ERYONE Silk PLA Filament 1.75mm, 3D Printer Filament Silk PLA +/-0.03mm, 1KG Spool, Silk Red Blue Green

I have had a few rolls of Eryone now and every roll has been a pleasure to use. Prints great and not 1 single problem on any roll I have had.

This is an excellent filament that provides brilliant print quality and shiny finish.I was initially impressed with how easy it was changing to this filament.I changed from a different brand of pla to this silk pla quickly and with no difficulties.The first print I did was the low poly vase model.Each side of the vase is very linear with good layer adhesion and only 1 artefact, that was due to the bed level being slightly off.For a first print this was very impressive, and the 'silk' nature of the filament really shines when under the light.The second print I did was the Koch Snowflake vase. This time with the bed levelled properly, the part came out flawless. The surface finish is very even and the model is strong, and would not snap when dropped on a hard surface.Finally the third test print I did was part of an RC plane fuselage that I designed.This had fairly thick walls, and unlike the other 2 models, was one continuous parallel line. This really showed how little artefacts appeared on the print.I also found that this made the silk really pop, as unlike with the snowflake vase, there was only 1 direction for the light to reflect off and so really gave the appearance of a metal-like material.Overall this is a brilliant filament, that benefits from the silk to give a metal-like look, with a good representation of the copper colour that it is based off.

The media could not be loaded.  The blue purple black tri colour is the best I have ever used, looks fantastic on all prints and the colour blends really well so you don't get those streaky lines.

First things first... When you look at the attached images - bear in mind that the 'artifacts' seen on the print are my fault, not the fault of the filament. I forgot that given the size of the upright parts, that if left unsupported, they would start wobbling around the higher up i got 🤦‍♂️🤦‍♂️On to the review...The ERYONE SILK GOLD PLA is a lovely colour and really does have a lovely shine to it.It's lovely to print with, and worked straight out of the box on my standard PLA settingsThe temperatures used were 195 for the hotend, 65 for the bed.The only real couple of negative comment i have on this filament is to do with the tollerance on the diameter.It is advertised on amazon as 1.75mm +-0.02mm, but on the spool, it is labelled as +-0.05 - I'm not sure which is incorrect, however my personal experience is the below:I measured the diameter at various points along the spool throughout the few prints i have used this filament for so far, and the diameter seems to actually vary from 1.70-1.85, giving anywhere between -0.05 and +0.10mm away from the 1.75 it is supposed to be.The 1.70 and 1.85 measurements did seem to be one-off variations however, and the majority of measurements i took were within +-0.03 of 1.75mm which i would consider more than acceptable.This is definitely going to become my 'go to' for gold filament.I have also used their red PLA and black PETG in the past, and have never had any issue with either of those.Great job ERYONE, i'll be back for some more when i get low! :)

As per title, just great filament.Prints like a dream, no stringing or adhesion issues.And wow the colours just pop.Deffo buying more and other colours.220/70

Yet another beautiful tri-coloured filament from Eryone!As with all other Eryone filaments, which I've tried, this prints super smooth with standard pla settings.I appreciate the environmentally friendly cardboard spool, aswell as the resealable bag which insures that moisture is kept out.Highly recommended!

Kept seeing peoples prints on a Facebook printing page so decided to give it a go.Wow you need to try this at least once.Tangle free and excellent quality.Lasts ages and the finish you get on prints always impresses.Comes sealed in a bag with silica gel.

I love this filament, its the first Tri-colour filament I have used but i'll be buying it again.It works a treat on geometric shapes, but just as good on other prints, really catches the sunlight.I have printed a lot of crystaline structured items and they look wonderful.The filament seems a little thick on pre-extrusion but I haven't had any issues printing.I'd definitely recommend this.

I’m new to 3D printing and everything it entails. This filament is not only great quality in my opinion but also beautiful. The colours are amazing. I will be buying again.

The media could not be loaded.  Easy to print, not stringing and it seems to not require a lot of cooling like other silk filaments I used in the past.The transition to Black/Green is clean and provide a really nice effect – I will definitively try to find more alien stuff to print with this filament.I’ve printed these 2 models using a speed of 120mm/s outside walls, 280mm/s inner walls and 350 for the infill on a flsun v400 – There is no wrapping or stringing and support were super easy to remove.Adhesion was great on a PEI sheet, I just flex a little the sheet and the prints were released.The filament was also properly package in a vacuumed sealed bag.

TLDR: Two Thumbs Up, a solid "5 Stars." Nice Tri-Color Silk PLA. Be choosy what you print -- the tri-color really pops with multifaceted vases and shapes. 215-220 deg C print temp seems like the starting point for adjustment. Resealable bag and cardboard spool with remaining filament length/weight gauges are nice touches.First, let me state I am no expert. I've been 3d printing as a hobby for a few months under 2 years, and I've used three different printers. The only printer used with this filament was a FLSUN Super Racer delta, with MicroSwiss extruder, dual 5015 cooling fans, bi-metal hot end, and PEI build plate. It was connected to a FLSUN Speeder Pad running Klipper (input shaping was turned off).E-Steps, Extrusion and PID tuning completed prior to testing; followed TeachingTech's calibration guide and the official Klipper websiteAll models sliced with Prusa 2.6.0 alpha 5; models may have sliced differently in official release 2.5.1Filament packaging consisted of a cardboard box with viewing window and resealable plastic bag. The 1KG roll of tri-color silk filament was neatly wound on a ~140g cardboard spool. My spool had a mild dent, but not enough to impact using filament rollers.The spool was embossed with the Eryone Logo, and a sticker provided gauges indicating approximate remaining filament length and weight gauge as well as filament recommended printing values:Nozzle Temp - 190-220 deg CBed Temp - 55-70 deg CPrinting Speed - 30-100mm/sTemp Tower: 220 deg C provided a nice print; as the temp went down, the filament started to fall apart and I stopped the printTetrahex Ripple Vase by ChrisTheViolaNerd on Printables- Scaled down to 60% (160mm tall with a base of 120mm)- 0.9mm extrusion width at 0.15mm height in vase mode- 220 deg C- 65mm/s speed- Printing time = ~5hrsThis print came out great and I think if I lowered the height to 0.12mm or 0.1mm, and reduced the extrusion width it may have looked even better.Franken Mug by Sterna on Thingiverse- Scaled up to 500% (175mm tall with a front to back length of 155mm)- 0.45mm extrusion width at 0.20mm height- 220 deg C- 135mm/s speed- Printing time = ~18hrs- Approx filament = 123 metersThis was a long print and organic supports were used. Some of these supports broke during printing, so ignore any sagging filament as it's not the filaments faults. Although not part of this review, there are 4 more parts to print to complete this Franken Mug.You will notice banding for two different reasons, and sometimes at the same time. Neither are the filament's fault from what I see. 1) the filament may twist between the extruder and travel through the Bowden tube and present a different color when it gets to the nozzle, and 2) the hot end didn't maintain a constant temp which causes layers to look shinier or more dull. Printing slower may help with a "minimum layer time" cooling set.Articulated Spirit Dragon by AKinferno on Printables- 100% scale- 220 deg C printing temp- very nice first layer- failed to print twiceFirst time I suspect a filament clog caused "air printing"; second time the infill was noticeably under-extruded and didn't stick to the previous layer; again maybe due to a clog. Keep in mind both files were sliced on the PrusaSlicer 2.6.0 alpha 5.Overall, I like this filament, and it prints nicely. I will update this review with better photos after additional testing. You would need to calibrate your printer and test this filament before starting on any long prints. Also, I would choose a different color next time--something brighter--as I already have a lot of purple, blue and black filament.

Me ha gustado mucho el color y como disimula las capas, el filamento se imprime muy bien a 210-215°C.

The media could not be loaded.  Filamento fantastico, rilascia sfumature molto omogenee dei vari colori. La finitura è ottima, ovviamente tanto dipende dalla stampante e dalla velocità della stampa. Questa ciotola ha richiesto circa 100 grammi di materiale, quindi non necessita di stampe lunghe per esporre tutti i suoi colori, a differenza di altre bobine.Risultato oltre le mie aspettative, adesione al piatto di stampa con solo 60' e stampa a 210'.