PID autotuning solved that issue.

First one had thermal run away plus or minus 15’C. Second on they sent me the printer screen started up and had a warning sign of hot bed and hot nozzle as soon as you powered it on. Parts are junk would not recommend

We were having problems with filament getting stuck. This seems to have resolved the problem.

Working great for endee 3 neo

works perfectly

Required this to replace my existing hotend,it was very responsible priced and came so quickly

had to resort to Youtube videos to fit it. When I finally got it working, the filament temperature was fluctuating wildly. Google said this can happen when replacing, unless you use genuine Creality parts. Luckily it settled down before I had to get too technical