VONFORN Paint Sprayer, 700W HVLP Spray Gun with Cleaning & Blowing Joints, 4 Nozzles and 3 Patterns, Easy to Clean, for Furniture, Cabinets, Fence, Walls, Door, Garden Chairs etc. VF803 Yellow

Former handyman here so I have done my fair share of painting - I was in the market for an airless paint sprayer alternative to my big Graco unit. Seeing this unit and reading the reviews, I thought "why not, it's only $40." I was really surprised how well it actually works! Being an HVLP unit is sounds like a vacuum cleaner, but it can really lay down the paint! Clean up was a breeze with all parts dismantlable to get under the water. I did thin the latex paint, and was using flat paint, but if you have small projects to spray, I'd recommend this unit.

I finally got it out for a project. I watered down the paint as required, the little measurement cup is a pretty cool way to check viscosity. Loaded it up, and started spraying. I had a 8x6 area I needed to paint, pretty low priority for looks, as it is going to be hidden by another structure, so I figured it would be a good place to make mistakes. 5... Literally FIVE minutes later, I was done spraying.... And it looked... Good! Some over spray in one area I wasn't as careful, but I even adjusted the nozzle on the fly to get a different angle for the rest. Fantastic coverage, easy layering, no runs, no ugly spots, just even, clean coverage. I'm excited to finish this project now, and am going to try different paints in it to see what other things I can paint with it!!!

I've used and owned other hvlp and airless sprayers before, and I am surprisingly impressed with this one, for the price. I was concerned that you can't adjust the airflow, only the fluid amount but after using it, I found that this wasn't an issue anyway. I sprayed 30 year old, painted, kitchen cabinets that had been lightly sanded and it came out as smooth as you can expect for older cabinet doors that weren't in great shape. At first, I sprayed the primer (Behr cabinet and trim primer) a little too thin. I was worried about going to heavy and getting drips and runs. but it turns out that I could have gone heavier. Then I did two coats of Sherwin Williams Emerald trim paint, alkyd enamel water-based paint. Again, the first coat was probably a little lighter than necessary but by time I put on the second coat, I did go slower to get a heavier spray and it covered very well with no runs. I did have the cabinet doors laying flat, not hanging though so that might have helped the pain level out. The paint does need to be thinned considerably. The manufacturer recommends no more than 1/2 pint of water per gallon -- I'm not sure what I used but it was closer to a 1/2 pint per quart, in order to get it thin enough. You must use the thinning funnel to test how long it takes for the paint to drain from it to make sure you have it thinned enough. I thinned it to about 50 seconds until the cup was empty. However, on the primer, I didn't thin it quite as much and the tip clogged up a couple of times and it spat out large drops of primer so had to thin it a little more. Be sure to practice if you've never used and hvlp sprayer before. Do some nice, even passes, overlapping the previous pass by 50%. Start the sprayer when it's pointed just OFF of the piece your painting and continue across and end off the other side of the piece. Do not start and stop it on the thing you're painting itself (unless it's very large, like a house or fence) otherwise it will get too heavy where you do the turn around. I'd recommend this for smaller projects: shutters, doors, garage door, cabinets, furniture, maybe a deck -- but I'd go with a much faster Airless sprayer for larger things, like a wood fence, house, shed etc. This goes slower than an airless and you'd constantly need to be filling the cup with paint to finish the project. I definitely would NOT use it to paint walls in a room, it's way slower than a roller. I'd recommend using it for a closet though, since it's more difficult to manuever a roller in a small space. It uses surprisingly little paint to get good coverage though. I used under 1 gallon to cover both sides of 27 cabinet doors, 9 drawer faces and all the cabinet faces. I was surprised that's all it used. Overall, it works great for the price but, as with anything, a lot depends on the user's experience, comfort level and willingness to learn and practice.

Use this paint sprayer for the first time today. Didn't really have any problems with it, except it uses. More paint than I thought. But that could be because I was painting 4 sections of lattice, 36 inches. Wide by 8 feet long. And there's no way to stop the spray from going through the holes of the lattice, which is wasteful. I get that. But so far it seemed to paint well, I didn't thin out the paint I use latex paint with primer .used the 2.0 tip because of being roughwood.

I’m really impressed with this paint sprayer. It was easy to assemble right out of the box and very user-friendly, even for someone who isn’t a professional painter. The spray patterns are adjustable, which made it simple to get an even, smooth finish on different surfaces. The motor is powerful and consistent, and it handled paint well without clogging as long as it was properly thinned. Cleanup was also much easier than I expected, which is a huge plus. It saved me a lot of time compared to using brushes or rollers and gave my project a more professional-looking result. Overall, this is an excellent value for the price and a great tool for home improvement or DIY projects. I would definitely recommend it to anyone looking for a reliable paint sprayer.

I bought another brand and spent $140. I couldn’t get it to work good. Tried this one!! And sooooooo much easier. The paint went on so good and dried perfectly. A really great purchase! Don’t go to Home Depot for this. Get this one.

This worked out well for a wooden fence. Better than my Wagner! No drips, simple to put together and easy to clean. Can’t beat it for the price.

I picked this up for a fence staining project and honestly wasn't expecting much from a budget sprayer. Figured I'd use it once and throw it in the garage to collect dust. That's not what happened. Out of the box it's well-stocked: four nozzles (1mm, 1.5mm, 2mm, 3mm), a viscosity cup, cleaning brush, needle, filters, and a couple of adapter joints for blowing dust off the surface before you spray and for rinsing the line with a hose afterward. That flushing feature is genuinely useful. Cleaning is usually the reason I hate painting projects and this makes it much less painful. The motor is loud but powerful. On large flat surfaces like fence boards or cabinet faces, the finish comes out smooth with no obvious lap marks. The three spray patterns (horizontal, vertical, circular) actually make a difference depending on what you're covering. Circular works fine for most stuff; horizontal is better if you're doing long vertical boards. A few things to know before you buy: ignore the viscosity cup guidance for latex paint. It'll tell you to thin way too much. A small amount of water, maybe half a cup per gallon at most, is all you need for most exterior latex. If you follow the cup numbers you'll end up with paint so thin it won't build any coverage. Also, this thing goes through paint. It's efficient in the sense that you cover ground fast, but the paint consumption surprised me on a lattice section job where a lot of material passes through the gaps. The blowing joint for pre-cleaning surfaces is a nice touch that most cheap sprayers skip. Small thing, but it shows some actual thought went into the design. It's not going to replace a professional airless rig for a whole house, and the cup capacity means you're refilling more than you might want on a big project. But for furniture, cabinets, decks, and fences? It more than earns its price. If you've been putting off a project because you didn't want to deal with a brush and roller, this is a low-risk way to get it done.

The rating is not really about the product. It could be great for all I know. It was advertised on Amazon UK but the device is for US users with US voltage and US plug so a non-starter in the UK.

The device burned in my hand after three minutes or less of the first use

Its not the same brand in the adver، returned ✋🏽. تم استلام قطعة غير مطابقة للصورة، تم ارجاع المنتج.