Dust Separator with 10 Gallon Stainless Steel Tank, 99.5% Efficiency Cyclone Dust Collector, High-Performance Cycle Powder Collector Filter, DXVCS003, White

I generate a-lot of dust both wood and metal shavings and i am Very impressed with this Dust separator works as advertised and captures 99.5% of the dust and debris there was literally nothing in my shop vac when i was done testing this will save me more then it cost overtime and keep my shop vac working like new for years to come I own the matching stainless steel shop vac which is an absolute beast when it comes to suction power! If you are in the market for a quality made dust separator thats is portable and efficient this is worth every penny

This appliance works so well that after using it, we purchased a second canister. It really does help saving our vacuum filters from getting clogged, saving us time to change filters and the cost of buying filters. I would recommend this canister to anyone thinking about buying one.

The separator was shipped in the factory box and arrived undamaged. Assembly consists of attaching the cycle-separator to the lid with six screws. The wheels are installed with four screws. Total time to unbox and assemble was around ten minutes. The casters appear to be more than robust enough to support the separator. Fit and finish was impressive. Connections - there have been some reviews complaining about the diameter of the hose that came with the dust separator and with connecting it to a shop vac. I connected the cyclone to my large Bosch shop vac with a standard 2 1/2" hose that comes with most full size shop vacs, without the need for fittings or adapters. The shop vac hose fit over the top fitting for the cyclone. For connections to hand-held power tools, my miter saw, and multiple utility accessories, I use a 30' Cen-Tec, 1 1/4" hose. These hoses have quick connect adapters that can fit just about most sanders, saws, routers, miter-saws, etc. This hose fits perfectly inside the intake port on the cyclone with no adapters or fittings required. For the previously listed tools, you are not looking for high volumes of air flow. You want high velocity air movement which can easily move dust through your tools to the dust collector. High velocity is best achieved with a reasonably smaller hose, and the 1 1/4" Cen-Tec hose is perfect. I use the same Cen-Tec hose with an extension wand and a floor attachment to clean up sawdust, chips, and shavings from the floor around my lathes. With the Bosch shop vac set to 50%, it still does a great job with this hose. The Dewalt dust separator probably does a bit better at dust separation than my Dust Deputy did. That can be difficult to quantify because I use a HEPA bag in the shop vac. The Dewalt separator appears to have more air flow too, but I could not quantify that without a meter. Even without a scientific comparison, the Dewalt separator definitely gets the job done. Advantages over the Dust Deputy - from my perspective: The ten gallon stainless steel canister adds very little overall height, but the additioal capacity over the 5 gallon Dust Deputy is a big plus. The Dewalt lids securely clamps down to the collection canister. This is a big plus if you are mobile and moving around a space with the separator, as the lid on the Dust Deputy is not secured all that tightly. The casters on the Dewalt also help with mobility, vs the Dust Deputy with is just a bucket on the floor. (Dust Deputy does offer a 5 gallon unit with casters and a stainless steel ten gallon separator with casters too.) Most dust separators work reasonably well, with minor difference relative to efficiency and air flow. If you could qunatify the differences between most of them, it is unlikely that it would make a difference in the real world useage of them. The Dewalt separator is well made, and it works as you would expect it to. It's a good deal for the price, and online reviews are very positive.

This unit works remarkably well. I' m actually quite impressed by it's performance. I have it hooked up to ta Ridgid 6HP vacuum with a bag and HEPA filter and it handles everything I throw at it. Band saw, table saw, jointer, planer, sanders, etc. It traps most of the dust, even the fine dust from my Jet 16-32" drum sander. I tested the set up without the bag in the vacuum and could barely find any trace of fine dust on the HEPA filter or bin. I have no need to change the filter or bags since the separator was installed. Those HEPA filters are pricey. Highly recommended if you are in the market for a small portable dust separator.

99.5% is clearly an understatement. There isn't a single speck of dust anywhere in my shop vac. Like... it's literally clean enough in there to install a screen protector on a tablet. Bonus points for whoever made the cyclonic separator translucent - it's surprisingly fun to watch the dusty bits do a high-velocity pirouette as they go where they're told. Took me 3 min to unbox/assemble - 4 screws for the casters, 6 for the separator), and there were zero signs of any shipping damage. I've only used it once, and was absolutely floored at its effectiveness - VERY refreshing to see a product live up to the marketing hype! Will update if anything changes, but I don't anticipate that happening. Thank you, DeWalt!

This item is available at CostCo for $96 and tax which I did not realize when I made this purchase. That being said, I anxiously went to open my shop vac after a week of fairly decent work, assuming I would have to clean my filter as always. When I tell you the interior of my shop vac looks pristine, I'm not kidding. There's not a speck of anything in there. Absolutely everything was left in the canister. I am completely satisfied, I honestly don't care about the $30, I am so grateful to not be cleaning and buying filters 😭 I use it primarily for extraction on my scroll saw and my CNC machine, both of which generate a lot of dust and used to kill a lot of filters. This thing is an absolute money saver and game changer. It was easy to put together but takes up a decent little footprint. It fits well in my space but make sure you're accounting for the hoses. The casters help. Please know that this is not a powered item, it does require an external vacuum cleaner to connect to. I knew that going in but reading the reviews I can see some people got confused. It does make the sound a bit louder. But honestly still totally worth it imho.

Incorporated this into our floor sanding operations and I’ll save$1000sin dust bags over time. We absolutely have to use bags to keep dust to a minimum and we fill them fast, however a 12 gallon shop vac bag can only be filled with 6-8 gallons of dust at best. I run this w/ clRke12 but running w/ a ridged ( Home Depot) vac the dust collection is amazing. This fills up and virtually none in the vacuum itself . Connected to the Clark ( 2 1200 watt motors) it’s rediculios in a good way and can run a 220 volt planetary sander no problem and dust collection is better than expected and saving lots on bags. One complaint , it’s $15 less new than a week ago . CApitolism , go figure . It is just a canister w, no motors . Still 5 stars. Super easy to assemble, like 5 min and basic as it gets

Works great with my planer. It's easy to setup and feels like a quality product. My only issue is that it is smaller than I imagined. This is my fault, but it fills up quickly...too quickly.

Ottima fattura! Sto valutando di acquistarne anche un’altro 👍🏻

Cumple por completo lo que promete en la descripción, el único detalle que noté fue que usando éste separador de polvo la fuerza de aspirado disminuye un poco a diferencia de usar la aspiradora sola pero en contraparte extiende considerablemente el tiempo de vida de las bolsas de la aspiradora y el filtro, además de que los materiales son de muy buena calidad, acordes a las necesidades del taller.

Brilliant function. I used it together with my concrete grinder. Before I had to change bag and clean filter ever 10th minute. With this contraption I can grind for 2h and the bag is far from full. I would have given 5stars if some hose adaptors would have been included. I had to buy DeWalt car cleaning kit to get a hose and some size adaptors

Wish I bought it years ago. I have a well outfitted wood shop and this separator will hook to most of my tools with adaptors and makes clean up a breeze. Almost nothing makes it to the vacuum! Love it. Doesn’t replace a large dust collection system but close.

Absolut Top, also habe es zusammen mit einer Betonsanierungfräse in Betrieb gehabt. Habe 110qm damit geschliffen und brauchte nicht mal eine Maske. Kein Dreck in der Luft. Der Anteil der in den Staubsauger kommt ist gering. Somit hat der Sauger auch immer vollen durch Zug. Absolute Kaufempfehlung.