PC-Products PC-11 Epoxy Adhesive Paste, Two-Part Marine Grade, 4lb in Two Cans, Off White 640111

This stuff is simply amazing. Works great as window caulk, sealing around outdoor cables, patching holes in siding, and many other applications. This holds up while other products from Home Depot will fail within a few years. It's worth the price to use this stuff and not have to worry about it in the future. The only other product that can compete with this stuff is PC Woody. This is easier to work with and lasts forever.

I have used this product many times over the years. It is my go-to for repair work needing epoxy. Great product.

perfect for vertical applications, nice and thick.

I used the Epoxy Adhesive Paste to repair a crack in my countertop, and it worked perfectly. The application was easy, and it set quickly, making it ideal for my DIY project. The only downside was that I needed to mix it beforehand instead of using it pre-mixed. I highly recommend this product!

This stuff works great drive is very hard and does not crack I will buy this again

Arrived quickly, used to fill eroded areas on windowsill aluminum flashing. Work great re-ordered more.

PC-11 Marine epoxy is great stuff. This large container is much more affordable than the smaller package. This stuff does not cover a huge area, so make sure you save money and buy this one pound package. It's like the rest, mix 2 together and starts to harden up within minutes. It comes out of the tube thick to begin with, like putty, and so it's EZ to apply, especially to large areas or wide gaps, even upside down - it's going to stay in place until cured. It says 30 min working time, but I was ready to apply after a couple minutes of mixing the 2 together to create a new uniform color, I applied it with a stiff putty knife and did not wait to test the half hour work time. I actually applied a 2nd coat on top of the first because although the majority of leak was fixed with the first application, there was a small dribble because of the awkward location. Wear disposable gloves - this stuff is incredibly super sticky - and I cleaned my stiff putty knife with mineral spirts and rubbing with rag. Allow it cure at least 24 hours. It says it cures under water - did not test it but given how super thick this is, I believe it. Solid as a rock.

I've used a alot of epoxy products, mostly related to boats. I commonly mix fillers using fumed silica and milled fiberglass, using epoxy resins like System 3, to fill/decore areas of fo core parts where bolts pass through - so you can bolt to them without crushing the core. Mixing your own fillers is kinda a pain, I was hoping this putty might be an alternative. Unfortunately it cures somewhat soft, almost like a foam where you can dent or compress it easily. It seems to be a great product for gluing, easy to mix, good consistency and bond, but isn't a good filler as it is softer than even say pine - not good for filling fiberglass, metal, anything that is a hard surface. System 3 GelMagic, which is a similar-application of product - a structural adhesive, is a much better filler if you want it to be hard but is much more expensive. Possibly you just gotta pay or mix your own.

Cumple con lo que indican, me sirvió. Buen producto.

Works good but the PC-7 is the better product for gluing soapstone.

Best epoxy I ever used.

Used this pack to fill a crack in a retaining wall that was moving. Wall has not moved in more than year! Ideal where a larger amount of strong adhesive is needed. Bear in mind surface prep as otherwise will fail at the interface.

Ideal for smaller jobs. I used it to fair the leading and trailing edge of a sailboat rudder. I tried another two part putty which was too stiff to smooth with a spatula. After steeing for a day or two, it sands easily, althuogh it would be a lot of work if this was used for a large surface like a boat hull.