HEMUDU Single Desk Monitor Arm Mount Stand Fit for 13 inch to 32 inch Flat Curved Computer Screen with Swivel, Height Adjustable, Rotation,Holds up to 35KG, Black

Whilst this post doesn't state it supports a 49" ultra wide monitor, when looking at the specs, the weight it supports is more than enough for my 11kg monitor. You can't rotate but I would never need to for this monitor. All works perfectly and great quality. - Past monitor arm experience - I've used monitor arms in the past and for this large monitor however when a monitor arm says up to 10kgs, they're usually going to slump somewhat when you get near that mark. So the perk of this is the value and the weight it states it can support up to and I can confirm there's no slumping! - Quality - Reviewing how this is put together, it's a simple and effective design, in particular where the monitor and the mount meet. You can adjust the angle and really tighten it for those heavier monitors. There's been no slumping at all. It swivels effortless should I need to turn it and if the monitor arm back was high enough rotate would be simple. - Implementation - Very easy. It took me about 20 minutes to install and that was because I had to clear/move the desk and find a pair of plyers to make sure the backs were super tight. Installation is like most monitor arms. - Size - as you can see from the pics, it works great for my monitor. There are 4 holes at the back for different height adjustments. I maxed out at the top level which aligns to the original stand this monitor came with. It's nice and flat and doesn't take much space from the back of the desk when connected as you'll see. I actually really like the design of the pole. It's wider than a standard pole and I think that looks visually better - certainly gives confidence in the strength. Overall, I feel like this is a great value product and I'm pleased I came across this. I would recommend.

The item is sturdy, slips at the back for cable management (this was a nice surprise for me, I hate spaghetti junction wires!) The mounts themselves are impressive to me because you simply slot them in and if you need to adjust the height, ust lift them up and place in the holes at the height you want as opposed to having a fixed height with no scope to adjust. The written instructions were a bit confusing because it is written in broken English or Google Translate was used, but the diagrams are SPOT ON, got the whole thing built in about 15 min or so (could be less but this is what it felt like). Summary: Good product, great for saving desk space, easy to assemble, value for money and would reccomend to anyone who wants a stacked monitor experience

Great price, easy enough to assemble, the height settings are fixed increments, but they seem to work fine, for me at least, swivel range quite good, rotate is fine (if you need or can use it) and tilt range is fairly small but again this is fine as this stand is really as direct monitor stand replacement so should really considered as such so this is basically a stand, and you would be facing the monitor front and centre, so does not work in the same way a monitor arm would with multiple directions of travel. Monitor size, I have 38" monitor attached, which weighs 8kg, with no issues, of course it wont rotate as it is too big, but this is not an issue for me, The only real issue I experienced is with the tilt, the 'reinforcement knob' is tucked away, and is quite small, so once the monitor is in place and you need to adjust the tilt, it is a bit tricky. Overall a decent stand if you are looking for a direct replacement for your current monitor stand, it connects to the desk easily with a generous range for the c-clamp, note however, there is no rubber on the upper part of the clamp that sits on the desktop, I have placed my own bit of rubber under it, and the only other issue I had was that the spacers provided were too short, luckily I had some longer ones which I used, nice to have a little more space on the desktop under the monitor too.

Really strong desk mount. I've got a 32" curved monitor at the bottom and a 24" monitor at the top, they fit really well, it was a little difficult to get the right height at first but that was due to space around my desk. If you're desk is backing onto a wall it's a challenge to get this all fitted, instructions are clear though so if access isn't an issue you should be fine. Tilt function is good, top monitor is tilted slight down and can be moved easily. The monitors will wobble at any little movement in the desk, due to the height and weight, but I've got no concerns of the arm not being strong enough, it attaches to the desk very securely, would highly recommend.

Have used this with 34” monitors but currently just got my 27” on there, easy to put together, can position the monitor really well, doesn’t damage the desk when clamping, holds the monitor really well and easy to adjust them up and down, great value for money, hides cables very well too and clears desk space up very well

Very sturdy, easy to assemble. Various mounting options depending on your needs. No additional tools needed, everything is in the box. Highly recommend.

Great edition to my standing desk that was also from amazon for just over £100 and still works great. The monitor are mean theres not need for the monitor legs to be on the desk which I found took up way more space than I liked. it was easy to install fits me Lenovo Legion 27 monitor perfectly. The stability is perfect and it offers more than one hight to have the monitor with a tilt option. while keeping your cable out of site making for a cleaner set up

I already had a 2 screen stand but the arm protruded out the back of the desk. These have been much better. Easy to assemble and being individual it gives more flexibility to put the screens where you want. Good sturdy stand with hight adjustments

Strong clamp holds securely to the desk. Smooth movement and tilt adjustment. Frees up desk space and improves posture. Excellent build for the price.

👍🏻

Support de bonne qualité, le seul bémol étant qu'aucune protection caoutchoutée n'est prévue au niveau de la partie supérieure de la pince.

Very good quality, sturdy and plenty of adjustment. Works perfect with a 27" below, and 27" above. Exactly what I was after.

Ontzettend goed product voor de prijs!