HUANUO Gaming Triple Monitor Stand, Full Motion Articulating Triple Monitor Mount Fit 17 to 32 inch Flat/Curved LCD Computer Screens with Clamp, Grommet Kit, Silver

Overall I love this item and unlike my last purchase, which I had to return, I plan to keep this one. PROS: Has two extension arms, meaning you have the middle part that connects to each side, plus an arm AND an additional arm, most would only have the middle part and one extension arm. This means for guys like me with 3 32" monitors you have the option of having them sit horizontally without having to sacrifice, IE one monitor is partially blocked by the other. As I noted I had to return a different brand and that was because of this. Weight - My monitors are roughly 15 1/2 pounds each and I didn't have any issues moving the arms around with the monitors connected. Says a lot about the stability that I'm talking about this product being able to hold a 15 lb monitor on a second arm extension, as opposed to one. Install time - About 10-15 minutes, 20 if you factor that I'm a moron who didn't check placement before setting everything up, then forced to disassemble and reassemble in the proper area. Bad joke aside was straight-forward setup but use your own screwdriver, the one that comes with this is limited. Range - Similar to what I've used in the past. Easy to lift upwards, downwards, tilt the monitor, rotate to portrait. Standard stuff CONS: Only one. The middle pole is a decent size, but not tall enough for me. If you're like me you want your monitors higher to reduce strain on your eyes (I'm 6' so I prefer not having to look downwards so much). In my situation even when I had the middle area at it's highest my middle monitor was too low. I ended up using a stand for my middle monitor instead of connecting. Checked with the manufacturer and unfortunately there wasn't an option to buy a taller stand or add an extension, so while I give this 5 stars IMO it's really 4.5 and only because of this limitation. TLDR - Great product, no regrets purchasing it. Can hold 3 horizontal 32" monitors but middle might be lower than you prefer.

It's awesome! Holds up all 3 of my monitors perfectly. Installation was easy since all you have to do was follow the instructions they gave you. Super nice quality and fits well. Has a very sleek appearance as well. Overall, definitely worth the money.

Welcome to a review that will completely change the way you think about your workspace setup. Today, I will take you on a journey through my personal experience with the HUANUO Triple Monitor Stand, a game-changer that has transformed my productivity and comfort levels. If you're tired of the cluttered mess on your desk and the strain on your neck and eyes, read on to discover how this innovative monitor stand can bring your work or gaming setup to the next level. When it comes to monitor stands, the HUANUO Triple Monitor Stand takes the cake with its outstanding design. Equipped with gas spring arms, this stand offers smooth and effortless adjustments that will make you feel like you're in a sci-fi movie. The sturdy construction ensures stability even with three 17 to 32-inch flat or curved LCD computer screens, giving you the freedom to create an immersive visual experience. The sleek black finish adds a touch of elegance to any workspace, making it a perfect fit for both professional and gaming environments. Let's be honest; no one wants to spend hours fumbling with complicated installation processes. With the HUANUO Triple Monitor Stand, the setup is a breeze. The package includes both a clamp and grommet kit, providing versatile options to suit your desk configuration. As someone who often struggles with assembling furniture, I was pleasantly surprised by the clear instructions and user-friendly design. In less than 30 minutes, I had my three monitors securely mounted and ready to go. Say goodbye to neck strain and eye fatigue! The HUANUO Triple Monitor Stand is a lifesaver when it comes to ergonomics. Its adjustable gas spring arms allow you to position your screens at the perfect height, tilt, and angle, ensuring optimal viewing comfort. I found that this improved my posture and significantly reduced the discomfort I used to experience during long working or gaming sessions. It's like having a personal ergonomic assistant right on your desk. If you're anything like me, productivity is a top priority. The HUANUO Triple Monitor Stand is a game-changer in this department. With three screens seamlessly integrated into a single setup, multitasking becomes a breeze. Whether you're a content creator, programmer, or stock trader, having multiple monitors allows you to effortlessly manage different applications, documents, and windows simultaneously. The increased screen real estate provides a panoramic view, enhancing your workflow and enabling you to tackle complex tasks with ease. Let's face it, a cluttered desk is a distraction. The HUANUO Triple Monitor Stand helps you reclaim your workspace by eliminating the mess of individual monitor stands. The cable management system keeps your cables neatly organized and out of sight, giving your setup a clean and professional appearance. This not only enhances the overall aesthetics of your workspace but also promotes a clear and focused mind. Say goodbye to the tangled mess of wires and hello to a tidy and zen-like environment. Who says work can't be fun? The HUANUO Triple Monitor Stand adds a touch of entertainment to your workspace. Whether you're indulging in a gaming session or binge-watching your favorite series, the immersive experience created by the triple monitor setup is nothing short of incredible. I couldn't help but feel like I was transported into the heart of the action, with vibrant visuals and seamless transitions. This added entertainment value is a delightful bonus that brings joy to your work breaks or leisure time. In conclusion, the HUANUO Triple Monitor Stand has revolutionized my workspace and transformed the way I work and play. Its innovative design, easy setup, ergonomic benefits, and productivity-enhancing features make it a must-have for anyone seeking to take their workstation to the next level. Bid farewell to cluttered desks, strained necks, and limited screen real estate, and say hello to a world of productivity and comfort. With the HUANUO Triple Monitor Stand, you'll be well on your way to a head-turning setup that will make your colleagues or friends green with envy. Don't miss out on this game-changing solution – grab yours today and take your workspace to new heights!

The stand is fairly easy to assemble. Just understand that this isn't something you will be putting together in 5 minutes! Expect a good 30 minutes to an hour. You can do this as 1 person. If this is going on a wood desk or a glass desk, be cautious! This may crack or damage the desk! They sell a metal plate for the glass desk as well as for the wood! If like me, your desk is wood with uneven surface, you may want to take an old mousepad and cut it a little larger than the foot and use that as a 'matt' for under the foot of the top and then use a plate (purchasable) for the bottom to protect the desk from damage. I used a small piece of wood being my desk was up against a wall and it hides the piece of wood. Once the foot was secured and the central mast was solid, not going anywhere then the arms were able to be put in place for the monitors to be put on with no damage to the desk. The only 'complaint' I have is the central monitor's limited positioning. It is virtually fixed to the mast. There is no moving closer (away from you) or towards you (away from the mast) to adjust the view for comfort. On each point on the arm there are lock screws to fix their position. This helps with their sturdiness however it doesn't help with the monitors themself. If you want to 'fix' the monitors themself, there is no way to do that. Bump them, and they can move a little and you are now working on getting them just right again. Overall, I am very satisfied with the stand, all the accessories offered FOR the stand, and the price. They even offered a mount bracket for my monitor that had no VESA mount to convert the desk stand mount into a VESA mount!

I was a bit concerned because this stand is only rated for 32" monitors and my center monitor is 34" (3440x1440, curved). But my side monitors are only 24", so I thought it would work and it does. This is a VERY WELL MADE and sturdy stand! Good solid aluminum supports, well documented instructions, and extra hardware. It was easy to put together and adjust. I do plan to upsize the left (vertical) monitor because a 24" (1920x1080) is just too narrow for a portrait layout. Update: Confirmed that a Dell 27" (2560x1440) gaming monitor will fit in the side position combined with a Dell 34" curved gaming monitor in the center position. Barely, but it fits, even in landscape orientation. I keep mine in vertical/portrait orientation. One minor problem, not worth of a star reduction. The gaming monitors have insets for the VESA connection plates, which means the slide-in plate on the stand won't slide-in. I have to disconnect the end plat from the stand, screw both that plat and the VESA plate to the monitor, then hold everything in the air while reconnecting to the stand. Stand-off bushings were provided to offset the VESA plate for this purpose, but I can't use them because the provided short screws are too short and provided long screws are still too long and won't tighten without potential damage to the screen. The long screws should be a few mm shorter. Their length should be exactly the length of the short screws plus the length of the bushings.

VERY sturdy, when I was doing research trying to figure out which to buy because they look all the same almost and many are cheaper, i decide to not go cheap because the one I had was cheaper even though it worked it had issues with stability a bit, but this one I noticed is very durable and sturdy, I can turn one arm all the way out opposite direction and it doesn't wobble much. At first I had issue with Weight of monitor tiliting down but after I put more muscle into tightening the bolt it fixed the issue. Good idea if you have a thin desk to add a piece of wood or 2by4 for extra stability, cheap fake wood desks bend too much not a mount issue, it's a desk issue. I would recommend mount the middle first then move the arm forward past the middle monitor to mount next monitor, noticed that was the easiest way for me to make it all fit nice and tight to each other

Yes I am giving this item one star to catch your attention of the monumental task your about to place onto yourself. Do not buy this type of triple monitor mount if you are faint of heart. This thing will test you to your very core and bring you to your knees, but it works great once you make it right for you if you can master it and show it whose boss. Yes I realize I may not be using it it in the perfect way, but this thing is an akward nightmare that is almost sentient. I have made it work and am using it to max capacity, but it has been quite the experiment to get it to a stable enough point where I can justify this is better than using the stands my monitors came with. It's been lots of trial and error, multiple busted monitors, lots of experimentation, lots of reinforcement, and lots of fine tuning. I work from home and have attached 3 32 inch monitors to this thing all horizontal. Whitch I do not recommend because while the description says it can support that, it really limits the range of motion of the 2 adjustable swing arms and you have to be careful not to bang the monitors into each other when adjusting or careful not to bust the screen of your middle monitor with the corner of the side monitor or just destroy the inner monitor corners all together. With 3 32 inch monitors this takes up the whole with and then some of 6 feet. And I can not pull the side monitors as far inward as I would like to get more of a half circle effect. Like other reviewers have pointed out, the C clamp really puts a lot of pressure into a very small area of your mounting surface. You can drill a hole in your desk but the hardware seems a bit thin to do this. Hindsight, I would have given more consideration to wall mount options. Because I like lots of surface space, no drawers, and simple solid wood tables are pricey and a dining table as the desk I would need would be ridiculous; l opted for a 6ft plastic folding table as my desk. I made sure to buy some metal C clamp reinforcement plates before setting this up for the first time. There was so much downward force from the C clamp, this contraption would have caved in the table and twisted it in half if I had let go completely. I did a little bit of wood working on a 2x6 scrap for the bottom of the clamp and used a thick plastic cutting board for the top of the clamp. And then added in the metal C clamp reinforcement plates for good measure. Trust me, it actually looks decent and not ugly like it sounds. I also mounted a clamp to the wall to grab the middle pole to keep this from ever falling forward (later on, I made it months ago but never mounted it to the wall until after the events below like an idiot). After using this set up for a few months, I noticed the C clamp was slipping away from the table. Like a moron, I did not remove any of the monitors before readjusting. I had my wife keeping things stable while I was under the desk to readjust the C clamp but the whole assembly fell forward and while she caught it, 2 of my 3 LG 32 inch gaming monitors got busted. I had to purchase replacement monitors but made sure to take a metal handle and run it across the backside of the C clamp and secure it to the 2×6. This way the C clamp cannot back away from my desk without taking the whole 2×6 with it. Then I added my security clamp/mount to the wall as well. This thing comes with plenty of spare hardware and parts to fine tune it to suit your exact needs for what you mount to it. Assembling it is a nightmare and the the directions would do a better job as bird cage lining. Pay attention to each arm segment. While all 4 looked the same, they are not and the directions will have you a bit off kilter. I had to unassemble and reassemble several times to get this thing right. Carrying this thing is about as easy as carrying a lifeless metal robot with heavy metal arms swinging every where ready to destroy anything in your path. Trying to add or remove one of the side monitors is rough as the spring loaded arm will fight you and it about takes 2 people to add or remove a monitor. You mount a versa plate with a plastic block attached to it that slides into the mechanical arm, but the arm moves up and down when trying to get it to lock into place. It's especially fun to remove a monitor as the spring loaded arm will keep popping up and relocking the monitor in place. Hence why I said you need 4 hands. You can adjust the tension on so many diffrent places that it's great for fine tuning. To wrap this up, this thing works well if you have the determination of a warrior but at times it can be like arm wrestling an octopus. I have 2 other mounts made by this brand and they have been fairly easy to work with since I am not pushing them to the make like this hefty boy. It is nice being able to grab a monitor and hoist it up in to the air to demonstrate things on the screen to a bystander. This is also a good option for a standing desk as you would just need an elevated surface for your mouse and key board because the monitors can lift pretty high with a baby's touch. So think long and hard about purchasing this, but it's a good unit and made well. I'm only giving it one star because it's been one **** of a fight making this thing work the way I want it too and using it with 3 32 inch monitors and a plastic table is a fool's errand but I was determined to win this fight.

Worked as described! Strong, adjustable, highly recommend!

After doing lots of research on monitor stands and solutions for three monitors, a lot of people recommended using three single monitor arms instead of a triple monitor mount due to stability issues found with a lot of triple monitor arms, especially as I was mounting three 27 inch monitors. I really did not want to go down this path as I wanted my setup to look as clean as possible without too many arms being mounted to my desk. I decided to risk it and order this triple monitor stand after reading some positive reviews. It arrived and it took me between 1-2 hours to set up which I thought was relatively reasonable given I had never set up monitor arms before. Installation went very smoothly, there was a worry that I may damage my Ikea worktop as it is veneer with particleboard (which the instructions for this mount said is not a suitable desk to mount on), but I decided to go ahead anyway. I did add a bit of hardwood between my desk and the clamp to give it a bit more strength and so far it has been perfectly fine. The mount itself is super adjustable and very stable. I've managed to get all three of my 27 inch monitors perfectly aligned, and there is enough space to angle them inwards. You could probably fit 32 inch monitors on here quite easily. I have had it all setup now for about a month and the monitors have not shifted even one bit. The outer monitors do wobble a little bit if my desk is wobbled or when I raise/lower my desk with the sit/stand feature, but its not a lot of wobble, and during normal usage (such as typing on my keyboard) they barely move. When they do wobble, they always return to their set place and do not shift at all. Having switched from using the stands that come with the monitor to this triple monitor arm, I have gained so much more desk space and my setup looks super clean and professional which is exactly the reason why I purchased this mount. If you are in a similar position as me, and are not sure whether this mount will suit you, I am sure you will be very happy with your purchase!

Llegó a tiempo, excelente conductor de entrega y el producto funciona bien, paciencia y un poco de tiempo, bastante simple, método de ojal para mí y muy bonito. arrived on time, great delivery driver and product works well, patience and a bit of time, simple enough, grommet method for me and very neat looking

I was hesitant to purchase this as I don't like the design of the staggered/tiered arms which look terrible in the photos. I was after a sleeker, minimalist design, despite the good reviews. Fortunately, my monitors are against the wall, and the arms are hidden between the wall and monitors. The adjustment is infinite and it's more than capable of holding 3 x 27" monitors side by side with plenty of space to have them angled towards me, rather than flat against each other (like other arms). This is 10/10 from me.

Easy to assemble Can hold my very heavy 36" monitor with no problem.

Génial !!! Super bonne qualité et montage très simple, je recommande.