Sea Foam Motor Treatment Fuel & Oil Additive, SF16, 16 oz, Pack of 24

GREAT product! I own a "mature" car with lower milage. However the low idle was off and slow, additionally learned that a Gas station provider (occasionally use) had been found to have water in their gas. After reading the reviews and learning many auto mechanics swear by Sea Foam, decided to give it a try. As a woman have experienced hype, un-necessary work etc through the years. I used a funnel to add Sea Foam to my gas tank. Wow! even on shorter trip, noticed a smoother performance. With longer driving seems to have helped the idle and running even smoother! Believe that with more use will see even better performance and hopefully better milage! Do Not Hesitate, you and your vehicle are worth it! Thank you!

Good stuff... tested in Generator (not that it needed testing, we all know its good)...Placed into my generator-- zero issues, tested later...zero issues..and I'm sure in a few months... sitting idle (at least I HOPE it sits idle, that'll be different reviews on survivual stuff lol)... good stuff. I'll put it into my gas (at the appropriate levels), all day! Been a fan for years, still am. Question is:: Why don't they just have this in all our gas?? Anyway...boat+generator for me -- 1000%

We have a small-engine mechanic who turned us onto SeaFoam motor treatment -- and against most gasoline preservatives and treatments. He said he'd drained, or seen inside, thousands of gasoline tanks, and the stuff sold as gasoline storage additives was often still there, sitting as gel on the bottom of the tank. Just gunk. He also said most brands of engine treatment weren't worth the money. However, he swore by SeaFoam, which I'd never tried at the time, and my experience since has proved him out. I've had many rough-running engines find their power and performance again, with nothing different, but a shot of SeaFoam in the gas tank (and the crankcase). We own a number of vehicles and equipment with small engines, from a compact backhoe, to a ride'em Husqvarna mower, weedwacker, chainsaw -- and on the larger size, a Honda SUV and Ford F150 pickup. All of them have benefited greatly from the regular use of SeaFoam. However, when we're running the road vehicles a lot, especially in the summer, we go through gas and don't necessarily add SeaFoam with every fill. Recently, the Ford began to run rough. It stalled as I pulled up to corners and lights. In the past, that would have meant a mechanic and an expensive tune-up. All I did was go for a fill-up, and started by adding a full can of SeaFoam. Problem solved, just like that. The Terramite (made in the USA) backhoe is not used a lot -- and as with most motors, that is a problem. It's bad for an engine not to run it -- and especially, in most cases, for it to sit with gas in the tank. The backhoe has a Kohler Command 25-horse gasoline engine that powers the hydraulics that run the wheels, steering, front-loader, and backhoe. I change the spark plugs each season, but it, like my Stihl chainsaw, and 6500 watt backup (gasoline) generator, and for that matter, all the small engines, can be hard to start after a hiatus. And even when they get going, they'll run rough. I used to drain the tanks frequently, then run them dry, then fill again before use, and hope for the best. But SeaFoam has changed all that. Throughout the summer, I can leave treated gas in the tank, and have little problems with starts or rough running. In the smaller equipment, I dose the gasoline with each fill (1 oz per gallon), as SeaFoam cleans both carburetors and full injection systems. It is good for gasoline and diesel engines. Added to your crankcase (1.5 oz per quart of oil), it cleans deposits and quiets noisy lifters. These days, most gasoline is mixed with ethanol and that's a bad thing for small engines. Ethanol goes hand in hand with water -- and as we all know, water in the gas is anathema to motors. Again, my small engine mechanic told me, 90% of the no-start problems he had to deal with were caused by ethanol-caused water in the fuel system. SeaFoam actually controls moisture and prevents this problem. It also de-ices and is anti-gel. In my opinion, when it comes to gasoline and diesel engines, large and small, SeaFoam is THE Silver Bullet. My equipment is often running, while my neighbors are running with theirs to the shop. I've told many about SeaFoam, but some people seem to want to do it the hard way. By the way, I also swear by PRI-G fuel additive for long-term gasoline storage. I keep 100 gallons of gas in tanks for emergency use. We are in a rural, wilderness area. I was introduced to that by survival expert, Steve Harris. He said he's had gasoline that was 10 years old still run equipment, because he'd added PRI-G to it (you can buy here on Amazon). Of course, you have to remember to add more PRI-G each year -- that's the catch. So our rule of thumb is, PRI-G for long term fuel storage -- and SeaFoam for month to month. Also -- this price is right! Of course, when you compare the cost of equipment breakdown, and having to take anything to a mechanic, this is almost free. However, apples to apples, this price is cheaper than Walmart -- and up to $4 cheaper per can than many auto supply and hardware stores. Can't say enough good things about this product! Highly recommended.

This stuff is amazing. Highly recommend for anyone who does their own oil changes, wants to help fuel injectors or anyone with a slight knock. Have used as a fuel treatment and oil treatment. Friend uses in his lawn tractor as well when it ran rough after the winter storage.

Works good.

Definitely worth the money. I had not added a fuel additive in over 5 years. This almost immediately stopped the lag between accelerator push and engine response. It says it is good for 3000 miles and you can also add it to the crankcase as well. Don’t let the price deter you.

I’ve been using Sea Foam SF-16 in both my outboard motor and sailboat, and it has proven to be an invaluable product for maintaining engine performance. This motor treatment is incredibly versatile and effective, making it a staple in my marine maintenance routine. One of the standout benefits of Sea Foam SF-16 is its ability to clean and lubricate the entire fuel system. It effectively removes harmful deposits and residues that can build up over time, ensuring that my engines run smoothly and efficiently. This is particularly important for marine engines, which can be prone to issues due to the harsh operating environment. I also appreciate how Sea Foam stabilizes fuel. This is crucial for my sailboat, which sometimes sits unused for extended periods. By adding Sea Foam to the fuel tank, I can be confident that the fuel remains fresh and free from moisture, preventing potential engine problems when I’m ready to hit the water again. Another great feature is its ease of use. Simply adding the recommended amount to the fuel tank is all it takes to start seeing the benefits. I’ve noticed a significant improvement in engine performance, with smoother idling and better throttle response. It also helps reduce emissions, which is a nice bonus for the environment. Overall, Sea Foam SF-16 is a fantastic product that I highly recommend to anyone with an outboard motor or sailboat. It keeps engines clean, running smoothly, and protected from the elements, making it a must-have for any boat owner.

was pretty skeptical about this stuff at first but figured it was worth a shot since basically every mechanic on the internet swears by it. added it to my gas tank before a fill up and after a couple of drives i genuinely noticed the engine running smoother and the idle felt way more stable. if you have an older car or one that has been sitting for a while this is one of the easiest and cheapest things you can try, totally worth it.