24" 40-Pin 80-Wire Ultra ATA 2-Drive Ribbon Cable, Manhattan 332781, Model:, Electronic Store

Works well for the xbox original from what I can tell. I will mention that, like other comments, mine was slightly on the short side if inserted properly. If the middle insert were seated a bit closer to the blue insert, everything would be fine. All the same, pretty good

Does the job in conjunction with a startech adapter in an OG XBOX. I was able to get a good routing with it too without any weird twists, just a come folds

My first soft modded XBox finally gave up the ghost. I thought, (hoped) it was the cheap 80 wire ATA cable I had installed way back in 2014, but no…. The cloned 120GB Western Digital PATA Hard drive finally broke down. 14 years is a pretty good lifespan for one of those! Time to go hard mod on the system, and install a modern SATA hard drive. As for this new cable, it’s a vast improvement over previous versions available back in the early soft modding days. The others were very short and had to be twisted and folded like oragami to get it to connect, which is why I had hoped it was the cable that went bad. This new cable still needs careful folding, but is longer and isn’t under the tight stresses those old cables suffered. I would say it fits loosely inside, when folded and routed perfectly. I tested this new cable out on another Xbox, just before I sold it, and it works good, and the price is really good for such old obsolete tech! People are still modding these things, well over a decade later, it’s nice to know that this obsolete tech is still adored!

It works just fine with OG XBOX. It connects to XBOX, CDROM, and harddrive just fine. The XBOX recongizes my sata drive adapter.

Works perfectly for my modded Xbox. Perfect amount of length too.

I've done a few Xbox OG softmods without issue. On this past upgrade I did everything as I supposed to have but system kept crashing and giving me a code 09. I ordered a new board and HDD from eBay, thinking something could be wrong those items. Even order 2 more different IDE adapters. After checking and re-checking I come to discover the cable was bad. After spending close to an extra $100.00 on parts and all, I bought another cable and problem was solved and has never returned. Just saying before blaming other components or throwing out the console, try a new cable. The cable has worked flawlessly everything I needed it to until this last round, but the replacement cable is doing just fine.

Good quality cable. Especially for upgrading or repairing the original xbox

Worked well with no issues on my original Xbox 1.0 when I used it with a startech IDE to SATA adapter and put in a SSD. Months later it still works great.

I didn't know it could be a little rare to find a good IDE cable in 2023 but this one is a good IDE quality cable like the old days. Long enough and works perfectly well.

ケーブルに寿命があるとは考えもしていませんでした。 大変たすかりました。

Works as intended. Expensive but not many options for this length I got this to install a 2TB SATA HDD into my original Xbox console. Works perfectly with this and a Startech SATA to IDE adapter.

Received as advertised. Seller shipped fast and packed well. Highly recommend!

初代XBOXユーザーには令和の時代でも必要となるリボンケーブルですが、 注意点として、オリジナルのリボンケーブルとは接続端子の向きが違うので、 オリジナルと同じ感覚で接続するのはやや難しいです。 強引にやれないこともないですが、海外の方がとても参考になる動画をアップされていますので、 これからチャレンジされる方は以下の英文をYOUTUBEで検索して、参考にされるのが良いと思います。 How To Fold Replacement OG Xbox IDE Cables!