Zigbee Bridge Pro Hub, Wi-Fi & Zigbee Dual-protocol, App Control, Multi-device Management, Compatible with SONOFF Devices

I’m trying to get some home automation set up in an old stone wall house. I have managed to pair temperature and humidity sensors and motion sensors (all Sonoff). But some sensors are dropping off; I believe this is because some are too far away from the hub. So the solution will be to extend and build a mesh network with powered (router) Zigbee devices. The problem has been finding devices that will pair to this hub. Aqara devices will not pair. I can confirm Ikea tradfri light bulbs will pair with this hub. So I will use these to build and extend my mesh network. These bulbs must be within 5cms of the hub during pairing. My solution was to power the bulb in its final position, then bring the hub to the bulb. I did this by powering the Sonoff Zigbee bridge pro off a usb battery power bank, then used the ewelink app for the pairing process. Then returned the hub to its normal operating position. So far this has worked. I will update this review when I can see if this improves the end sensors devices dropping out. Update Dec 2024 I now use 3 of these. This is a farm with several outbuildings. My Wi-Fi signal can reach the other outbuildings (just). so I put a Sonoff Pro bridge hub in the Polytunnel (where sheep are lambed) and another in the Portacabin (farm office). The Zigbee devices are then connected to the Sonoff hub in their location . From the Ewelink app I can turn on/off lights, kettles; monitor temperature in all the different locations. The furthest distance would be about 50 metres from the internet router in the house. The Portacabin used to be a problem running wi-fi smart devices. Its a metal building so wi-fi from the house didn’t operate at the back of it; but the Wi-Fi signal did reach the front of the building; so I sited the Sonoff pro bridge there and all the Zigbee devices inside the portacabin work perfectly when paired to that hub. In the Polytunnel the Sonoff Pro hub is used to control a water heater, light and a kettle. At 2 am in the morning when you need to move quickly to assist a sheep lambing. I have a routine that switches on the lights that get me from the house to the Polytunnel, turns on the water in the kettle in the Polytunnel, and switches everything off in the house as I leave. Then I have another routine that turns off things in the Polytunnel as I leave to go back to the house, which includes switching on the electric blanket so I can climb into a warm bed. I have mostly used Sonoff devices with these hubs, ie motion sensor, door sensor, temperature humidity, button switches and no neutral switches. The IKEA tradfri bulbs have been super reliable at extending the mesh. The biggest problem I’ve had is getting uk Zigbee smart plugs. I did get Woolley Zigbee smart plugs of Amazon (I have 8). They are often unavailable. But they are superb, very reliable with this hub and Ewelink. They offer scheduling and power monitoring. If your having problems with things going off line, then consider either extending your mesh with the bulbs and smart plugs; or divide your space with a second hub, having first ensured your wi-fi reaches the weak area. Then there’s the house. It’s been undergoing some renovation. The old (oil) boiler is about 50 years old. It used to be wired into one those manual timers. The ones that you clicked in out little pegs to turn it on off; and every time the time changed you had to reset the timer. (Misery). The kitchen got updated with underfloor heating, still working off the old boiler. The plumber cut the wiring off the old timer and wired on an ordinary plug on the end. It’s plugged into a Woolley Zigbee smart plug ; and it’s running the central heating. The smart plug can be scheduled to come on/off at whatever time I want. But more useful is the Sonoff temperature monitor. It’s in the kitchen and a scene on Ewelink controls the Woolley plug turning on/off the heating, Simple and cheap and it works.

Very impressive. It’s small and very lightweight, so it’s easy to tuck away somewhere and it connected straight away to the network. I’ve only added a few switches so far, but they were easy to add and each work perfectly.

This SONOFF Zigbee Bridge Pro has been a game-changer for automating tasks across my property. I’ve installed temperature and humidity sensors in my outbuildings, and when conditions reach certain thresholds, the hub triggers smart plugs and appliances such as heaters, dehumidifiers, or fans. It’s reliable, responsive, and integrates well with the app. Setup wasn’t smooth initially, which is why I’ve rated it four stars. Pairing devices was slow and inconsistent until I contacted SONOFF support. They were genuinely helpful and gave a key tip: connect and update the hub and devices close to your router or the item itself before mounting them. Once I followed that advice, everything paired instantly and worked first time. Signal range varies depending on walls. In my wooden cabin with no internal barriers, the hub reaches about 15 metres. In my garage, which has brick walls, the signal weakens at just over 6 metres. For what they are, the devices feel a little expensive, but the functionality makes up for it. The hub now manages multiple devices smoothly, and the dual-protocol support for Wi-Fi and Zigbee makes it flexible for future expansion. If you’re building a smart home or automating remote zones like sheds or garages, this hub is a solid foundation. Just follow the setup advice to avoid frustration.

Updated Review: The problem was with a Tp-link range extender I was using to get 2.4ghz access Once I'd figured out how to set my router to 2.4ghz and connect directly, the Sonoff Zigbee Bridge Pro Hub has been rock-solid for the last 2 months. Original review: Bought this hub and a bunch of Sonoff Zigbee switches, buttons and sockets. The devices themselves are excellent, but this hub goes offline at least once a week rendering all the devices inoperable. Moved it right next to my router but no improvement. Updated the firmware. No improvement. Driving me mad. It'll have to go.

My heart sank when I opened the box and saw the micro-USB charging port. That told me the design was a few years old. I completely failed to set my router to 2.4GHz. For testing purposes I did manage to setup a 2.4GHz hotspot but that is the phone only not the router. In 2026 I think it is reasonable to expect 5GHz and Type C USB. Update: I managed to check my router settings. I noticed it was dual-band and other devices had successfully negotiated a 2.4Ghz connection. The Sonoff Bridge failed to negotiate a 2.4GHz connection. Duh to Sonoff. I am angry at such design lazyness and have reduced rating by a star.

The SONOFF Zigbee Bridge Pro does exactly what it’s supposed to. Setup was straightforward in the eWeLink app, and it’s been solid and reliable ever since. I’m using it with SONOFF TRVs and Zigbee switches, and the whole system works like a dream — stable connections, quick responses, and everything stays nicely integrated in one place. If you’re building a SONOFF/eWeLink-based Zigbee setup, this hub is an easy recommendation.

I bought this to connect some motion detectors and may add extra kit as time goes by. First thing to do is to install the app before you power up the bridge. The set up was very easy... the app located the device and it was set up in about a minute. Connecting the motion detectors was also very straight forward, so no issues to date. The Bridge is small and very light, roughly the size of 2 match boxes. It comes with a meter long cable with USB to micro USB A plugs. You aren't supplied with a power plug, so bear that in mind when deciding where to leave the box. The Bridge has 2 LEDs, one of which remains on as a status indicator (blue) I'm not really pushing it as far as connecting a lot of devices, nor am I using a lot of functions or routines, so I can't really comment on its performance, other than it works as I want with the 2 detectors I'm using. That's pretty much all I can say about it.

I really have been up and down with Sonoff over the years but they have been very reliable now. When it comes to this Zigbee Bridge Pro, it is tiny. It is about the size of 50 mm by 50 mm roughly. It is not very thick either. I think in today's technology sector that everything has to be small. Now I'm one of these people that I would prefer a larger product and better aerials and coverage rather than having a small item with limited range and small aerials. Now the aerials in that are going to be only 50 mm high. I've mounted it in the window, and you will see that from my photo. I'm sorry for the dirt. I can't get to the actual window because it's really high up, but that's another story. The actual item is going to be very limited, and I've found that it didn't go very far. That's why I give it four out of five. The one star is for the limited range going through a window and then outside.

Çok başarılı.Kendi ürünleri ve diğer bazı markalarla bağlantı özelliği ekstra.Çok kolay kurulum.Şık ve küçük Kesinlikle tavsiye ederim. SONOFF ZigBee ürünleri mükemmel..

Ok

Four months ago i purchased a new house and a whole home heatpump system, but the temp felt off. The family was always baking (summer time). So i purchased 3x of the SONOFF SNZB-02, a ZigBee temperature sensors to spread around the house. ZigBee because i already had 3x eero 6 pros and wanted to use their built in ZigBee network. eero's zigbee implementation is total garbage. Devices would go offline daily, re-pairing was the only way to get them back online. In addition you have to use the Alexa app, which offers zero configuration, tracking, battery life status, or history. So after research i went with the zb bridge-p (SONOFF Zigbee Bridge Pro). Its been fantastic. Zero devices have gone offline. History reporting. Firmware updates. Device configuration options. All in a clean and pretty interface. But the best part is home assistant integration. By using AlexxIT's SonoffLAN integration, all features are working. No firmware flashing or warranty voiding required. The only downside i have found is that the devices have to be on your lan network. When they were on my IOT isolated network, home assistant could not interact. 10/10 recommend.

Enkel liten gateway som lätt hittar mina Zigbee-prylar. Installera appen i din mobiltelefon, anslut och hitta din gateway och sedan de enheter som du vill styra via din gateway. Ett måste för den som inte vill hålla på med molntjänster.

Ótimo produto de acordo com o anúncio!