Flashforge PLA 3D Printing Filament 1.75mm 1KG/Roll,1kg Spool (2.2lbs), Dimensional Accuracy +/- 0.02mm, Fit Most FDM Printer (Black)

Used on a flashforge adventurer 3, needed more after 300g sample ran out, couldn't be bothered to calibrate or run filament tests. So worked fine out of the box. Nice gloss finish, sticks well, bought at £15 per kg, it's not too bad for some quality PLA

Best filament I have used so far. The shine gives a really good finish. Printed well and good adhesion. Will try a different colour next but black is my favorite so far.

Total waste of money. Firstly the adhesion to my heatbed has been terrible. I have NEVER had to use tape until I tried this PLA. Secondly I have never had to change a nozzle but this clogged 3 nozzles in just over a week. Thirdly - the PLA ranges from 1.6 - 1.9mm in diameter (might be the reason for the clogs). I also had to drop my flow rate down to 92% to get anywhere near a decent print - but then it clogged the nozzle and messed it up anyway so another waste of time. I will not be using the remaining reel as it is too much hassle.

Bad adhesion, supports came off the print bed. Very stringy. Ended up printing a load of face shield frames for NHS as those don't require supports. This filament is useful only for prints without retraction and without supports.

If you want a good basic PLA then this Flashforge is as good as any and after quite a few rolls I can say this with confidence. I never have any problems with the diameter or with the wind of the rolls. It sticks to my PEI print beds as long as they are clean and pops off with no fuss. I use with Ender 3 printers and a CR20-PRO with the same settings.

I found this filament not consistent when heating up I started printing at 200c and it's fine for the first 100 layers then the print starts to delaminate until I increased temp gradually up to 245c it works but you have to experiment a lot with this. After using this product for long periods I am changing my review I found that my bed was bowed to begging with now that is sorted this brand of filament is my go to brand I have since purchased various colours and all work brilliant.

it's quality, worth every penny. it has a shiny finish and its durable.

This is my 4th Flashforge spool of filament - and up until this point it's been great. It's really cheap compared to most other offerings, yet still makes great prints and feels high quality. Now the bad part. It broke my £1000 printer. The filament had been wrapped around the spool very poorly, meaning it had become tangled and was crossing over one another. This meant the filament just became stuck and stopped feeding, completely wrecking my printer. After this incident, I will never be going with Flashforge filament again. I'd just rather not risk it - and I'd honestly recommend you to do the same.

Buen filamento, cumple con su proposito

Ottim, anche ad alta velocita' di stampa.

Another solid experience with Flashforge PLA. It feeds smoothly, adheres well to the bed, and produces clean, consistent prints. The black colour comes out deep and even, and surface finish looks tidy without excessive stringing. I haven’t experienced any clogging or feed issues so far. Easy to use and performs exactly as expected.

J'ai voulu tester cette marque de filament et je ne suis pas decu du tout, une tres bonne qualité, un enroulement nickel, je ne peux que recommander.

Das Filament ist sehr angenehm zu drucken, da man keine Probleme hat und die Drucke bei verschiedenen Maschinen super raus kommen.