2 for Chamberlain LiftMaster Craftsman Garage Door Opener Remote 893LM 893Max 971LM Universal

Excellent and easy to set up

Didn't work for master lift Chamberlain pro

Would not connect to unit

Great garage door opener. Easy to connect and configure no problems at all

Liftmasterの87504-267Door Openerに使用しましたが、3つのスイッチの内一番右のスイッチだけが登録可能でした。 一番大きな左側スイッチは登録できませんでした。 一台しか登録不要なので、使用には問題ありませんが。

Needed another garage remote for our additional car. We have an old LiftMaster opener. If anything, the instructions included with the remote was a lifesaver and VERY easy to understand. The learn buttons are color coded and you follow the directions based on the color of your learn button on the garage opener. I was able to program my remotes and use them immediately. I did not realize I had pushed the learn button too long and reset the existing remotes and had to reprogram them too. Once you get a hang of it, the process is really easy. Comes with a clip that you can put on the front visor. The remote is is small and does not take much space. It is a great replacement and functions well.

Super easy to program for my Chamberlain orange button garage door. Great value for money and is very portable. I have never had any issues with connectivity, and they work from at least 30 meters away. Definitely very happy with this purchase!

I was a bit weary because of the reviews talking about the problems with connecting more than one door - but decided I'd give it a go. Glad I did. It works well and the setup was easy. There is only one thing in the instructions I find confusing. First they describe how to teach the remote to send the signal matching your door opener - click this many times on the button for that colour of the button on your opener - this is all crystal clear, steps 1-4 in the printed instructions. So at that point you have the remote programmed and it will work as if you got the remote dedicated to your opener. Now your opener needs to learn to obey your new remote. Simple process - first press the Learn button on the opener, and within thirty second or so press the button on your remote. Easy - and written clearly on my opener, and probably most of them. This is the final step 5 in the printed instructions and it is where there is some ambiguity. it says: "Press the learn button on the back of the opener, after the learn LED glow steadily, press and hold the remote button..." This "after the learn LED glow steadily" just says that your click will be acknowledged by the LED going on. If you take it to mean press the button and hold until the LED glows steadily - it is still strictly speaking correct, as the LED will go on right away. The video instruction are even more suggestive - the "Make sure the LED stays on" caption is shown and the motion of the video is paused for a second, presumably to give you a moment to read it. So what is the problem here? Well, if you just reach for your learn button by stretching yourself from the ground - you may not see the LED going on. And if you keep holding the button for long enough - 6 seconds or whatever your opener says - you will erase all info, disconnecting all previously connected remotes. I recommend this product. It is a solid device, and a good value. I also recommend the vendor to change the instructions for the step 5 to read "Press the learn button on the back of the opener BRIEFLY. The learn LED will glow steadily. Press and hold the remote button..."