Creality Ender 3 V3 SE 3D Printer 250mm/s CR Touch Auto Leveling FDM 3D Printers with Sprite Direct Extruder, Dual Z-axis & Y-axis Auto-Load Filament, Upgraded Ender 3, Print Size 8.66x8.66x9.84 inch

Very good printer just remember to check the screws are still tight on upright on the sides after a lot of printing because thay do come loos after time

Worked great for a couple of months. Now useless. Doesn’t print properly. Bed gets stuck and grinds on the gears. Awful product

I’ve been very impressed with this 3D printer so far. The setup was straightforward thanks to the partially pre-assembled design, and it didn’t take long to get everything ready for the first print. The instructions were clear enough to follow, making it a good option even if you’re relatively new to 3D printing. The printing speed is noticeably quick while still maintaining solid print quality. The auto levelling feature works well and removes a lot of the usual trial and error, which makes the whole process much less frustrating. Once it’s calibrated, prints come out consistently with good detail and clean layers. The direct drive extruder feeds filament smoothly and handles common materials like PLA and PETG without any issues. The dual Z-axis design also helps keep prints stable, especially on taller models, which improves overall accuracy. Overall, this printer offers a good balance of performance, reliability and ease of use. It feels well built and capable, making it a great choice for hobbyists or anyone looking to get into 3D printing without unnecessary complications.

My first ever 3d printer and absolutely great item prints well really easy to use create value for money and has a great auto levelling setting making thing a lot easier

This would be a 5 star review if it wasn't for a couple a issues. 1st is that if you tighten the screws too much attaching the screen to the printer, the threads on the printer will come out and the screen will not attach. The sd card reader supplied didn't work and I had to buy another 1. Apart from that great printer.

My Ender 3 packed up after 6 years. The V3 was an obvious replacement.20 minutes to assembly. Auto level worked perfectly. Installed a programme using my soft ware, and printed first time perfectly. Much quieter even without dampers. An improvement on a printer that was already very good.

The Creality Ender 3 V3 SE was surprisingly easy to assemble—everything came well-packed and the instructions were clear. Within an hour, I had it up and running. For smaller prints and quick projects, it performs really well. The print quality is solid, and it’s a good entry point into 3D printing without breaking the bank. However, I ran into a major issue with the auto bed leveling feature. During one print, the sensor failed to properly level the bed, and the nozzle ended up digging into the surface. Unfortunately, it ruined the print bed completely. For a printer that markets auto-leveling as a key feature, this was a huge letdown. If you're planning on using this for casual or light projects and you're comfortable keeping a close eye on it, it can still be a great tool. But be warned—the auto-leveling system isn’t foolproof, and if it fails, it can cause some serious damage.

Terrible experience.. and this is buying direct from the manufacturer. If you are not experienced with 3d printers and you get one of these faulty ones, its going to ruin your whole experience. On mine 1. The print bed was lose... the linear bearing were slack, so much backlash on the bed. It's not the rail. It's not the bearings, its the plastic housing the bearing are slid into are the wrong size...? It took ages for them to send me a replacement, land the replacements are still faulty.. therefore I had to make my own modifications. 2. The new and improved direct drive print head was faulty.. they would not accept it was faulty.. i recorded a video of it coming apart, all the screws were so lose they fell out on printing.. If I could send it back I would, but all they want to do is delay you with emails, and posting things by sea mail. They need to sort this out.. this is supposed to be a 3rd or so generation problem, that has been designed specifically to make it easy to new comers, yet what they have done is dumped a poorly assemble nightmare on the uninitiated.. After spending many hours of stripping modding and rebuilding it now prints well, but this is not to be expected from customers?

What can one say? The filament goes oh-so smoothly through the bowden, and the tubing, itself, isn't prone to sharp bends. It's easy to cut to size and I've had no problems using it for my prints.

This is genuine Capricorn tubing, and not the cheaper PTFE tubing that usually comes with printers. These have tighter tolerances, and I recommend them over generic PTFE tubing - especially if you plan to print TPU and do not have a direct drive system since the tighter tolerances help reduce how much the TPU compresses in the tubing. Printing TPU at 40mm/s worked great with these. Also, if you plan to print using filament that requires higher temperatures, I definitely recommend this tubing. It will last longer for all uses including 200 C PLA, but it is especially helpful when used for higher temperatures over 250 C. And the price ($11.49 at the time of this review) is competitive for genuine Capricorn tubing.

I have been enjoying using Capricorn tubing for my 3D printers. So far no issues, just make sure to cut the end going into your hot end so that it is completely flush (I've seen some where it was, and others where it had a slight angle). I am taking a star off because my initial delivery was a set of nozzles labeled as Capricorn tubing. Return and replacement went fine, but it added time to the delivery and shouldn't have happened. Overall, still highly recommend, but make sure to check your package when it arrives.

I'm overhauling a 3D printer (I usually run them stock until they need work, then replace the extruder, hot end, and tubing all at once) and got this for the job. Great to have extra on hand as spares, too.

This is a simple and cheap upgrade to your 3D printer to reduce the amount of snagging or snapping of filament, especially if you're using higher temp filament. I'm using this to replace the stock tubing on my Ender 3 Pro and have had zero issues so far.